Author Index

A

  • Aalami, M.R. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
  • Ababaf Behbahani, Mohammad Hosein Effects of air injection at rotor blade row tip region of an axial compressor on its performance under inlet distortion conditions [Volume 53, Issue 3 (Special Issue), 2021, Pages 1729-1744]
  • Abazari, Amir Musa Analysis of an Auxiliary Household Underfloor Heating and Domestic Hot Water System Using Solar Energy in a Cold Area [Volume 54, Issue 5, 2022, Pages 1081-1100]
  • Abbasalizadeh, Majid Optimal Layout of a Typical Telecommunication Center with the Help of Computational Fluid Dynamics and Artificial Neural Networks [Volume 52, Issue 11, 2021, Pages 2969-2984]
  • Abbasalizadeh, Majid Experimental Investigation of Thermal Performance of Pulsating Heat Pipe at Angles Close To the Horizon [Volume 53, Issue 11, 2022, Pages 5445-5460]
  • Abbasi, A. Investigation of the Wear Behavior of Graphite Steel (GSH48) in Ultrasonic Peening Process [Volume 50, Issue 3, 2018, Pages 529-540]
  • Abbasi, Abbas Experimental Investigation of Heat Transfer Enhancement by Acoustic Streaming in a Closed Cylindrical Enclosure [Volume 44, Issue 1, 2012, Pages 11-20]
  • Abbasi, Arash Uncertainty Propagation Analysis in Free Vibration of Uncertain Composite Plate Using Stochastic Finite Element Method [Volume 52, Issue 12, 2021, Pages 3503-3520]
  • Abbasi, E. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
  • Abbasi, Kaveh Investigation on the Effect of Pressure and Radius of Contact Surface Curvature on the Friction Coefficient in Contact Surfaces of Interference Fit Joints [Volume 52, Issue 8, 2020, Pages 2123-2134]
  • Abbasi, M. An Analytical Investigation into Effects of Fracture Dispersion Coefficients and Thermal Conductivity on Geothermally Fractured Reservoirs [Volume 50, Issue 2, 2018, Pages 359-368]
  • Abbasi, Mohammad ibration Analysis of an AFM microcantilever with sidewall and top surface probes based on the couple stress theory [Volume 48, Issue 2, 2016, Pages 137-146]
  • Abbasi, N. Experimental Investigation and Finite Difference Modeling of Cutting Tool Temperature Distribution During Ultrasonically Assisted Turning [Volume 50, Issue 3, 2018, Pages 657-670]
  • Abbasi, Omid Reza Numerical study of the effect of left coronary artery stenosis on vascular tissue oxygenation [Volume 53, Issue 3 (Special Issue), 2021, Pages 1767-1782]
  • Abbasi, S. Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
  • Abbasi, S. Numerical Simulation of Tip Leakage Flow Structure in the Transonic Axial Compressor in Different Performance Conditions [Volume 51, Issue 2, 2019, Pages 471-482]
  • Abbasi, sarallah Effect of blowing on flow-induced noise reduction in a rod-airfoil [Volume 53, Issue 3 (Special Issue), 2021, Pages 1783-1798]
  • Abbasi, sarallah Numerical Investigation of Flow Structure and Performance of Centrifugal Pump with Cavitation [Volume 54, Issue 1, 2022, Pages 55-74]
  • Abbasi, Yosef Enhanced Extended State Observer Based on Trajectory Linearization Control for External and Internal Disturbances [Volume 54, Issue 6, 2022, Pages 1319-1340]
  • Abbasi, Zahra Spatial Elasticity Tensor in Eulerian Rate Type Constitutive Equations [Volume 43, Issue 2, 2012, Pages 1-8]
  • Abbasi, Zahra Deformation of Blunt Projectiles during Penetration into Deformable Medium Metallic Targets [Volume 42, Issue 1, 2011, Pages 77-87]
  • Abbasian, Saman Reconstruction of Electrical Tomography Images based on Parameter Estimation Method in Inverse Heat Transfer [Volume 53, Issue 1 (Special Issue), 2021, Pages 483-498]
  • Abbasian Arani, Ali Akbar Experimental study on heat transfer and pressure drop of TiO2-water nanofluid [Volume 46, Issue 1, 2014, Pages 79-88]
  • Abbasian Arani, Ali Akbar Effect of Vortex Generator on a Wavy Wall Heat Exchanger Performance for Turbulent Nanofluid Flow under a Magnetic Field [Volume 52, Issue 2, 2020, Pages 493-508]
  • Abbasian Arani, Ali Akbar Analysis of the Heat Transfer in a Multilayer Living Tissue Using the Galerkin Weighted Residuals Method [Volume 52, Issue 9, 2020, Pages 2609-2626]
  • Abbasian Arani, Ali Akbar Hydrothermal performance of trapezoidal fin equipped with vortex generator and hole: Investigation of the effect of vortex generator and hole position [Volume 53, Issue 3 (Special Issue), 2021, Pages 1963-1980]
  • Abbasian Arani, Ali Akbar Numerical simulation of salt gradient solar pond by employing the solar radiation estimating function considering wall-shading effects [Volume 53, Issue 5 (Special Issue), 2021, Pages 3385-3400]
  • Abbasi khazaee, Bijan Spatial Elasticity Tensor in Eulerian Rate Type Constitutive Equations [Volume 43, Issue 2, 2012, Pages 1-8]
  • Abbasi Varzaneh, Hamidreza Energy and Exergy Analyses of the Performance of a Spark Ignition Engine Using Two-Zone Combustion Model [Volume 51, Issue 4, 2019, Pages 61-70]
  • Abbasloo, Abdollah Investigating the effect of various working fluids in cascade refrigeration cycle integrated with thermal desalination system [Volume 55, Issue 9, 2023, Pages 1063-1088]
  • Abbas Nejad, Ali The development of power-law preconditioning approach for simulation of unsteady viscoelastic flows [Volume 55, Issue 3, 2023, Pages 381-406]
  • Abbasnia, Ali Estimation of Stress Concentration Factor of Elliptical Cutout in the Composite Sheets under Tensile Load [Volume 52, Issue 8, 2020, Pages 2081-2092]
  • Abbassi, A. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
  • Abbassi, A. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
  • Abbassi, A. Numerical Study on the Effect of Air Diffuser Angle on the Flow Field and Contaminant Dispersion in a Ventilated Room [Volume 50, Issue 4, 2018, Pages 873-882]
  • Abbassi, Abbas Numerical Heat Transfer by Nanofluids in a wavy walls Microchannel using Dispersion Method [Volume 51, Issue 4, 2019, Pages 121-130]
  • Abbassi, Abbas Numerical Simulation of Low-Density Lipoprotein Concentration Boundary Layer in a Straight Artery and the Effects of Wall Shear Stress [Volume 52, Issue 11, 2021, Pages 3143-3154]
  • Abbaszadeh, Behnam An investigation on bend curve in the transition zone on web warping of channels with variable width in the flexible roll forming process [Volume 48, Issue 4, 2017, Pages 423-434]
  • Abdi Aghdam, Ebrahim Investigation of the response of a multi-zone simulation code equipped with blow-by sub-model in a dual fuel spark-ignition engine [Volume 53, Issue 5, 2021, Pages 3035-3056]
  • Abdizadeh, Gholamreza Numerical Investigation of Hybrid Wick Structure Effect on Thermal Performance of a Thin Flat Heat Pipe [Volume 53, Issue 11, 2022, Pages 5485-5504]
  • Abdolahi, S. Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
  • Abdolahifar, Abolfazl Aerodynamic Performance Improvement of Hybrid Darrieus-Savonius Vertical Axis Wind Turbine [Volume 52, Issue 7, 2020, Pages 1865-1884]
  • Abdolahifar, Abolfazl Aerodynamic Performance Investigation of a Vertical Axis Wind Turbine Instead of Conventional Ram Air Turbines of Airplane [Volume 52, Issue 11, 2021, Pages 2985-3000]
  • Abdolahzade Gavgani, M. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
  • Abdolhoseini, M. J. Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
  • Abdolkarimi, Elahe Sadat A New Direct Filtering Approach based on the Interactive Multiple Model Method in the Global Positioning System/Inertial Navigation System Integration [Volume 54, Issue 12, 2023, Pages 2725-2740]
  • Abdollah, Amir Experimental Investigation of Heat Transfer Enhancement by Acoustic Streaming in a Closed Cylindrical Enclosure [Volume 44, Issue 1, 2012, Pages 11-20]
  • Abdollahi, Hassan Increasing the Sensitivity of SiO2/Al Micro Cantilever Infrared Detector Based on Micro Electromechanical Systems Technology by Optimizing of Dimensions [Volume 53, Issue 8, 2021, Pages 4717-4728]
  • Abdollahi, Mohammad Experimental verification of indirect bridge mode shape identification using transmissibility of a passing vehicle [Volume 53, Issue 6, 2021, Pages 3529-2548]
  • Abdollahi Nia, Masoud Head-on Collision Avoidance Path Planning with Model Predictive Control [Volume 54, Issue 8, 2022, Pages 1737-1760]
  • Abdollah Nezhad, Qasem Thermo-Economic Evaluation of a Power and Freshwater Production System Including a Liquid Metal Magnetohydrodynamic Unit Driven By a Concentrated Solar Tower and Biogas [Volume 53, Issue 11, 2022, Pages 5551-5572]
  • Abdolmehdi Hashemi, S. Energy and Exergy Analyzes and Evaluation of Traditional Flatbread Bakeries [Volume 50, Issue 6, 2019, Pages 1389-1402]
  • Abdolmohammadi, Masood Optimization of the Turbines Locating in the Wind Farm [Volume 52, Issue 9, 2020, Pages 2387-2402]
  • Abdolnejad, Hossein An Analytical and Experimental Study on Dynamics of Newtonian Falling Drops in Inertia Regime with Low Reynolds Numbers [Volume 52, Issue 11, 2021, Pages 3033-3044]
  • Abdullah, Amir Analysis of Residual Material and Machining Error on Straight and Corner Curved Paths in Roughing of WEDM [Volume 45, Issue 2, 2013, Pages 119-137]
  • Abdullah, Amir Effects of Roughing Parameters in WEDM on Groove Width and Gap [Volume 47, Issue 2, 2016, Pages 23-34]
  • Abdullah, Amir Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2022, Pages 5627-5644]
  • Abedini, R. Design and Construction of an Electronic Tiltmeter Calibrator and Estimation of Calibration Uncertainty [Volume 50, Issue 5, 2019, Pages 1113-1122]
  • Abedini-Nassab, Roozbeh TI Magnetophoretic Capacitors for Storing Particles and Cells in a Tri-Axial Magnetic Field [Volume 55, Issue 5, 2023, Pages 643-658]
  • Abediny, S. Design and Implementation of Intelligent Systems Detect the Driver’s Lack of Concentration [Volume 50, Issue 5, 2019, Pages 1145-1154]
  • Abedi Ravan, Bahram Feasibility study of single point incremental forming of aircraft canopy for polycarbonate sheet [Volume 53, Issue 4 (Special Issue), 2021, Pages 2751-2768]
  • Abghary, Mohammad Javad Design and analysis of mechanical behavior of a novel lattice auxetic structure based on rigid rotating mechanism [Volume 55, Issue 2, 2023, Pages 179-192]
  • Abiri, Anna The Drag Coefficient Prediction of a Rising Bubble through a Non-Newtonian Fluid [Volume 52, Issue 4, 2020, Pages 863-880]
  • Abjadpour, Arash Solution of Radiative Transfer Equation in Two-Dimensional Media with Real Gas through Zone Method and Box Model [Volume 41, Issue 2, 2010, Pages 11-20]
  • Abolfazli, Ehsan A FSI Simulation of Thromboembolism in Carotid Artery Bifurcation: Roles of Bifurcation Dividing Angle on Arterial Hemodynamics [Volume 45, Issue 1, 2013, Pages 29-38]
  • Abolghasemi, Abolghasem Simulation of Effective Parameters on Desalination Water Using Capacitive Deionization Method [Volume 53, Issue 11, 2022, Pages 5595-5612]
  • Abolghasemian, Reza Buckling analysis of tapered laminated composite channel-section beam-columns subjected to combined axial load and end moment [Volume 55, Issue 4, 2023, Pages 515-542]
  • Abolmasoumi, A. H. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
  • Abolzadeh, Ramin Aerodynamic Design of a Hypersonic Glide Vehicle Based on the Cone-Derived Wave rider Configuration Method [Volume 55, Issue 7, 2023, Pages 797-818]
  • AbouAli, Omid Numerical study of the effect of left coronary artery stenosis on vascular tissue oxygenation [Volume 53, Issue 3 (Special Issue), 2021, Pages 1767-1782]
  • Aboufazeli, Nima Experimental study on effective parameters on vertical axis wind turbine performance [Volume 53, Issue 5, 2021, Pages 2771-2790]
  • Abtahi, Mahdi Numerical analysis of chaotic dynamics in vehicle along with design of chaos controller using fuzzy fast terminal sliding mode control [Volume 53, Issue 4 (Special Issue), 2021, Pages 2539-2556]
  • Abyar Firouzabadi, Hamid Effects of Roughing Parameters in WEDM on Groove Width and Gap [Volume 47, Issue 2, 2016, Pages 23-34]
  • Adabzadeh, Hamid Energy harnessing from water waves by a piezoelectric energy harvester with and without ore-like tip; an experimental study [Volume 55, Issue 10, 2024, Pages 1195-1206]
  • Adeli, S. Thermal Analysis for Diesel Engine Exhaust Manifold with Regard to the Boiling Phenomenon and Compared with Experimental Results [Volume 50, Issue 4, 2018, Pages 711-726]
  • Adibi, Hamed Experimental and Numerical Investigation of Fatigue Behavior of Polylactic acid Components Made by Additive Manufacturing Method [Volume 53, Issue 6, 2021, Pages 3703-3716]
  • Afkhami, Sina Numerical Analysis of Cross Section Time Variation Effects of the Supersonic Exhaust Diffuser [Volume 53, Issue 3, 2021, Pages 1469-1486]
  • Afkhami, Sina Numerical Simulation of Flow Separation in a Thrust Optimized Parabolic Nozzle [Volume 54, Issue 5, 2022, Pages 985-1006]
  • Aflakiyan, Ali Solving the Forward Kinematic Problem of Under-Constrained Cable Driven Robots for Online Control Purposes [Volume 52, Issue 1, 2020, Pages 43-56]
  • Afra, B. Proposing Immersed Boundary-Lattice Boltzmann-Lattice Spring Algorithm for Simulation of 2-D Deformable Plate in Steady Flow [Volume 50, Issue 4, 2018, Pages 683-696]
  • Afra, B. Simulation of Two Circular Particles Falling in Vertical Channel: Combination of Immersed Boundary Lattice Boltzmann Method and Discrete Element Method [Volume 51, Issue 2, 2019, Pages 313-328]
  • Afrand, Masoud Numerical/Experimental Investigation of the Presence of a Protuberance in a Convergent – Divergent Nozzle in Supersonic Regime to Control the Thrust Vector [Volume 53, Issue 9, 2021, Pages 4887-4904]
  • Afrasiab, Hamed Finite Element Modeling of Fluid-Solid-Piezoelectric for Investigating the Ways of Improving the Performance of the Micro Energy Harvester in the Fluid Flow [Volume 54, Issue 1, 2022, Pages 31-54]
  • Afsari, M. M. Numerical investigation of Joule heating effects on electroosmotic flow through a microchannel with triangular cross-section [Volume 47, Issue 1, 2015, Pages 81-90]
  • Afshari, A. Experimental Investigation of Flow Induced Noise Around Circular Cylinder by Measuring Unsteady Surface Pressures [Volume 51, Issue 2, 2019, Pages 329-346]
  • Afshari, Abbas Numerical Analysis of Parameters Affecting Turbulent Boundary Layer Trailing-Edge Noise [Volume 53, Issue 1 (Special Issue), 2021, Pages 437-452]
  • Afshari, Ebrahim Investigation of the Humidifier Performance of Adding Gas Diffusion Layers Around Membrane for Fuel Cell Application [Volume 53, Issue 3, 2021, Pages 1653-1666]
  • Afshari, Ebrahim Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Afshari, Ebrahim Numerical Modeling of Li-Ion Battery Temperature Control System at Low Initial Temperature [Volume 54, Issue 9, 2022, Pages 2085-2102]
  • Afshari, H. Thermo-Mechanical Stress Analysis in a Rotating Radially Graded FG-Disc with Non-Uniform Thickness [Volume 50, Issue 1, 2018, Pages 33-46]
  • Afshari, H. Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2018, Pages 759-772]
  • Afzalian, Mahdi Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
  • Afzalian, Mahdi Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Aghaei, A. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
  • Aghaei, Mohammad Numerical simulation of water hammer in various fluids due to a fast valve closure [Volume 53, Issue 7, 2021, Pages 4171-4188]
  • Aghaei, Mohsen Geometric Optimization of Ultrasonic Fatigue Test Specimens Based on Thermo-Elastic Behavior [Volume 54, Issue 10, 2023, Pages 2399-2410]
  • Aghaei-Ruzbahani, Milad Prediction of the Critical Buckling Load of Grid-Stiffened Composite Plates Using Vibration Correlation Technique [Volume 52, Issue 1, 2020, Pages 221-232]
  • Aghaie Khafri, Mehrdad Predicting Sheets Forming Limit Diagrams by Numerical Simulation of Nakazima and Modified Marciniak Tests [Volume 52, Issue 3, 2020, Pages 527-542]
  • Aghajanloo, B. Fabrication of Bipolar Plates of the Fuel Cell from Stainless Steel 304 by Hot Metal Gas Forming Process [Volume 50, Issue 3, 2018, Pages 589-600]
  • Agha Mirsalim, S.Mostafa Improvement of one-dimensional simulation of national engine with consideration of heat transfer and mechanical loss effects in the turbocharger [Volume 51, Issue 4, 2019, Pages 71-80]
  • Agha Mirsalim, S.Mostafa Steady Simulation of the Flow inside the Internal Combustion Engine Turbocharger’s Turbine [Volume 51, Issue 6, 2020, Pages 1469-1486]
  • Aghamohammadi, Hamed Improvement in the flexural properties of basalt fibers/epoxy-aluminum laminate composites using multi-walled carbon nanotubes [Volume 51, Issue 3, 2019, Pages 81-90]
  • Aghanajafi, Cyrus Simulation of the Role of the Anti-Angiogenic Therapy in Fluid Flow Behavior and Macromolecule Transport into a Heterogeneous Solid Tumor [Volume 54, Issue 7, 2022, Pages 1481-1512]
  • Aghareb Parast, Mohammad Sadegh Study of Fretting Fatigue Behavior of Cylinder head Aluminum Alloy, with and without nano-Clay-Particles [Volume 54, Issue 4, 2022, Pages 885-904]
  • Aghasizade Shaarbaf, S. Identification of Tire Force Model Using Experimental Data of a New Scaled Test Rig for Design of Nonlinear Slip Controller [Volume 51, Issue 1, 2019, Pages 187-200]
  • Aghayari, Jafar Optimal Vibration Reduction of the Flexible Shaft-Disk-Blades System Using a Set of Nonlinear Energy Sink [Volume 52, Issue 12, 2021, Pages 3425-3444]
  • Agheli Hajiabadi, Mohammad Mahdi Study of the Motion Behavior of Soft Fiber Reinforced Actuators Based on Fiber Angle [Volume 53, Issue 8, 2021, Pages 4565-4580]
  • Ahangari Sisi, Zahra Design and Experimental Validation of an Extended State Observer for Estimating of Uncertainties and Unknown Road Input in a Quarter car McPherson Suspension System [Volume 55, Issue 12, 2024, Pages 6-6]
  • Ahanian, Ali Free vibration and flexural-torsional stability analyses of axially functionally graded tapered thin-walled beam resting on elastic foundation [Volume 53, Issue 6, 2021, Pages 3587-3614]
  • Ahmadi, Ahmad Frequency Domain Analysis of Water Hammer with Fluid-Structure Interaction in Viscoelastic pipe [Volume 52, Issue 4, 2020, Pages 985-1004]
  • Ahmadi, Bahman Denoising vibration signals of rotating machines using probability density function, similarity measure and improved thresholding function [Volume 53, Issue 4 (Special Issue), 2021, Pages 2493-2512]
  • Ahmadi, Goodarz Investigation of the Effect of Ventilation System Inlet Location on Particle Motion in a Room Using Multi Relaxation Time-Lattice Boltzmann Method [Volume 53, Issue 3, 2021, Pages 1457-1468]
  • Ahmadi, Habib Optimization of the Turbines Locating in the Wind Farm [Volume 52, Issue 9, 2020, Pages 2387-2402]
  • Ahmadi, Habib Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Ahmadi, Habib Superharmonic and Subharmonic Resonance Analysis of A Rectangular Hyperelastic Membrane Resting on Nonlinear Elastic Foundation Using The Method of Multiple Scales [Volume 53, Issue 8, 2021, Pages 4535-4564]
  • Ahmadi, Habib Sliding Mode Control of Droplet Size in a Microchannel by Adjusting Syringe-Pump Flow: Experimental Study [Volume 54, Issue 10, 2023, Pages 2239-2254]
  • Ahmadi, Hamed Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Ahmadi, Hamed Comparison of penetration process of 2-layer elastomeric composite with thermoset composite using energy absorption equations [Volume 53, Issue 6, 2021, Pages 3657-3672]
  • Ahmadi, Isa Numerical Analysis of Inter-Yarn Friction Effects on the Single-Layer High-Strength Woven Fabrics under High-Velocity Impact [Volume 52, Issue 10, 2021, Pages 2899-2916]
  • Ahmadi, Javad Actuators redundancy resolution scheme with computational time reduction purpose for parallel cable robots with considering the rupture limits of the cables [Volume 53, Issue 6, 2021, Pages 3479-3496]
  • Ahmadi, Mohmmad Hossein Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Ahmadi, Morteza Micro-Mechanical Damage Analysis of Al-TiC Particulate Reinforced Composites by Peridynamic Theory [Volume 53, Issue 8, 2021, Pages 4701-4716]
  • Ahmadi, Reza Presenting the Traction-Separation Law for Ultrasonic Welding of Glass-Fiber Reinforced Polypropylene Composite [Volume 54, Issue 10, 2023, Pages 2429-2456]
  • Ahmadi, S. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
  • Ahmadi, Salman Planar Object Manipulation with Multi Fingers Robot Located on a Moving Hand Under Rolling Grasp Constrains [Volume 53, Issue 2, 2021, Pages 943-958]
  • Ahmadi, Seyed Ali Three-Dimensional Elastic-Plastic Deformation Analysis of Composite Sandwich Panel under Blast Loading [Volume 52, Issue 5, 2020, Pages 1079-1100]
  • Ahmadi, ziaulhaq Investigation of The Surface Flame Burner Functional Diagram Using Chemiluminescence and Image Analysis [Volume 54, Issue 1, 2022, Pages 235-248]
  • Ahmadian, Bahram Response analysis of primary cilia of the cell to the oscillatory fluid flow by using fluid-structure interaction method [Volume 53, Issue 5 (Special Issue), 2021, Pages 3293-3306]
  • Ahmadian, Hamid Sensitivity Analysis of Rotor Dynamic Behavior to Manufacturing Tolerances Based on Global Sensitivity Analysis and Statistical Methods [Volume 53, Issue 8, 2021, Pages 4501-4516]
  • Ahmadian, Mohammad Taghi Application of a Superelement in Static and Vibration Analysis of Piezoelectric Hollow Cylinders [Volume 52, Issue 5, 2020, Pages 1245-1256]
  • Ahmadian Elmi, Mohammad Geometric Optimization of Highly Conductive Inserts with Variable Thickness Embedded in a Fin [Volume 52, Issue 9, 2020, Pages 2569-2580]
  • Ahmadi-Brooghani, Seyed Yousef Numerical and Experimental Study of Energy Absorption Amount of Functionally Graded Honeycomb with Negative Stiffness Property under Quasi-Static Load [Volume 52, Issue 10, 2021, Pages 2809-2822]
  • Ahmadi-Brooghani, Yousef Relative Humidity Period Influence on Drying Induced Stresses in Intermittent Drying of Clay [Volume 51, Issue 4, 2019, Pages 181-190]
  • Ahmadi Khatir, F. Experimental Investigation and Numerical Simulation of the Pressure Force on the Formation of Metallic Bipolar Plate in the Stamping Process [Volume 50, Issue 3, 2018, Pages 505-516]
  • Ahmadimoghaddam, M.R. Simulation and Optimal Design of Solar Pool for Subsurface Irrigation [Volume 51, Issue 2, 2019, Pages 507-524]
  • Ahmadi Nadooshan, Afshin Effects of Magnetic Field on Natural Convection of Non-Newtonian Fluid in a Square Enclosure with a Central Heat Source [Volume 53, Issue 1, 2021, Pages 259-278]
  • Ahmadi Najafabadi, M. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
  • Ahmadi Najafabadi, Mehdi Investigation of initiation and evolution of delamination in glass/epoxy laminated composites using acoustic emission method [Volume 48, Issue 4, 2017, Pages 411-422]
  • Ahmadi Najafabadi, Mehdi Investigation of Failure Mechanism of the Composite Tubes Made by Filament Winding Process by Acoustic Emission Method [Volume 54, Issue 6, 2022, Pages 1357-1372]
  • Ahmadi Najafabadi, Mehdi Numerical and Experimental Investigations on Fatigue Behavior of Carbon/Epoxy Laminates Toughened by Nanofibers [Volume 54, Issue 12, 2023, Pages 2899-2916]
  • Ahmadi Nodoushan, Afshin Investigation of Power-Law Fluid Flow through a Two-Dimensional Microchannel Based on a Couple Stress Theory-Calculation of Characteristic Length [Volume 52, Issue 7, 2020, Pages 1707-1714]
  • Ahmadi Nodoushan, Afshin Numerical simulation of mixed convection of Bingham fluid between two coaxial cylinders [Volume 53, Issue 5 (Special Issue), 2021, Pages 3417-3428]
  • Ahmadpour, Ali Numerical Simulation of Convective Heat Transfer of Nano-Encapsulated Phase Change Material Slurries in Micro-Channels with Sinusoidal Cavities and Rectangular Ribs [Volume 54, Issue 1, 2022, Pages 169-188]
  • Ahmadpour, Ali Numerical Simulation of Non-Newtonian Blood Flow in A Three-Dimensional Non-Planar Bifurcation with Stenosis [Volume 53, Issue 9, 2021, Pages 4865-4886]
  • Ahmadpour, Aryan Investigation of dust dispersion in urban environment using large eddy simulation method [Volume 55, Issue 11, 2024, Pages 2-2]
  • Ahmadvand, Reza Modified Variable Structure Estimation and Control for Constrained Landing on Mars [Volume 53, Issue 10, 2022, Pages 5055-5068]
  • Aieneravaie, M. Failure Analysis of a Gas Turbine Blade Made of Inconel 738LC Super Alloy [Volume 50, Issue 1, 2018, Pages 103-112]
  • Ajabshirchi, Yahya Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Ajam, Hossein Evaluation of Combustion Models in a Porous Medium with Different Excess Air Ratios [Volume 53, Issue 1, 2021, Pages 65-80]
  • Ajori, Shahram Analyzing the effect of adsorption of Flavin Mononucleotide biomolecule on the natural frequency of biocompatible boron-nitride nanotubes [Volume 53, Issue 4 (Special Issue), 2021, Pages 2577-2588]
  • Ajri, Masoud Modeling and Analysis the Bending Behavior of Soft Pneumatic Network Actuator with Hyperelastic Models [Volume 55, Issue 8, 2023, Pages 1021-1042]
  • Akbari, Ahmad Reza Analysis of the Wear of Railway Turnouts in a Combined Method and Hardening Model [Volume 52, Issue 5, 2020, Pages 1213-1228]
  • Akbari, Ariana Finite Element Simulation and Experimental Evaluation of an Ultrasonic Radiator [Volume 55, Issue 10, 2024, Pages 1261-1274]
  • Akbari, Babak Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless Steel Materials [Volume 52, Issue 4, 2020, Pages 1055-1076]
  • Akbari, Davood Optimization of the Spot Weld Locations for Increasing the Joint Strength of the Welded Plates [Volume 51, Issue 5, 2019, Pages 1097-1105]
  • Akbari, Davood Numerical and Experimental Investigation of the Effect of Parameters in Shear Spinning Process of a Conic Sample [Volume 52, Issue 3, 2020, Pages 543-554]
  • Akbari, Davood Non-destructive evaluation of internal cracks in glass fiber-reinforced polymers using digital shearing interferometry [Volume 53, Issue 6 (Special Issue), 2021, Pages 4063-4078]
  • Akbari, Javad Improving the Milling Machine Stiffness by Optimizing the Internal Stiffeners Layout and the Wall Thickness Distribution of Column [Volume 52, Issue 3, 2020, Pages 687-702]
  • Akbari, M. Three Dimensional Numerical Simulation of a Drop and Drop-to-Wall Interaction under Uniform Electric Field [Volume 50, Issue 4, 2018, Pages 755-766]
  • Akbari, Maryam Corrosion and Vibration: Effective Factors on Orientation Changes of Porous Phase in Grey Cast Iron [Volume 52, Issue 3, 2020, Pages 703-716]
  • Akbari, Maryam Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method [Volume 52, Issue 10, 2021, Pages 2759-2778]
  • Akbari, M. H. Effects of Agglomerate Arrangement on Cathode Catalyst Layer Performance in PEM Fuel Cell [Volume 49, Issue 1, 2017, Pages 203-218]
  • Akbari, Nozar Analytical and Experimental Investigation of Frequency of Oscillation Modes in Combustion Chambers of Gas Turbines [Volume 42, Issue 2, 2011, Pages 27-35]
  • Akbari, Nozar Performance Investigation of Hybrid Darrieus-Savonius Wind Turbine Compared to Straight-Bladed Darrieus Turbine by Three-Dimensional Numerical Simulation [Volume 51, Issue 6, 2020, Pages 1443-1454]
  • Akbari, Sepideh Kinematic Modeling of a Spatial Soft Robot by an Improved Analytical Method Based on Serial Robots [Volume 53, Issue 2 (Special Issue), 2021, Pages 1065-1080]
  • Akbari Alashti, Reza Finite Element Modeling of Fluid-Solid-Piezoelectric for Investigating the Ways of Improving the Performance of the Micro Energy Harvester in the Fluid Flow [Volume 54, Issue 1, 2022, Pages 31-54]
  • Akbari kangarluei, Rostam Experimental Investigation of Thermal Performance of Pulsating Heat Pipe at Angles Close To the Horizon [Volume 53, Issue 11, 2022, Pages 5445-5460]
  • Akbarzadeh, Ali Experimental and Numerical Investigation of Film Cooling Effectiveness on Squealer Tip of a Turbine Blade [Volume 53, Issue 3, 2021, Pages 1521-1536]
  • Akbarzadeh, P. A Power-law Preconditioning Approach for Accelerating the Convergence Rate of Steady and Unsteady Incompressible Turbulent Flows [Volume 51, Issue 2, 2019, Pages 437-454]
  • Akbarzadeh, Pooria Modelling and Experimental Investigation of the Evaporation Suppression Using Floating Covers in the Presence of Surface Flows [Volume 52, Issue 7, 2020, Pages 1193-2010]
  • Akbarzadeh, Pooria Investigation of Electro-Osmotic Micro-Pumps Using Electrical Field Gradient and Asymmetric Micro-Electrodes: Numerical Modeling and Experimental Validation [Volume 54, Issue 1, 2022, Pages 101-122]
  • Akbarzadeh, Pooria The development of power-law preconditioning approach for simulation of unsteady viscoelastic flows [Volume 55, Issue 3, 2023, Pages 381-406]
  • Akbarzadeh, Saleh Transient numerical modeling and experimental investigation of the effect of surface texture on elastohydrodynamic lubrication [Volume 53, Issue 5 (Special Issue), 2021, Pages 3201-3212]
  • Akhavan, Behnaz Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Akhgari, R. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
  • Akrami Nia, Ehsan The Effect of Curvature of Microbeam and Electrode on the Snap-Through and Pull- In Instabilities [Volume 52, Issue 8, 2020, Pages 2243-2260]
  • Alaei, Alireza Coating of AISI 4340 low-alloy steel with austenitic stainless steels and stellite6 cobalt base by tungsten-gas arc welding method and investigation of the microstructure and wear behavior of the resulting layer [Volume 55, Issue 6, 2023, Pages 773-794]
  • Alaeipour, Maryam Sadat Techno-Economic Feasibility of Energy Supply Systems from Renewable Sources of Solar and Biomass in Rural Areas Located In Cold and Dry Climate [Volume 53, Issue 1, 2021, Pages 81-100]
  • Alaie, Mohammad Reze Effect of Electrostatic Field on a Fog Harvester Efficiency with Metal Porous Collector [Volume 55, Issue 1, 2023, Pages 45-60]
  • Alamian, R. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
  • Alasty, Aria Experimental Cathode-Anode Flooding Diagnosis of Polymer-Electrolyte Fuel Cell of Power under 300W Using Adaptive-Neuro-Fuzzy Method [Volume 54, Issue 3, 2022, Pages 615-628]
  • Alavi, Fatemeh Sadat Prediction of femoral fracture pattern using finite element analysis of dual-energy X-ray absorptiometry -based model [Volume 53, Issue 2 (Special Issue), 2021, Pages 1223-1236]
  • Alavi, Fatemeh Sadat The Prediction of Femoral Fracture Location Using Extended Finite Element Method [Volume 53, Issue 8, 2021, Pages 4595-4608]
  • Alavi, Seyed Mahmood Abulhasan Numerical simulation of nanofluid flow in an annulus with porous baffles based on combination of Darcy-Brinkman-Forchheimer model and two-phase mixture model [Volume 53, Issue 3 (Special Issue), 2021, Pages 1897-1914]
  • Alavi Lavsani, Majid Numerical Investigation of Fin Position Effect on the Forced Convection Heat Transfer Inside a Channel in Turbulent Flow [Volume 52, Issue 6, 2020, Pages 1627-1640]
  • Alavioun, Seyyed Shahaboldin Steady Simulation of the Flow inside the Internal Combustion Engine Turbocharger’s Turbine [Volume 51, Issue 6, 2020, Pages 1469-1486]
  • Alaviyoun, Seyed Shahaboddin Improvement of one-dimensional simulation of national engine with consideration of heat transfer and mechanical loss effects in the turbocharger [Volume 51, Issue 4, 2019, Pages 71-80]
  • Albooyeh, Alireza Simulation and Analysis of the First to Fourth Types of Compressed Natural Gas Tanks of Vehicles under the Explosive Loading [Volume 54, Issue 8, 2022, Pages 1895-1916]
  • Alemi, Minoo Impacts of Social Robots in Education and Rehabilitation of Children with Autism in Iran [Volume 52, Issue 8, 2020, Pages 2329-2354]
  • Al Havaz, Matin Effect of Steady Spanwise Blowing on the Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 52, Issue 11, 2021, Pages 3001-3014]
  • Aliakbari, N. Design of Optimal Fuzzy Controllers for Semi Active Vibration Suppression of MultiFloor Buildings Based on a Distributed Parameter Model and Magneto Rheological Dampers [Volume 51, Issue 1, 2019, Pages 133-146]
  • Alibeigloo, Akbar Nonlocal Vibration of Nanobeam Embedded in Viscoelastic Pasternak Foundation with Longitudinal and Rotational Motions with Surface Effects [Volume 54, Issue 10, 2023, Pages 2215-2238]
  • Aligolzadeh, Farid Shape Optimization of Supersonic Ejector to Enhance its Performance in Refrigeration Applications [Volume 52, Issue 6, 2020, Pages 1659-1674]
  • Alijani, Ali Derivation of Explicit Relationships in the Determination of the Natural Frequency of Euler-Bernoulli Cracked Beams on Elastic Foundation the Using Rayleigh Method [Volume 52, Issue 5, 2020, Pages 1229-1244]
  • Alikhani, Alireza Reliability Analysis of An Inertial Navigation System and its Active Fault Detection and Isolation Unit [Volume 54, Issue 4, 2022, Pages 805-820]
  • Alimardan, Amirmasoud Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Alimehr, Ashkan Experimental Investigation of a High Aspect Ratio Rectangular Liquid Jet in Parallel Airflow [Volume 53, Issue 11, 2022, Pages 5429-5444]
  • Alimirzaloo, V. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
  • Alinaghian, Hossein Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718 [Volume 52, Issue 10, 2021, Pages 2629-2646]
  • Alinejad, G. M. Numerical and Experimental Investigation of Effective Parameters on Formability of Al-St Two Layer Sheet Metals [Volume 50, Issue 3, 2018, Pages 517-528]
  • Alinejad, G.M. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
  • Alinia, Yadolah Impact Stress Analysis for the Welding Joint in a Rotary Dryer [Volume 54, Issue 12, 2023, Pages 2843-2860]
  • Alinia, Yadollah Thermal stress analysis for an aluminum die cast die [Volume 53, Issue 4 (Special Issue), 2021, Pages 2687-2702]
  • Alipoor, A. Experimental Investigation of Using Phase Change Materials in Heating System of a Solar Greenhouse [Volume 50, Issue 2, 2018, Pages 327-336]
  • Alipoor, A. Experimental Study of Charge of Paraffin Wax Along with Nanoparticles in an Eccentric Double Tube Heat Exchanger for Storing Energy in a Solar Water Heater [Volume 50, Issue 6, 2019, Pages 1403-1410]
  • Alipoor, Alireza Numerical Study of the Flat Flame Burner Power Effect on the Producing Uniform Temperature Distribution in Cracking Furnaces [Volume 52, Issue 6, 2020, Pages 1379-1396]
  • Alipoor, Alireza Maps of Flame Dynamics for Premixed Lean Hydrogen-Air Combustion in a Heated Microchannel [Volume 52, Issue 9, 2020, Pages 2443-2464]
  • Alipoor, Alireza Numerical Simulation of Liner Vibrations in a Laboratory Combustion Chamber [Volume 53, Issue 2, 2021, Pages 881-896]
  • Alipour, A. An Axiomatic Design Approach to Reduce Repetition in Tail Conceptual Design Process [Volume 50, Issue 1, 2018, Pages 3-14]
  • Alipour, Alireza One-dimensional Combustion Simulation for Different Hydrogen-enriched Natural Gas Blends [Volume 53, Issue 1, 2021, Pages 53-64]
  • Alipour, Atefeh Deformation analysis of single-wall carbon nanotubes: a shell theory based on the interatomic potential [Volume 46, Issue 2, 2015, Pages 1-12]
  • Alipour Lalami, A. Investigation of the Effect of Velocity Slip and Temperature Jump on the Heat Transfer of Nanofluid in a Microchannel Under Constant Heat Flux with Lattice Boltzmann Method [Volume 50, Issue 2, 2018, Pages 255-270]
  • AliSadeghi, Hamed Development of Blade Element Momentum Theory for Unsteady Flow with Regard to the Dynamic Stall Phenomenon [Volume 53, Issue 3, 2021, Pages 1439-1456]
  • AliSadeghi, Hamed Simulation of Steady Incompressible Flow around a NACA0015 Airfoil Using Actuator Surface Method and Mass Corrected Interpolation Technique [Volume 54, Issue 5, 2022, Pages 1047-1080]
  • Alizadeh, A.A. Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2018, Pages 731-742]
  • Alizadeh, E. Experimental Study of the New Design 2.5kW Dead-End H2 /O2 PEM Fuel Cell Stack with New Design to Improve Fuel Utilization [Volume 50, Issue 2, 2018, Pages 369-376]
  • Alizadeh, Ebrahim Experimental Investigation and Numerical Simulation of the Pressure Force on the Formation of Metallic Bipolar Plate in the Stamping Process [Volume 50, Issue 3, 2018, Pages 505-516]
  • Alizadeh, Ebrahim Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
  • Alizadeh, Ebrahim Study of Temperature Distribution of H2/O2 Polymer Electrolyte Fuel Cell in Different Operating Conditions [Volume 52, Issue 6, 2020, Pages 1479-1496]
  • Alizadeh, Ebrahim Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Alizadeh, Elham Mechanical Properties and Structural Behavior of Bone at Nano Scale with Cohesive Element [Volume 53, Issue 2, 2021, Pages 745-776]
  • Alizadeh, H. Stress Measurement on Carbon Steel Specimen by Consideration of Magnetic-Barkhausen-Noise [Volume 50, Issue 5, 2019, Pages 1079-1084]
  • Alizadeh Jajarm, Alireza Experimental investigation on MWCNTs-COOH nano fluid on 3D oscillating heat pipe [Volume 53, Issue 5 (Special Issue), 2021, Pages 3401-3416]
  • Allahdadi, Nazila Numerical Investigation of the Performance of Hydrogen Production Process by Production Gas Recirculation [Volume 53, Issue 1 (Special Issue), 2021, Pages 623-638]
  • Allahverdizadeh, Firouz Enhanced Extended State Observer Based on Trajectory Linearization Control for External and Internal Disturbances [Volume 54, Issue 6, 2022, Pages 1319-1340]
  • Allahyari, E. Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
  • Altaha, Seyed Mahmoud Analysis of Reflux Condensation Phenomena During small Break Loss of Coolant Accident in Bushehr Reactor [Volume 52, Issue 4, 2020, Pages 907-922]
  • Alvandi, Ebrahim FE AND EXPRIMENTAL ANALYSIS IN MATERIAL CHARACTERIZATION OF A356 IN LOWCYCLE FATIGUE [Volume 48, Issue 2, 2016, Pages 147-156]
  • A. Maleki, Vahid Investigation of Vibration Behavior and Crack Detection of a Cracked Short Cantilever Beam under the Axial Load [Volume 47, Issue 2, 2016, Pages 1-12]
  • Amani, Jafar Experimental Study of Flame Stability in SiC Porous Media [Volume 43, Issue 1, 2012, Pages 59-70]
  • Amani, Jafar Experimental study on heat transfer and pressure drop of TiO2-water nanofluid [Volume 46, Issue 1, 2014, Pages 79-88]
  • Amanifard, N. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
  • Amanifard, N. Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method [Volume 51, Issue 2, 2019, Pages 427-436]
  • Amanifard, N. Numerical Investigation of the Effect of Plasma Actuator on the Film Cooling Effectiveness By Fan-Shaped Hole [Volume 50, Issue 6, 2019, Pages 1213-1228]
  • Amanifard, N. Analysis of Corona Wind Effect on Mass Transfer and Energy Consumption in Drying of Moist Object [Volume 51, Issue 2, 2019, Pages 281-296]
  • Amani fard, Nima Numerical investigation of the effect of DBD plasma actuator on performance enhancement of an air-solid particle cyclone separator [Volume 55, Issue 9, 2023, Pages 1135-1156]
  • Amanifard1, N. Numerical Investigation of Upstream Ramp Effects on the Cooling Performance by Cylindrical and Fan-Shaped Hole [Volume 50, Issue 4, 2018, Pages 883-892]
  • Amarloo, A. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
  • Ameli Kalkhoran, Seyed Nader Investigation of Ultra-Precision Machining on Single Crystal Silicon Using Molecular Dynamics Simulation and Experiments [Volume 52, Issue 3, 2020, Pages 731-742]
  • Ameri, M. Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
  • Ameri, Mehran Investigation of Thermal Performance Integrated Collector-Storage Solar Water Heater with Different Reflectors [Volume 45, Issue 1, 2013, Pages 75-82]
  • Ameri, Mehran Simulation and Test of PV/T Air Systems with Natural Air Flow Operation [Volume 43, Issue 1, 2012, Pages 31-40]
  • Ameri, Mehran Thermodynamic and Thermo-Economic Analysis of the Absorption Heat Transformer, Organic Rankine Cycle, and Reverse Osmosis Desalination Combined System [Volume 53, Issue 1 (Special Issue), 2021, Pages 639-654]
  • Ameri, Mehran Investigation of using hybrid nanofluid-phase change material spectral splitter in photovoltaic/thermal system [Volume 53, Issue 7, 2021, Pages 4429-4454]
  • Ameri, Mehran Performance investigation of freezing desalination coupled with carbon dioxide refrigeration system [Volume 53, Issue 5 (Special Issue), 2021, Pages 3351-3366]
  • Ameri, Mehran Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat [Volume 53, Issue 9, 2021, Pages 4999-5016]
  • Amidpour, M. Optimization of a Hybrid Multi-effect Desalination with Thermal Vapor Compression and Reverse Osmosis Desalination System Integrated to A Gas Turbine Cycle [Volume 50, Issue 6, 2019, Pages 1333-1350]
  • Amini, Hassan Investigation of Crack Growth in Deposited and Perfect Titanium/Titanium Nitride Structure by Molecular Dynamic Simulation [Volume 53, Issue 2, 2021, Pages 833-850]
  • Amini, S. Study the Fatigue Behavior of AISI 1045 Steel Using Ultrasonic Fatigue Test Machine [Volume 51, Issue 5, 2019, Pages 1017-1024]
  • Amini, S. Manufacturing a Single Ultrasonic Tool Set of Vibrational friction stir welding in Bending and Axial Modes [Volume 50, Issue 3, 2018, Pages 601-618]
  • Amini, S. Investigation of the Wear Behavior of Graphite Steel (GSH48) in Ultrasonic Peening Process [Volume 50, Issue 3, 2018, Pages 529-540]
  • Amini, Saeed One-Directional and Elliptical Ultrasonic Vibration Assisted Turning of Ud500 Work-pieces [Volume 44, Issue 2, 2013, Pages 93-101]
  • Amini, Saeed Experimental and Analytical Evaluation of the Vibrational Stress Relief Process Parameters on the Steel Specimen Based on the Computational Model [(Articles in Press)]
  • Amini, Saeid Geometric Optimization of Ultrasonic Fatigue Test Specimens Based on Thermo-Elastic Behavior [Volume 54, Issue 10, 2023, Pages 2399-2410]
  • Amini, Y. Numerical Study on the Vortex-induced Vibration of Circular Cylinder [Volume 51, Issue 2, 2019, Pages 455-470]
  • Amini, Yasser Numerical investigation of fluid-structure interaction of a detached flexible plate behind a circular cylinder [Volume 55, Issue 7, 2023, Pages 819-836]
  • Amini Froshani, Javad Numerical simulation of salt gradient solar pond by employing the solar radiation estimating function considering wall-shading effects [Volume 53, Issue 5 (Special Issue), 2021, Pages 3385-3400]
  • Aminivida, Hamed Thermal Stress Analysis of the Carbon Nanotube Reinforced Composite Cylindrical Shells [Volume 53, Issue 10, 2022, Pages 5269-5292]
  • Aminpur, Mazhar Vibration Analysis of Cable-Driven Parallel Robots to Define Critical Speeds [Volume 52, Issue 8, 2020, Pages 2317-2328]
  • Aminzadeh, Milad Modelling and Experimental Investigation of the Evaporation Suppression Using Floating Covers in the Presence of Surface Flows [Volume 52, Issue 7, 2020, Pages 1193-2010]
  • Amirabadi, Hosein Obtaining the equations to predict values of springback and side-wall curl radius of U-bending of DP600 dual-phase steel plates [Volume 47, Issue 2, 2016, Pages 35-44]
  • Amirabadi, Hossein Investigation and Optimization Flat Lapping Process Using Non-Dominated Sorting Genetic Algorithm II [Volume 52, Issue 3, 2020, Pages 669-686]
  • Amirabdollahian, Shahram Simulation and Analysis of the First to Fourth Types of Compressed Natural Gas Tanks of Vehicles under the Explosive Loading [Volume 54, Issue 8, 2022, Pages 1895-1916]
  • Amiri, Hossein Economic evaluation of fixed and floating desalination plants on the shores of Makran [Volume 55, Issue 9, 2023, Pages 1045-1062]
  • Amiri Delouei, Amin Immersed Boundary–Thermal Lattice Boltzmann Method with Sharp Interface: Heat Transfer of Non-Newtonian Fluid over a Cylinder [Volume 47, Issue 1, 2015, Pages 69-80]
  • Amiri Delouei, Amin Investigation of 3-D Nanofluid Natural Convection in Presence of Magnetic Field using Double MRT Lattice Boltzmann method [Volume 51, Issue 4, 2019, Pages 111-120]
  • Amiri Delouei, Amin Analytical Solution of Heat Transfer in a Cone Made of Functionally Graded Material [Volume 53, Issue 1 (Special Issue), 2021, Pages 539-552]
  • Amiri Delouei, Amin Investigation of the Effect of Ventilation System Inlet Location on Particle Motion in a Room Using Multi Relaxation Time-Lattice Boltzmann Method [Volume 53, Issue 3, 2021, Pages 1457-1468]
  • Amiri Hezaveh, A Phenomenological Study of Droplet Behavior Passing through a Porous Medium at Pore-Scale, Using Lattice Boltzmann Method [Volume 50, Issue 4, 2018, Pages 697-710]
  • Amirii, Yasaman Fluid-Structure Interactions Analysis of Tension in An Axon Using Finite Elements Modeling to Investigate Strain Related Neurological Damages [Volume 53, Issue 8, 2021, Pages 4609-4632]
  • Amiri-Jaghargh, Ali Investigation of Flow in Microchannels with Superhydrophobic Surfaces Using Hybrid Direct Simulation Monte Carlo-Navier-Stokes Method with Information Preservation Approach [Volume 52, Issue 7, 2020, Pages 1741-1756]
  • Amirkhani, Masoud Designing and building a dialogue mechanism suitable for RoboPuppet using deep learning [Volume 55, Issue 8, 2023, Pages 919-942]
  • Amjadi, Gholamhossein The Effect of Calcium Carbonate Nanoparticles and Compatibilizer on the Surface Roughness and the Surface Scratch Resistance of the Polyamide 6 [Volume 51, Issue 5, 2019, Pages 1069-1076]
  • Amjadigolpayegani, Ashkan Analysis of Density Wave Oscillations in a Boiling Channel by a New Analytical Model [Volume 53, Issue 3, 2021, Pages 1505-1520]
  • Amjadi Golpayegani, ashkan Modeling and parametric analysis of two-phase fluid stability in boiling process in a thermal channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1861-1882]
  • Amjadi Manesh, Hossian Numerical study of the effect of left coronary artery stenosis on vascular tissue oxygenation [Volume 53, Issue 3 (Special Issue), 2021, Pages 1767-1782]
  • Amoozgar, M. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
  • Anani, Yavar Modeling of hyperelastic incompressible behavior of functionally graded material under bending load [Volume 52, Issue 8, 2020, Pages 2045-2062]
  • Anani, Yavar Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Anani, Yavar Comparison of penetration process of 2-layer elastomeric composite with thermoset composite using energy absorption equations [Volume 53, Issue 6, 2021, Pages 3657-3672]
  • Anani, Yavar Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method [Volume 53, Issue 4, 2021, Pages 2331-2346]
  • Anbarlooie, Behnam Micromechanical failure analysis and tensile behavior of dual phase steel using 2D and 3D RVEs [Volume 51, Issue 3, 2019, Pages 21-30]
  • Anbarsooz, M. Numerical Simulation of a Piston-Type Wavemaker using Lattice-Boltzmann Method with Moving Nested Grids [Volume 50, Issue 4, 2018, Pages 799-812]
  • Ansari, Hamidreza Three Dimensional Design and Finite Element Analysis of Scaffold for Use in Damaged Bone Tissue [Volume 54, Issue 12, 2023, Pages 2801-2820]
  • Ansari, M. Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
  • Ansari, Mahdi Numerical Simulation of Elastoplastic Behavior and Damage Evolution at Various Stress Triaxiality [Volume 53, Issue 12, 2022, Pages 5703-5724]
  • Ansari, Mohammad Experimental investigation of heat transfer and pressure drop in perforated ribs in the solar air heater channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1981-2000]
  • Ansari, MohammadReza 2D Numerical Modeling of Compressible Two-Phase Flows Using Hyperbolic Two Pressure Two-Fluid Model [Volume 46, Issue 1, 2014, Pages 67-77]
  • Ansari, Mohammad Reza Two-dimensional numerical simulation of shock-bubble interaction in compressible two-phase flows [Volume 45, Issue 1, 2013, Pages 1-13]
  • Ansari, Mohammad Reza An Experimental Investigation on the Effect of Vertical Distance and Inclination Angle of S-Shaped Channel on Two-Phase Flow Patterns [Volume 44, Issue 1, 2012, Pages 1-10]
  • Ansari, Reza e Limit Forming on Density Dislocation of Effect T [Volume 52, Issue 10, 2021, Pages 2709-2724]
  • Ansari, Reza Free Vibrations of Embedded Functionally Graded Graphene Platelets Reinforced Porous Nanocomposite Plates with Various Shapes Using P-Ritz Method [Volume 54, Issue 2, 2022, Pages 391-414]
  • Ansari-asl, Abbas An Experimental Investigation on Tensile and Impact Properties of Bagasse/Polypropylene Natural Composite [Volume 52, Issue 8, 2020, Pages 2149-2160]
  • Ansari Sadrabadi, Saeid Behavior Of FGM Spherical Vessels Under Internal Pressure and Temperature Difference [Volume 47, Issue 2, 2016, Pages 45-52]
  • Arab, Farnood Pattern Recognition of Unbalanced Rigid Rotor Bearing Forces [Volume 54, Issue 6, 2022, Pages 1249-1270]
  • Arab, Reza Free and Forced Vibration Analysis of Stiffened Cylindrical Shells under Moving Internal Pressure [Volume 53, Issue 12, 2022, Pages 5867-5886]
  • Arabi, Hamid Numerical and Experimental Investigation of Lubricant Effect in an Isothermal Precision Forging Process of a Titanium Blade Using Open Die Compression of Cylindrical Rod Test [Volume 51, Issue 5, 2019, Pages 1089-1096]
  • Arab maleki, vahid Passive Vibration Control of the Fluid Conveying Pipes using Dynamic Vibration Absorber [Volume 51, Issue 3, 2019, Pages 111-120]
  • Arab Maleki, vahid Piezoelectric Energy Harvesting Using a Porous Beam Under Fluid-Induced Vibrations [Volume 53, Issue 8, 2021, Pages 4633-4648]
  • Araee, A. Shunting Effect in Resistance Spot Welded Joints of Aluminum Alloys [Volume 50, Issue 3, 2018, Pages 561-576]
  • Araghchi, Masoud Effect of Graphene Sheets Aggregation on The Dislocation-Blocking Mechanism of Nanolaminated Aluminum/Graphene Composite: Molecular Dynamics Simulation Study [Volume 53, Issue 8, 2021, Pages 4649-4664]
  • Aramesh, Arash Thermodynamic and Thermo-Economic Analysis of the Absorption Heat Transformer, Organic Rankine Cycle, and Reverse Osmosis Desalination Combined System [Volume 53, Issue 1 (Special Issue), 2021, Pages 639-654]
  • Arbabi, Ali Experimental Study and Economic Evaluation of a Cascade Solar Water Desalination Unit in Various Conditions [Volume 52, Issue 6, 2020, Pages 1513-1530]
  • Ardakani, Mohammad Ali Experimental Investigation on Flow Downstream of a Triangular Bluff Body at Different Angles [Volume 53, Issue 1 (Special Issue), 2021, Pages 427-436]
  • Ardekani, Ehsan Experimental Investigation on Flow Downstream of a Triangular Bluff Body at Different Angles [Volume 53, Issue 1 (Special Issue), 2021, Pages 427-436]
  • Ardeshiri, Arash Numerical Study of Natural Convection of Al2O3-Water Nanofluid with Variable Properties in a Cavity [Volume 45, Issue 1, 2013, Pages 39-49]
  • Arefi, Mohammad mahdi Identification of LiBr-Water Solution Thermodynamic Properties using the ANN Technique [Volume 42, Issue 2, 2011, Pages 37-45]
  • Arefian, Amir Numerical Investigation of a Pulse-Jet Filter Cleaning System Performance [Volume 51, Issue 6, 2020, Pages 1455-1468]
  • Arefmanesh, Ali Experimental Study of Fluid Flow and Heat Transfer of Al2 O3 -Water Nanofluid in Helically Coiled Micro-Finned Tubes [Volume 52, Issue 2, 2020, Pages 509-524]
  • Arefmanesh, Ali Analysis of the Heat Transfer in a Multilayer Living Tissue Using the Galerkin Weighted Residuals Method [Volume 52, Issue 9, 2020, Pages 2609-2626]
  • Aref Mansh, Ali Numerical Study of Natural Convection of Al2O3-Water Nanofluid with Variable Properties in a Cavity [Volume 45, Issue 1, 2013, Pages 39-49]
  • Arghand, Hesam Addin Prognostics of rolling element bearings using shock pulse method and vibration method records and employing feedforward neural-network [Volume 53, Issue 4 (Special Issue), 2021, Pages 2557-2576]
  • Arghavani, Jamal Simulation and optimization of shape memory alloy cables [Volume 51, Issue 3, 2019, Pages 71-80]
  • Arhami, Mohammad Dynamic Analysis of Micro -Scale Parallelogram Flexures Using Beam Constraint Model and Modified Strain Gradient Theory [Volume 54, Issue 4, 2022, Pages 821-842]
  • Ariaei, A. Repair of Free Vibration Behavior of a Cracked Rotating Timoshenko Beam Using a Piezoelectric Patch and Applying Differential Transform Method [Volume 51, Issue 1, 2019, Pages 97-108]
  • Arianfard, Milad Clutch Position Control for an Automated Manual Transmission Using Electromechanical Actuators [Volume 54, Issue 4, 2022, Pages 769-790]
  • Arsalani, Moosa Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2022, Pages 5627-5644]
  • Arvin, Hadi Control of a Piezoelectric Nano-Actuator based on Flexoelectric Size-Dependent Theory [Volume 52, Issue 1, 2020, Pages 109-126]
  • Arvin, Hadi Nonlinear Flapping-Torsional Free Vibration Analysis of Rotating Beams Considering the Coriolis Force [Volume 52, Issue 12, 2021, Pages 3445-3462]
  • Arvin Boroujeni, H. Stability of a Blade with Varying Rotation Speed by Considering the Lagging Motion [Volume 51, Issue 1, 2019, Pages 147-156]
  • Aryanpour, M. Investigation of Torsional Static Behavior of Nano-rods Embedded in Elastic Medium Considering Surface Energy Effect [Volume 50, Issue 5, 2019, Pages 961-972]
  • Asadi, A. Performance Optimization of Multi-Effect Distillation-Thermal Vapor Compression Desalination Using Genetic Algorithm [Volume 50, Issue 2, 2018, Pages 399-412]
  • Asadi, Abbas Variable distance interdigitated electrodes design to improve the performance of cantilever piezoelectric thin films nanogenerators [Volume 53, Issue 4, 2021, Pages 2347-2366]
  • Asadi, Ali Experimental Study of the Effect of Fluid Jet Swirl on Circular Hydraulic Jump [Volume 53, Issue 7, 2021, Pages 4153-4170]
  • Asadi, Mahdi Analysis of an Auxiliary Household Underfloor Heating and Domestic Hot Water System Using Solar Energy in a Cold Area [Volume 54, Issue 5, 2022, Pages 1081-1100]
  • Asadi, Morteza On the Behavior of Carbon and Kevlar Fibers in Cylindrical Composites Subjected to Low-velocity Impact: Experimental Observation and Numerical Analysis [Volume 51, Issue 5, 2019, Pages 1025-1040]
  • Asadi Gilakejani, Hassan Failure Analysis of Glass Fiber Reinforced Plastic Pipes and Crack Inlet Opening with J-Integral Criteria Under Internal Pressure [Volume 52, Issue 5, 2020, Pages 1179-1192]
  • Asadigorgi, Hasan Using nonlinear energy sink to improve the dynamic behavior of rectangular plate under supersonic aerodynamic flow at different angles [Volume 53, Issue 6, 2021, Pages 3511-3528]
  • Asadi-pour, Mohsen The Effect of Small Scale on Torsional Buckling of the Embedded Double- to Five- Walled Nanotubes Under Axial Loading and Thermal Field [Volume 46, Issue 2, 2015, Pages 67-79]
  • Asari, M.R. Thermal Analysis for Diesel Engine Exhaust Manifold with Regard to the Boiling Phenomenon and Compared with Experimental Results [Volume 50, Issue 4, 2018, Pages 711-726]
  • Asefi, Amin Numerical Investigation of the Influence of Burner’s Bluff Body on Air-Fuel Mixing and Reaction [Volume 53, Issue 9, 2021, Pages 4981-4998]
  • Asemani, Seyedeh Samaneh Comparison of penetration process of 2-layer elastomeric composite with thermoset composite using energy absorption equations [Volume 53, Issue 6, 2021, Pages 3657-3672]
  • Asemani, S.Samaneh Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • ASEMPOUR, AHMAD Determination Of Forming Limit Diageram Using Two Modified Finit Element Models [Volume 48, Issue 4, 2017, Pages 379-388]
  • Asgari, M. Brain Trauma in Vehicle Side Crash; Developing a Computational Model for Diffuse Axonal and Subdural Hematoma Injuries [Volume 50, Issue 1, 2018, Pages 91-102]
  • Asgari, Masood Developing a Bidirectional Evolutionary Topology Algorithm for Continuum Structures with the Objective Functions of Stiffness and Fundamental Frequency with Geometrical Symmetry Constraint [Volume 52, Issue 1, 2020, Pages 249-264]
  • Asgari, Masood A new method for estimating the compressive strain of cellular structures using microstructure of foams based on Laguerre tessellations [Volume 53, Issue 6, 2021, Pages 3629-3644]
  • Asgari, Masood Numerical and Experimental Study Of Energy Absorption of Multi-Layer Aluminum-Composite Conical Frustum Structures under Axial Loading [Volume 54, Issue 8, 2022, Pages 1851-1866]
  • Asgari, Masood Developing an Analytical Model for Viscoelastic Anisotropic Dielectric Elastomer and Investigating the Rate Dependent Electromechanical Behavior [Volume 54, Issue 12, 2023, Pages 2781-2800]
  • Asgari, Masood Developing a new functionally graded lattice structure based on an elliptic unit cell for additive manufacturing and investigation of its properties [Volume 55, Issue 4, 2023, Pages 475-494]
  • Asgari, Mojtaba Ultrasonic Guided Wave-Based Inspection of Straight Seam Welded Pipes [Volume 52, Issue 10, 2021, Pages 2647-2660]
  • Asgari, Nima Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
  • Asgary, Masoud Effect of Graphene Sheets Aggregation on The Dislocation-Blocking Mechanism of Nanolaminated Aluminum/Graphene Composite: Molecular Dynamics Simulation Study [Volume 53, Issue 8, 2021, Pages 4649-4664]
  • Asghari, M. Finite Element Analysis of Vibration Behavior of Micro-Rotors Utilizing a Developed Strain Gradient-Based Beam Element [Volume 50, Issue 1, 2018, Pages 113-124]
  • Asghari, Saeed Experimental Cathode-Anode Flooding Diagnosis of Polymer-Electrolyte Fuel Cell of Power under 300W Using Adaptive-Neuro-Fuzzy Method [Volume 54, Issue 3, 2022, Pages 615-628]
  • Asgharzadeh, Alireza Measurement of subcooled flow boiling heat transfer coefficient in vertical annulus tube [Volume 53, Issue 7, 2021, Pages 4345-4360]
  • A. Shirazi, Farzad Control of a Quadrotor Equipped with Robotic Arm Based on Disturbance Estimation [Volume 54, Issue 4, 2022, Pages 747-768]
  • Ashouri, A. Numerical Study on the Vortex-induced Vibration of Circular Cylinder [Volume 51, Issue 2, 2019, Pages 455-470]
  • Ashraf, S.R A C1 Finite Element Formulation for Mindlin-Reissner Microplate Model [Volume 51, Issue 1, 2019, Pages 3-18]
  • Ashrafi Khorasani, Nariman Stability analysis of shear-thinning flow in narrow gap Taylor–Couette axial flow [Volume 53, Issue 3 (Special Issue), 2021, Pages 1745-1766]
  • Ashrafi Khorasani, Nariman Study of Nonlinear Vibration Behavior of an Electric Current-Carrying Ferromagnetic Plate in Magnetic Field [Volume 54, Issue 6, 2022, Pages 1303-1318]
  • Ashrafizaadeh, M. Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
  • Askari, Amir Reza Investigating the Influence of Higher-Order Boundary Conditions on Free Vibrations of Bi-Directional Functionally Graded Thick Conical Micro-Shells [Volume 53, Issue 10, 2022, Pages 5085-5104]
  • Askari, Amir Reza Investigating Bi-Stability of Pressurized Piezoelectric Micro-Plates Based on the Modified Couple Stress Theory [Volume 54, Issue 2, 2022, Pages 357-376]
  • Askarifard Jahromi, Hamid Raza Numerical simulation of mixed convection of Bingham fluid between two coaxial cylinders [Volume 53, Issue 5 (Special Issue), 2021, Pages 3417-3428]
  • Askari Lahdarboni, A. A Power-law Preconditioning Approach for Accelerating the Convergence Rate of Steady and Unsteady Incompressible Turbulent Flows [Volume 51, Issue 2, 2019, Pages 437-454]
  • A.S. Mirzabozorg, Mohsen Investigation of Geometric Characteristics on the Non-Reaction Supersonic Flow inside the Channel with the Presence of Cavities [Volume 53, Issue 11, 2022, Pages 5409-5428]
  • Assaee, H. Experimental Study of Energy Absorption of Square Column under Multi-Indentation Loading [Volume 51, Issue 1, 2019, Pages 33-42]
  • Assari, M. R. Experimental Investigation of Using Phase Change Materials in Heating System of a Solar Greenhouse [Volume 50, Issue 2, 2018, Pages 327-336]
  • Assari, M. R. Experimental Study of Charge of Paraffin Wax Along with Nanoparticles in an Eccentric Double Tube Heat Exchanger for Storing Energy in a Solar Water Heater [Volume 50, Issue 6, 2019, Pages 1403-1410]
  • Atabakhshian, V. Stability Analyses and Dynamic Response of Fluid Conveyed Thin-Walled Piezoelectric Cylinder Under Harmonic Excitation [Volume 50, Issue 1, 2018, Pages 151-162]
  • Atabi, Farideh Investigating the Performance of a Hybrid Desiccant Cooling System and Trombe Wall and Optimizing Wall Area in a Stable Condition [Volume 52, Issue 11, 2021, Pages 3289-3306]
  • Atashkari, K. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
  • Atoof, Hosein Experimental Study of Flame Stability in SiC Porous Media [Volume 43, Issue 1, 2012, Pages 59-70]
  • Ayat, Amir Analyzing driving behavior based on vehicle information logging using MPU6050 [Volume 53, Issue 6 (Special Issue), 2021, Pages 3855-3874]
  • Ayatollahi, Majid Reza Experimental and Theoretical Assessment of Mode II Fracture Toughness for Cracked Ductile Specimens with High Strain-Hardening [Volume 53, Issue 10, 2022, Pages 5141-5158]
  • Ayatollahi, M.R. Brittle Fracture in Key-hole Notched Polymer Specimens under Combined Compressive-shear Loading [Volume 50, Issue 5, 2019, Pages 927-942]
  • Ayoobi, Ahmadreza Experimental Investigation of the Performance of Trailing Edge Noise-Reducing Finlets [Volume 53, Issue 9, 2021, Pages 4827-4846]
  • Azad, E. Experimental Study of Freeing Stuck Pipe by Changing in Characterization and Additives of Mud Cake [Volume 50, Issue 4, 2018, Pages 863-872]
  • Azadi, Mohammad Nonlinear Transient Thermoelastic Analysis of a Thick FGM Cylinder with Temperature-Dependent Material Properties Using the Finite Element Method [Volume 42, Issue 1, 2011, Pages 9-18]
  • Azadi, Mohammad Active Flutter Control of a Swept Wing with an Engine by using Piezoelectric Actuators [Volume 51, Issue 3, 2019, Pages 161-170]
  • Azadi, Mohammad Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]
  • Azadi, Mohammad Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]
  • Azadi, Mohammad Study of Fretting Fatigue Behavior of Cylinder head Aluminum Alloy, with and without nano-Clay-Particles [Volume 54, Issue 4, 2022, Pages 885-904]
  • Azadi, Mohammad Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis [Volume 54, Issue 8, 2022, Pages 1867-1894]
  • Azadi, mohsen An Experimental Investigation on the Effect of Vertical Distance and Inclination Angle of S-Shaped Channel on Two-Phase Flow Patterns [Volume 44, Issue 1, 2012, Pages 1-10]
  • Azadi, Shahram Combination of active braking and semi-active suspension systems to improve the roll and yaw vehicle stability [Volume 53, Issue 6, 2021, Pages 3549-3570]
  • Azadi, Shahram Head-on Collision Avoidance Path Planning with Model Predictive Control [Volume 54, Issue 8, 2022, Pages 1737-1760]
  • Azadi, Sharam A Vehicle Control Algorithm For Stop-and-Go Cruise Control System [Volume 44, Issue 2, 2013, Pages 83-91]
  • Azadi Talab, Vahid Modeling of turbulent atmospheric boundary layer and dispersion of solid pollutant particles in an urban area using large eddy simulation [Volume 53, Issue 5, 2021, Pages 2839-2856]
  • Azadvari, Mohaddeseh Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Azami, Behnam Transient numerical modeling and experimental investigation of the effect of surface texture on elastohydrodynamic lubrication [Volume 53, Issue 5 (Special Issue), 2021, Pages 3201-3212]
  • Azamirad, Ghasem Study and Optimization of Effective Parameters in The Occurrence of Blush Defect in The Plastic Injection Molding Process by Analysis of Variance [Volume 53, Issue 10, 2022, Pages 5293-5308]
  • Azarafza, Reza Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Azari, Ahmad An Experimental Investigation of Convective Heat Transfer of Slurry Phase Change Material in a Tube with Butterfly Tube Inserts [Volume 52, Issue 6, 2020, Pages 1561-1576]
  • Azarkish, Hassan Design and Multi-Objective Optimization of A Magnetohydrodynamic Drug Delivery Infusion Micropump [Volume 53, Issue 10, 2022, Pages 5221-5238]
  • Azarniya, Amir Hosein Effects Of SMA Wires Free Vibration Of Shape Memory Sandwich Panel [Volume 44, Issue 2, 2013, Pages 29-40]
  • Azghani, Mahmoud Reza onceptual Design of an Apparatus for Tri-axial Measurement of Lumbar Torques in Isometric Mode [Volume 42, Issue 1, 2011, Pages 45-53]
  • Azhdari, Mehrdad Numerical Investigation of Flow Field around a Mannequin Model with Airway System in an Air Conditioned Room [Volume 52, Issue 4, 2020, Pages 955-970]
  • Azhdary Moghaddam, Mahdi Investigation on flow air concentration effect on distance of the chute spillway aerators [Volume 53, Issue 5 (Special Issue), 2021, Pages 3135-3150]
  • Azimi, A. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
  • Azimi, A. Numerical Simulation of Transient Compressible Flow in Natural Gas long Transmission Pipelines Using a Suitable Parallel Algorithm [Volume 50, Issue 4, 2018, Pages 785-798]
  • Azimi, Aziz An Air Zonal Model for Predicting Air Flow, Temperature Distribution and Humidity Distribution in Buildings [Volume 47, Issue 1, 2015, Pages 47-57]
  • Azimi, S. Mohammad Hosein Active Flutter Control of a Swept Wing with an Engine by using Piezoelectric Actuators [Volume 51, Issue 3, 2019, Pages 161-170]
  • Azimifar, A. Minimization of Rate of Heat Transfer from Rectangular Cavities with Free Convection in Various Aspect Ratios for Finding Characteristics of an Array of Adiabatic Thin Fins by PSO Algorithm [Volume 50, Issue 2, 2018, Pages 295-308]
  • Azimifar, M. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
  • Azizi, A. Bending and Free Vibration Analysis of Functionally Graded Nano-plate Using Trigonometric Higher-Order Plate Theory [Volume 50, Issue 5, 2019, Pages 1039-1050]
  • Azizi, Alireza An Empirical Study on Dropwise Condensation Occurred on Surfaces Hydrophobized Using a Single-Step Electrodeposition [Volume 52, Issue 6, 2020, Pages 1397-1412]
  • Azizi, Saeed Effect of Air Curtain on Occupants Thermal Comfort and Indoor Air Quality in an Athletic Swimming Pool with Spectators’ Stand [Volume 53, Issue 1, 2021, Pages 191-208]
  • Azizi Sormoli, Hossein Numerical Study of Microbubble Dynamics Subjected to Ultrasound and Its Effect on Thermal Ablation of Biological Tissue [Volume 54, Issue 11, 2023, Pages 2561-2582]
  • Azizi Tafti, Rohollah Using Artificial Neural Networks for Estimationof Springback in Cold Roll Forming [Volume 42, Issue 3, 2011, Pages 29-37]
  • Azizi Tafti, Roohollah An investigation on bend curve in the transition zone on web warping of channels with variable width in the flexible roll forming process [Volume 48, Issue 4, 2017, Pages 423-434]
  • Azizzadeh, Turaj Study on the Influence of Spacing of the Nearby Corrosion Defects on Magnetic Flux Leakage Signals [Volume 52, Issue 3, 2020, Pages 619-634]
  • Azmi, Reza Designing an Optimal Non-Linear Controller for an Active Vehicle Suspension System and Investigating its Effect on Electrical Energy Harvesting [Volume 54, Issue 12, 2023, Pages 2741-2762]

B

  • Bab, Saeed Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2022, Pages 5851-5866]
  • Babaei, Hashem Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • Babaei, Hashem Effect of intense impulsive loading on performance of multi-layered plates [Volume 53, Issue 4 (Special Issue), 2021, Pages 2639-2670]
  • Babaei, Hashem Investigation of penetration behavior of monolithic and multi-layered metallic targets subjected to a projectile impact [Volume 53, Issue 4, 2021, Pages 2309-2330]
  • Babaei, Hashem Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 4023-4050]
  • Babaei, Hosein Experimental Investigation of Heat Transfer Enhancement by Acoustic Streaming in a Closed Cylindrical Enclosure [Volume 44, Issue 1, 2012, Pages 11-20]
  • Babaei Dooki, Maryam Numerical Simulation of Aero-Acoustic Noise from Supersonic Jet Reflection Using Computational Fluid Dynamics/Boundary Element Method [Volume 54, Issue 9, 2022, Pages 2061-2084]
  • Babakhani, Ali Investigation of Flow in Microchannels with Superhydrophobic Surfaces Using Hybrid Direct Simulation Monte Carlo-Navier-Stokes Method with Information Preservation Approach [Volume 52, Issue 7, 2020, Pages 1741-1756]
  • Babakhani, H. Comparison of the Hemodynamic Parameters of Sequential Parallel and Cross Configurations of Coronary Artery in the Rest State [Volume 51, Issue 2, 2019, Pages 497-506]
  • Babazadeh Baie, N. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
  • Babazadeh Shayan, Soheil Effect of Fuel Additives on Gasoline Volatility [Volume 46, Issue 1, 2014, Pages 57-65]
  • Badri Ghavifekr, Habib Design and simulation of a biosensor based on a microelectromechanical resonator array [Volume 53, Issue 6 (Special Issue), 2021, Pages 3841-3854]
  • Bafekr, Sajed Hadi The Effect of Non-Newtonian Behavior on the Transport of Low Density Lipoprotein Particles in the Vortex Region in the Human Carotid Artery [Volume 53, Issue 9, 2021, Pages 4789-4806]
  • Baghani, Mostafa Investigation of Viscoelastic-Viscoplastic-Viscodamage Behavior of Polymers under Cyclic Loadings and Parametric Study of Their Mechanical Behavior [Volume 51, Issue 5, 2019, Pages 967-980]
  • Baghani, Mostafa Investigation of Fatigue Crack Growth in Superelastic NiTi Alloy by Using Digital Image Correlation Method [Volume 52, Issue 5, 2020, Pages 1167-1178]
  • Baghani, Mostafa Mechanical Behavior of Temperature-Sensitive Hydrogel Considering Functionally Graded Characteristics [Volume 52, Issue 12, 2021, Pages 3583-3594]
  • Baghani, Mostafa Finite Element Modeling of a Novel Magnetic Shape Memory Alloy Based Energy Harvester Using a Corrugated Beam and Investigating the Effective Parameters [Volume 53, Issue 2, 2021, Pages 799-814]
  • Baghani, Mostafa Finite element modeling of shape memory alloy stent insertion in the vessel with consideration of vessel damage [Volume 53, Issue 2 (Special Issue), 2021, Pages 1211-1222]
  • Bagheri, Ahmad Transient Response of Annular Sandwich Plate with Functional Graded Core Combined with Piezoelectric Layers [Volume 52, Issue 12, 2021, Pages 3485-3502]
  • Bagheri, Ahmad Denoising vibration signals of rotating machines using probability density function, similarity measure and improved thresholding function [Volume 53, Issue 4 (Special Issue), 2021, Pages 2493-2512]
  • Bagherian Dehaghi, Mahdi Experimental investigation on the geometrical characterization of the cone-jet mode of electrospray of ethanol-water mixtures with different concentrations by high-speed imaging [Volume 55, Issue 5, 2023, Pages 617-642]
  • Bagheri Ardakani, A. Numerical Analysis and Optimization of Magnetic Flux Density in the Polishing Process with Magnetorheological Fluid [Volume 50, Issue 3, 2018, Pages 577-588]
  • Bagheri-Esfeh, Hamed Comparison of natural and synthetic carotid arteries in the normal and occluded cases considering the effect of blood on elastic wall of artery [Volume 53, Issue 5, 2021, Pages 2821-2838]
  • Bahaadini, Reza Nonlinear Vibrations of Graphene Reinforced Pipes Conveying Fluid [Volume 53, Issue 8, 2021, Pages 4483-4500]
  • Bahaadini, Reza Vibration and Stability Analysis of Micro-pipes Conveying Fluid under Magnetic, Electric, and Thermal Fields [Volume 54, Issue 8, 2022, Pages 1803-1832]
  • Baharvandi, Hamidreza Study of fracture toughness in B4C-TiB2 Nanocomposites with Vickers indentation test method at different loads [Volume 46, Issue 2, 2015, Pages 57-65]
  • Baheri Islami, Sima Experimental Study of Hydrodynamic Behavior and Breakup of Liquid Jet with/ without the Electric Field [Volume 51, Issue 6, 2020, Pages 1487-1498]
  • Baheri Islami, Sima Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Baheri Islami, Sima Experimental study on the enhancement of the thermal efficiency of a household gas water heater [Volume 53, Issue 3 (Special Issue), 2021, Pages 2013-2030]
  • Baheri Islami, Sima Numerical Study on the Enhancement of the Thermal Efficiency of a Household Gas Water Heater and Verification with Experimental Results [Volume 54, Issue 5, 2022, Pages 1199-1220]
  • Bahmani, Ehsan One-dimensional Combustion Simulation for Different Hydrogen-enriched Natural Gas Blends [Volume 53, Issue 1, 2021, Pages 53-64]
  • Bahoosh Kazerooni, Reza Investigation of Heat Transfer of Non-Newtonian Pseudo-Plastic Fluids in Porous Heat Exchangers [Volume 53, Issue 1, 2021, Pages 241-258]
  • Bahrainian, Seyed Saied Numerical Modeling of the Effect of Inlet Temperature and Pressure on Steam Condensation and Entropy Generation in High-Pressure Separator [Volume 54, Issue 11, 2023, Pages 2601-2620]
  • Bahrami, Farzad A Heuristic for Scheduling Payments in project: Two Different Approaches for Contractor and Client [Volume 42, Issue 3, 2011, Pages 73-85]
  • Bahrami, Hassan Using the Propeller Pre-Swirl Stator to Reduce Underwater Vehicle Roll Motion and Increase Propeller Efficiency [Volume 55, Issue 1, 2023, Pages 123-142]
  • Bahrami, Hassan Numerical Analysis of Pre-Swirl Stators for Ship Propeller [Volume 54, Issue 11, 2023, Pages 2459-2478]
  • Bahrami, Mohammad Amin A study on the synergistic influence of reduced graphene oxide and MWCNTs on the mechanical properties of epoxy nanocomposite [Volume 53, Issue 6 (Special Issue), 2021, Pages 3971-3986]
  • Bahrami, S. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
  • Bahrami, Sajjad TI Magnetophoretic Capacitors for Storing Particles and Cells in a Tri-Axial Magnetic Field [Volume 55, Issue 5, 2023, Pages 643-658]
  • Bahrami ghale Sefidi, Mehdi Stress Analysis of Closed Multi Cell Sections under Torsion [Volume 42, Issue 1, 2011, Pages 29-37]
  • Bahrami Joo, Behzad Designing Optimum Multi-Domain System by Integrating Bond Graph and Genetic Programming [Volume 53, Issue 2, 2021, Pages 1015-1038]
  • Bahramkhoo, Moharram Investigating the Performance of a Hybrid Desiccant Cooling System and Trombe Wall and Optimizing Wall Area in a Stable Condition [Volume 52, Issue 11, 2021, Pages 3289-3306]
  • Bajalan, Sima Simulation of Two-Phase Flow and Heat Transfer in a Channel and around a Tube by Lattice-Boltzmann Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 499-516]
  • Bakhsheshy, A. Free Vibration Analysis of Two-Dimensional Functionally Graded Annular Sector Plates with Piezoelectric Layers Resting on Two-Parameter Elastic Foundation [Volume 51, Issue 1, 2019, Pages 109-118]
  • Bakhsheshy, Ali The effect of accuracy of the length scale parameter on natural frequencies of porous rectangular microplate [Volume 53, Issue 2 (Special Issue), 2021, Pages 1179-1196]
  • Bakhshi, M. Numerical and Experimental Investigation of Effective Parameters on Formability of Al-St Two Layer Sheet Metals [Volume 50, Issue 3, 2018, Pages 517-528]
  • Bakhshi, M. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
  • Bakhshi, M. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
  • Bakhshi, Mohammad REFORMING INTERNAL PRESSURE AND AXIAL FEEDING LOADING PATHS IN HYDROFORMING PROCESS OF CYLINDRICAL STEPPED TUBE IN ORDER TO IMPROVE THE THICKNESS DISTRIBUTION [Volume 48, Issue 4, 2017, Pages 389-400]
  • Bakhshian Nik, Amirala The Effect of Bone Tissue Engineering Scaffold Architecture on Mechanical Modulation of Cell Layer Behavior [Volume 51, Issue 3, 2019, Pages 11-20]
  • Bakhtiari, M. Investigation of Step Sweep-Forward Angle Effects on the Hydrodynamic Performance of a Planing hull [Volume 50, Issue 4, 2018, Pages 903-912]
  • Bakhtiari HaftLang, Pedram Numerical modeling of rock cutting with abrasive water jet in order to determine the optimal range of parameters affecting the depth and volume of cutting [Volume 55, Issue 8, 2023, Pages 971-994]
  • Bakhtiari-Nejad, Firooz Nonlinear Electro-aero-elastic Vibration Analysis of a Nanocomposite Laminated Trapezoidal Actuator [Volume 53, Issue 2 (Special Issue), 2021, Pages 1137-1158]
  • Bak Khoshnevis, A. Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
  • Bak Khoshnevis, A. Experimental Study of Fluctuation, Parameters and High-Order values of velocity in wake Region of a Model car [Volume 49, Issue 1, 2017, Pages 83-92]
  • Baniasad Askari, Ighball Thermodynamic and Thermo-Economic Analysis of the Absorption Heat Transformer, Organic Rankine Cycle, and Reverse Osmosis Desalination Combined System [Volume 53, Issue 1 (Special Issue), 2021, Pages 639-654]
  • Baniasadi, Ehasn Energy and Exergy Analyses of the Performance of a Spark Ignition Engine Using Two-Zone Combustion Model [Volume 51, Issue 4, 2019, Pages 61-70]
  • Bani mohmmad Ali, Amir Investigation of Failure Mechanism of the Composite Tubes Made by Filament Winding Process by Acoustic Emission Method [Volume 54, Issue 6, 2022, Pages 1357-1372]
  • Bannazadeh, R. Failure Analysis of a Gas Turbine Blade Made of Inconel 738LC Super Alloy [Volume 50, Issue 1, 2018, Pages 103-112]
  • Bannazadeh, R. Experimental Study of Cryogenic Cooling Effect on Tool Wear and Power Consumption During Turning of AISI304 [Volume 50, Issue 3, 2018, Pages 641-657]
  • Baradaran, Farzaneh Stress and Vibrational Analysis of Non-Pneumatic Tire and Study the Effect of the Spoke Curvature and Velocity on the Wheel Vibration Using Finite Element Method [Volume 52, Issue 8, 2020, Pages 2213-2230]
  • Barati, Amir Hossein Fault detection and isolation based on robust Kalman filter for discrete-time systems with stochastic and norm-bounded uncertainties [Volume 53, Issue 6 (Special Issue), 2021, Pages 3825-3840]
  • Barati, Ebrahim Numerical Study on the Effect of Blower Location on the Maximum Temperature and Spread of Smoke In Case Of Fire inside Tunnels [Volume 52, Issue 11, 2021, Pages 3241-3256]
  • Barati, Ebrahim Numerical simulation simultaneous use of longitudinal ventilation and smoke extraction from the ceiling in fires inside tunnels [Volume 53, Issue 7, 2021, Pages 4411-4428]
  • Barazandeh, Farshad Design Enhancement of Mobile Snake Robots Based on Snake Anatomy [Volume 42, Issue 3, 2011, Pages 9-20]
  • Barghandan, Mostafa A Practical Method for Controlling the Parallel Robot Path Based on the Sliding Mode Method with Fuzzy Adjustable Coefficients [Volume 55, Issue 2, 2023, Pages 257-282]
  • Bari, Iman Impact Stress Analysis for the Welding Joint in a Rotary Dryer [Volume 54, Issue 12, 2023, Pages 2843-2860]
  • Barimani Varandi, Abozar Feasibility study of single point incremental forming of aircraft canopy for polycarbonate sheet [Volume 53, Issue 4 (Special Issue), 2021, Pages 2751-2768]
  • Barimani-Varandi, Abozar Electroplastic friction stir spot welding for joining AA6061-T6 aluminum to galvanized DP590 steel [Volume 53, Issue 6, 2021, Pages 3733-3750]
  • Barzanooni, V. Experimental Study of Drag Reduction on a Model Car Using an Active Flow Control [Volume 49, Issue 3, 2017, Pages 435-444]
  • Barzanooni, V. Experimental Study of Fluctuation, Parameters and High-Order values of velocity in wake Region of a Model car [Volume 49, Issue 1, 2017, Pages 83-92]
  • Barzegari, M. Experimental Investigation and Numerical Simulation of the Pressure Force on the Formation of Metallic Bipolar Plate in the Stamping Process [Volume 50, Issue 3, 2018, Pages 505-516]
  • Barzegari, Mohammad Mahdi Numerical and Experimental Modal Analysis of a 400 W Polymer Electrolyte Membrane Fuel Cell [Volume 53, Issue 1, 2021, Pages 101-116]
  • Barzegari, Mohammad Mahdi A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Barzegari, Mohammad Mahdi Experimental and numerical investigation of the plastic deformation of metallic bipolar plates with serpentine flow filed [Volume 53, Issue 6, 2021, Pages 3717-3732]
  • Barzegari, Mohammad Mahdi Dynamic Modeling and Parameter Identification of Hydrogen-Oxygen PEM Fuel Cell Model with Integrated Humidifier [Volume 55, Issue 3, 2023, Pages 359-380]
  • Barzegari, Mohammad Mahdi Numerical Investigation of Bending Strength of Composite Sandwich Panel with Grid Core for Use in PEM Fuel Cell Endplates [Volume 55, Issue 6, 2023, Pages 723-736]
  • Barzegari, Mohammad Mahdi Numerical and Empirical Investigation on Bending Behavior of Composite Bipolar Plates for PEM Fuel Cells [Volume 55, Issue 8, 2023, Pages 995-1008]
  • Barzegar-Mohammadi, sajjad Fatigue Life Estimation of In-Service Welded Patch Using Multiaxial Fatigue Criteria [Volume 54, Issue 12, 2023, Pages 2877-2898]
  • Barzgarnezhad, mohammad Experimental Study and Economic Evaluation of a Cascade Solar Water Desalination Unit in Various Conditions [Volume 52, Issue 6, 2020, Pages 1513-1530]
  • Baseri, Hamid Chatter Suppression in turning by applying a tooling mechanism with the ability to change the tool angles [Volume 55, Issue 4, 2023, Pages 461-474]
  • Bashirnezhad, kazem Experimental investigation on MWCNTs-COOH nano fluid on 3D oscillating heat pipe [Volume 53, Issue 5 (Special Issue), 2021, Pages 3401-3416]
  • Bashi Shahabi, Peyman Study of Effective Parameter on Distribution of EGR/Blowby Injection in the EF7 Intake Manifold [Volume 44, Issue 1, 2012, Pages 21-33]
  • Basirat Tabrizi, Hassan Modeling and Experimental study of force convection frost formation over a curved surface [Volume 51, Issue 4, 2019, Pages 151-160]
  • Basiri, Shahin Energy, Exergy and Thermoeconomic Analysis of the Novel Combined Cycle of Solid Oxide Fuel Cell and Biogas Steam Reforming for Cogeneration Power and Hydrogen [Volume 54, Issue 1, 2022, Pages 211-234]
  • Basirjafari, S. Increasing the Frequency Band of Sound Absorption for Flat Multi-Layered Absorbers Consisting of Porous Material, Perforated Panel and Air-Gap [Volume 50, Issue 1, 2018, Pages 219-230]
  • Ba Sohbat Novinzade, Ali Reza Design of Solid Rocket Booster based on Collaborative Design Theory [Volume 44, Issue 1, 2012, Pages 57-65]
  • Basti, Ali Theoretical Analysis of the Temperature and Strain Rate Effects on the Forming Limit Diagram of AA3104 [Volume 52, Issue 3, 2020, Pages 555-570]
  • Basti, Ali e Limit Forming on Density Dislocation of Effect T [Volume 52, Issue 10, 2021, Pages 2709-2724]
  • Basti, Ali Analysis of Forming Limit of Sheet Metals Considering Vertex Localized Necking and Ductile Damage Criterion [Volume 53, Issue 2 (Special Issue), 2021, Pages 1307-1320]
  • Basti, Ali Investigation on the Effect of Different Constitutive Models on the Forming Limit of the Sheet under Nonlinear Strain Path [Volume 54, Issue 4, 2022, Pages 925-944]
  • Basti, Ali Theoretical Analysis of the Effects of Hardening Laws, Normal and Through Thickness Shear Stresses on Forming Limit Curves of AA6016-T4 [Volume 54, Issue 6, 2022, Pages 1391-1408]
  • Bavarsad, Anna Nonlinear optimal control of an active transfemoral prosthesis using state dependent Riccati equation approach [Volume 53, Issue 4, 2021, Pages 2117-2136]
  • Bayani, H. Multiphase Simulation of Aluminum A356 Metal Foam Formation Process by Lattice Boltzmann Method [Volume 50, Issue 4, 2018, Pages 741-754]
  • Bayat Bodaghi, Tohid Numerical and Experimental Investigation of the Effect of Parameters in Shear Spinning Process of a Conic Sample [Volume 52, Issue 3, 2020, Pages 543-554]
  • Bazargan, M. Optimization of heat transfer and pressure drop in a solar air heater with ribbed surface [Volume 49, Issue 1, 2017, Pages 137-146]
  • Bazargan, M. Investigation of the Effect of Longitudinal Distance Between Two Cars on Fuel Consumption and Drag Coefficient [Volume 50, Issue 4, 2018, Pages 893-902]
  • Bazargan, Majid Simulation of diffusion absorption refrigeration cycle with car exhaust heat source and improving cycle performance at low engine speeds [Volume 52, Issue 6, 2020, Pages 1429-1442]
  • Bazargan, Majid Experimental investigation of heat transfer and pressure drop in perforated ribs in the solar air heater channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1981-2000]
  • Bazargan, Majid Numerical investigation of the effect of the porous coating layer on the heat transfer plate in the flow of impinging jet array [Volume 55, Issue 3, 2023, Pages 337-358]
  • Bazargan Harandi1, H. Performance Optimization of Multi-Effect Distillation-Thermal Vapor Compression Desalination Using Genetic Algorithm [Volume 50, Issue 2, 2018, Pages 399-412]
  • Bazargan lari, Yousef Control of the Amount of Oncolytic Virus Injection by Considering Time Delay [Volume 53, Issue 2 (Special Issue), 2021, Pages 1125-1136]
  • Bazargan lari, Yousef Large-Amplitude Frequency Analysis of Bi-directional Functionally Graded with Non-Uniform Porous Beams using a Higher Order Shear Deformation Theory [Volume 54, Issue 8, 2022, Pages 1761-1788]
  • Bazzazi, A Experimental Study of Foam Generation in a Microfluidic Device [Volume 52, Issue 7, 2020, Pages 1729-1740]
  • Bedram, Ahmad Analytical-Numerical Investigation of Unequal Sized Droplets of Dilatants' Fluid in T-Junction with Unequal Length Branches [Volume 53, Issue 3, 2021, Pages 1417-1438]
  • Behbahaninejad, M. Numerical and Experimental Study of Two-phase Flow in Downward vertical Pipe [Volume 51, Issue 2, 2019, Pages 413-426]
  • Behbahani-nejad, M. Numerical Simulation of Transient Compressible Flow in Natural Gas long Transmission Pipelines Using a Suitable Parallel Algorithm [Volume 50, Issue 4, 2018, Pages 785-798]
  • Beheshti Amiri, Hosein Numerical Modelling of Transonic Two Phase Flow with Shock in Converging-Diverging NozzleDiverging Nozzle [Volume 45, Issue 1, 2013, Pages 15-27]
  • Behmounesi, Seyed Amir Theoretical comparison of thermal and electrical performance of different models of sheet and tube type solar photovoltaic - thermal water collector [Volume 53, Issue 5, 2021, Pages 2903-2920]
  • Behnia, Mohsen Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing [Volume 52, Issue 4, 2020, Pages 797-812]
  • Behroozizade, E. Numerical Simulation of Tip Leakage Flow Structure in the Transonic Axial Compressor in Different Performance Conditions [Volume 51, Issue 2, 2019, Pages 471-482]
  • Behrouz, Hossein Chatter Suppression in turning by applying a tooling mechanism with the ability to change the tool angles [Volume 55, Issue 4, 2023, Pages 461-474]
  • Behyad, Reza An Artificial Neural Network Approach for Modeling and Prediction of Energy Consumption in a Seawater Greenhouse [Volume 52, Issue 2, 2020, Pages 437-452]
  • Behzad, Mehdi Prognostics of rolling element bearings using shock pulse method and vibration method records and employing feedforward neural-network [Volume 53, Issue 4 (Special Issue), 2021, Pages 2557-2576]
  • Behzadi, Bahman Vapor-Liquid-Liquid Equilibrium Calculation for Water and normal-Hexane binary mixture using Monte Carlo Molecular Simulation [Volume 48, Issue 3, 2016, Pages 239-246]
  • Behzadmehr, Amin Thermal Analysis of a Solar Wall Equipped to Nano Phase Change Material [Volume 51, Issue 4, 2019, Pages 131-140]
  • Beig Mohammadi, Mohammad Numerical and Experimental Investigation of Lubricant Effect in an Isothermal Precision Forging Process of a Titanium Blade Using Open Die Compression of Cylindrical Rod Test [Volume 51, Issue 5, 2019, Pages 1089-1096]
  • Beigpour, Reza Thermal Stress Analysis of the Carbon Nanotube Reinforced Composite Cylindrical Shells [Volume 53, Issue 10, 2022, Pages 5269-5292]
  • Beigpour, Reza Numerical and Experimental Investigation on Compressive Properties of Egg Box Cores in Biodegradable Sandwich Panels [Volume 54, Issue 4, 2022, Pages 843-858]
  • Beyranvand, M. A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2018, Pages 819-828]
  • Bidabadi, Mahdi Analytical model for the non-premixed combustion of the titanium dust cloud in counter-flow geometry [Volume 53, Issue 5 (Special Issue), 2021, Pages 3307-3316]
  • Bidabadi, Mehdi A New Mathematical Model for Cloud Flame Structure with Premixed Organic Particles [Volume 42, Issue 2, 2011, Pages 19-26]
  • Bidzard, A. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
  • Bigdeloo, Fatemeh Stabilization of Reduced Order Model for Convection-Diffusion Problems Based on Dynamic Mode Decomposition at High Reynolds Numbers Using Eddy Viscosity Approach [Volume 54, Issue 11, 2023, Pages 2479-2498]
  • Biglari, FaridReza Micromechanical Damage Model for Plasticity of ‎Metals to Predict Failure under Shear Loads [Volume 53, Issue 12, 2022, Pages 5679-5702]
  • Biglari, Hamed Edgewise Vibration Reduction of a Small-Scale Wind Turbine Blade with Considering Vibration Coupling [Volume 52, Issue 8, 2020, Pages 2261-2276]
  • Biglari, Hamed Employing of shunt damping method to reduce edgewise vibration of small size wind turbine blade with considering the effect of vibration coupling [Volume 53, Issue 4, 2021, Pages 2073-2088]
  • Biglari, Hasan Presenting the Traction-Separation Law for Ultrasonic Welding of Glass-Fiber Reinforced Polypropylene Composite [Volume 54, Issue 10, 2023, Pages 2429-2456]
  • Bijari, Hanieh A New Index for Evaluating Thermal Sensation Based on the Principles of Non- Fourier Heat Transfer [Volume 52, Issue 9, 2020, Pages 2597-2608]
  • Boomeri, Vahid Design, Modeling and Control of a Hybrid Climbing Robot in Manipulation Mode Using Feedback Linearization Control Method [Volume 52, Issue 1, 2020, Pages 57-84]
  • Bordbari, H. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
  • Borji, M. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
  • Borji, Mehdi Three-Dimensional Numerical Study of Solid Oxide Fuel Cell Performance with Converging Diverging Flow Field [Volume 54, Issue 3, 2022, Pages 589-614]
  • Boroomand, Bijan Exponential basis functions in solution of time –dependent heat equation in axially layered materials [Volume 46, Issue 1, 2014, Pages 37-46]
  • Bostani, Hadis An Experimental Investigation on the Convective Heat Transfer Coefficient and Nusselt Number in Water/Carbon Nanofluid [Volume 53, Issue 1, 2021, Pages 209-220]
  • Botshekanan Dehkordi, Mohsen Buckling investigation of cylindrical shell using size-dependent new super element [Volume 51, Issue 3, 2019, Pages 41-50]
  • Bozorg, M. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
  • Bozorgmehrian, Maryam An Experimental Investigation on the Convective Heat Transfer Coefficient and Nusselt Number in Water/Carbon Nanofluid [Volume 53, Issue 1, 2021, Pages 209-220]
  • Broghany, M. Increasing the Frequency Band of Sound Absorption for Flat Multi-Layered Absorbers Consisting of Porous Material, Perforated Panel and Air-Gap [Volume 50, Issue 1, 2018, Pages 219-230]
  • Bustan, Danyal Spacecraft Fault Tolerant Attitude Control Design under Control Input Saturation and Uncertainty in Fault Information [Volume 48, Issue 2, 2016, Pages 115-124]

C

  • Chahardowli, Mohammad Modeling of Drilling Cuttings Transport by Foam in Horizontal Well Condition Using Computational Fluid Dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 357-374]
  • Chaibakhsh, Ali Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
  • Chaibakhsh, Ali Investigating noise reduction in signal analysis in rotary machines fault diagnosing by neural network [Volume 55, Issue 12, 2024, Pages 2-2]
  • Chakherlou, T.N. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
  • Chakherlou, T.N. Comparison Between Composite Patches and Bolt Clamping Force to Repair an Edge Crack in Aluminum Alloy 2024-T3 Specimens [Volume 50, Issue 3, 2018, Pages 627-640]
  • Chakherlou Tajbakhsh, Navid Investigation of thermal cycle effect prior to cyclic loading on fatigue life of interference fitted specimens and fatigue life prediction [Volume 51, Issue 3, 2019, Pages 1-10]
  • Chalangaran, Navid Experimental Investigation into Sound transmission Loss through Concrete Containing Recycled Rubber [Volume 51, Issue 3, 2019, Pages 131-140]
  • Changizian, Maziar Numerical Modeling of the Effect of Inlet Temperature and Pressure on Steam Condensation and Entropy Generation in High-Pressure Separator [Volume 54, Issue 11, 2023, Pages 2601-2620]
  • Changizian, S. A Coupled Thermal Model for Refrigeration Cycle and Cabin of the First Produced Vehicle Based on the National Vehicle Platform [Volume 50, Issue 6, 2019, Pages 1159-1174]
  • Chehardoli, Hoseyn Robust Adaptive Backstepping Control of a Nonlinear System with Uncertainty, Disturbance and Unknown Time Delay [Volume 45, Issue 2, 2013, Pages 77-86]
  • Chehardoli, Hossein Control of heterogeneous traffic flows in presence of pocket loss, time-varying communication delay and actuator lag [Volume 53, Issue 4, 2021, Pages 2155-2170]
  • Cheloee Darabi, Ali Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Chenarani, Hamid Investigation of dust dispersion in urban environment using large eddy simulation method [Volume 55, Issue 11, 2024, Pages 2-2]
  • Cheraghi rizi, Emad Finite Element Simulation and Experimental Verification of HAZ Softening during Welding of Aluminum alloy 7075 [Volume 55, Issue 8, 2023, Pages 1009-1020]
  • Chidan, Adel Numerical Study of Natural Convection Heat Transfer inside a Triangular Cavity with Flexible Sidewalls Containing a Cylindrical Heat Source [Volume 53, Issue 11, 2022, Pages 5461-5484]
  • Chitsaz, Ata Parametric Analysis and Optimization of a Trigeneration System Based on the Tubular Solid Oxide Fuel Cell [Volume 52, Issue 2, 2020, Pages 399-418]
  • Chitsaz, Ata Exergoeconomic Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with External Reformer and Dimethyl Ether [Volume 52, Issue 6, 2020, Pages 1463-1478]
  • Choobdar Rahim, Farzad Investigation of Thermo-Hydraulic Parameters of Reactor Containment due to Cold-Leg Break Accident [Volume 53, Issue 3, 2021, Pages 1591-1606]
  • Choopani, Yahya Optimization of Parameters Affecting Magnetic Abrasive Finishing Process Using Response Surface Method [Volume 52, Issue 10, 2021, Pages 2691-2708]
  • Choupani, NaghdAli Experimental and Numerical Investigation on Mixed Mode Fracture of PMMA [Volume 51, Issue 5, 2019, Pages 1077-1088]
  • Choupani, NaghdAli Investigation of Fatigue Crack Growth in Superelastic NiTi Alloy by Using Digital Image Correlation Method [Volume 52, Issue 5, 2020, Pages 1167-1178]

D

  • Dabbagh, A. Wave Propagation in Embedded Temperature-dependent Functionally Graded Nano-plates Subjected to Nonlinear Thermal Loading According to a Nonlocal Four-variable Plate Theory [Volume 50, Issue 5, 2019, Pages 973-988]
  • Dadashi, َAmin Experimental Study of Effects of Hydrogen Embrittlement and Residual Stress on Mechanical Properties of GTD450 [Volume 53, Issue 12, 2022, Pages 5659-5678]
  • Dadgar-Rad, F. A C1 Finite Element Formulation for Mindlin-Reissner Microplate Model [Volume 51, Issue 1, 2019, Pages 3-18]
  • Dadkhah, Reza Numerical and Experimental Investigation the Effect of Pulsating Blankholder on Formability of Aluminum Alloy in Deep Drawing Process [Volume 43, Issue 2, 2012, Pages 57-63]
  • Dadvand, Abdolrahman Numerical simulation of droplet formation in a T-shape microchannel using two-phase level-set method [Volume 53, Issue 3 (Special Issue), 2021, Pages 1815-1838]
  • DAEI NIAKI, SEYED OMID Simulation of the Heating, Ventilation, and Air Conditioning System with Geothermal Energy and Solar Collector [Volume 52, Issue 2, 2020, Pages 347-364]
  • Daei Sorkhabi, Amir Hossein The Effect of Calcium Carbonate Nanoparticles and Compatibilizer on the Surface Roughness and the Surface Scratch Resistance of the Polyamide 6 [Volume 51, Issue 5, 2019, Pages 1069-1076]
  • Daga, Ashish Solvent Shifting Approach for Droplet Generation in a Microfluidic Device [Volume 48, Issue 3, 2016, Pages 323-329]
  • Daghighi, Maziyar Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2022, Pages 5851-5866]
  • Dalilsafaei, Seyf Design Enhancement of Mobile Snake Robots Based on Snake Anatomy [Volume 42, Issue 3, 2011, Pages 9-20]
  • Dalir, Hamid Flexural Vibration of Atomic Force Microscope Cantilever with Dimensional Effects [Volume 41, Issue 1, 2010, Pages 19-26]
  • Damangir, Ebrahimi Modeling and Experimental study of force convection frost formation over a curved surface [Volume 51, Issue 4, 2019, Pages 151-160]
  • DANANDEH OSKUEI, HOJJAT Investigating the Fluid-Solid Interaction in Incompressible Flow and The Effect of Oscillation Amplitude on Heat Transfer [Volume 53, Issue 9, 2021, Pages 4747-4772]
  • Daneshmand, Hamid Effect of Graphene Sheets Aggregation on The Dislocation-Blocking Mechanism of Nanolaminated Aluminum/Graphene Composite: Molecular Dynamics Simulation Study [Volume 53, Issue 8, 2021, Pages 4649-4664]
  • Daneshmehr, alireza A Three Dimensional Elasticity Solution of Single Layer Cylindrical Piezoelectric Panel under Dynamic Loading [Volume 41, Issue 1, 2010, Pages 9-17]
  • Danesh Mehr, Ali Reza Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Darabi, Armin Numerical Simulation of an Electro-Cyclone for Classification of Micron-Sized Particles [Volume 54, Issue 9, 2022, Pages 1971-1988]
  • Daramizadeh, Abdolhosein 2D Numerical Modeling of Compressible Two-Phase Flows Using Hyperbolic Two Pressure Two-Fluid Model [Volume 46, Issue 1, 2014, Pages 67-77]
  • Daremi Zadeh, Abdolhosein Two-dimensional numerical simulation of shock-bubble interaction in compressible two-phase flows [Volume 45, Issue 1, 2013, Pages 1-13]
  • Darmohammadi, Anis Study of the Motion Behavior of Soft Fiber Reinforced Actuators Based on Fiber Angle [Volume 53, Issue 8, 2021, Pages 4565-4580]
  • Daroudi, A. Measurement of Strain by Digital Shearography with a New Algorithm of Phase Calculation [Volume 50, Issue 1, 2018, Pages 25-32]
  • Darvishi, Farshid Investigation of the Free Longitudinal Vibration of Single-Walled Coiled Carbon Nanotubes (SWCCNTs) using Molecular Dynamics Simulation [Volume 51, Issue 3, 2019, Pages 91-100]
  • Darvishi, Mohammad Mehdi The Effect of Aspect Ratio and Temperature-dependent Fluid properties of Effective Parameters in Micro Heat Exchanger [Volume 43, Issue 1, 2012, Pages 41-49]
  • Darvishnezhad, Hosein Robust Control of Integrated Reverse Osmosis Desalination System with Photovoltaic Power Supply [Volume 54, Issue 3, 2022, Pages 567-588]
  • Dashtbayazi, M. R. Comparison of Artificial Neural Network Methods for Modeling of Turning of Polymer Matrix Composite [Volume 47, Issue 2, 2016, Pages 85-100]
  • Dashti, Isar Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Dashti Rahmatabadi, A. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
  • Dashti Rahmat Abadi, Vahideh Investigation of Geometric Characteristics on the Non-Reaction Supersonic Flow inside the Channel with the Presence of Cavities [Volume 53, Issue 11, 2022, Pages 5409-5428]
  • Dastmalchi, MAjid Numerical Study of Natural Convection of Al2O3-Water Nanofluid with Variable Properties in a Cavity [Volume 45, Issue 1, 2013, Pages 39-49]
  • Dastourani, H. Numerical Simulation of Drop Deformation and Breakup in an Electric Field [Volume 50, Issue 4, 2018, Pages 767-784]
  • Davaee Markazi, Amir Hosein Digital Control of Nonlinear Control Systems using a PIM Based Fuzzy Method [Volume 44, Issue 2, 2013, Pages 71-81]
  • Davaei Markazi, Amir Hossein Design and Implementation of Sliding Mode Control with the Modified Force for an Inverted Pendulum with Nonlinear Friction [Volume 54, Issue 12, 2023, Pages 2763-2780]
  • Davaq, A. Nonlinear Free Vibration in Flexure Beams with an Intermediate Rigid Element and a Tip Mass [Volume 50, Issue 1, 2018, Pages 125-136]
  • Davari, Ali R. A New Approach for Uncertainty Analysis of the Numerical Data Using Genetic Algorithm Based on Grid Refinement [Volume 51, Issue 6, 2020, Pages 1381-1394]
  • Davari, Ali R. Impact of Reduced Frequency on Pressure Distribution on the Lower Surface of a Supercritical Airfoil in Pitch-Pause-Return-Motion [Volume 52, Issue 4, 2020, Pages 971-984]
  • Davari, Ali R. Experimental Study of Inflow and Downwash Flow Fields under the Small Tandem Rotors [Volume 52, Issue 11, 2021, Pages 3071-3090]
  • Davarpanah, E. Numerical Simulation of a Piston-Type Wavemaker using Lattice-Boltzmann Method with Moving Nested Grids [Volume 50, Issue 4, 2018, Pages 799-812]
  • Davodi Nik, Ali Reza Large deflection of Flexible Functionally Graded Beams with Geometric Non-linearity: Analytical Approach [Volume 43, Issue 2, 2012, Pages 9-17]
  • Davoodabadi, Ali Prognostics of rolling element bearings using shock pulse method and vibration method records and employing feedforward neural-network [Volume 53, Issue 4 (Special Issue), 2021, Pages 2557-2576]
  • Davoodabadi Farahani, Amir Melting Process of Phase Change Materials in a Triplex-Tube: Arrangement, Newtonian and Non-Newtonian [Volume 54, Issue 5, 2022, Pages 1167-1180]
  • Davoodi, F. Evaluating the Effects of Individual Characteristics on Thermal Sensation in an Indoor Pool with Different Arrangements for Inlet Air Diffusers [Volume 50, Issue 6, 2019, Pages 1175-1184]
  • Davoodi, Farzin Effect of Gender and Body Fitness on the Thermal Sensation of Sleeping Occupants Under Task-Ambient Air Conditioning System [Volume 53, Issue 1 (Special Issue), 2021, Pages 453-466]
  • Dehestani, Mehdi Mechanical Properties and Structural Behavior of Bone at Nano Scale with Cohesive Element [Volume 53, Issue 2, 2021, Pages 745-776]
  • Dehghan, A. A. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
  • Dehghan, A.A. Experimental Investigation of Flow Induced Noise Around Circular Cylinder by Measuring Unsteady Surface Pressures [Volume 51, Issue 2, 2019, Pages 329-346]
  • Dehghan, Ali Akbar Experimental Study of the Downstream Flow of a Cylinder with Three Different Cross Sections by Hot Wire Anemometry [Volume 46, Issue 1, 2014, Pages 13-23]
  • Dehghan, Ali Akbar Semi-empirical Investigation of Trailing Edge Noise by Measuring Unsteady Surface Pressures [Volume 51, Issue 6, 2020, Pages 1253-1270]
  • Dehghan, Ali Akbar Experimental investigation of the turbulence effect of incoming flow on the unsteady pressure field and the flow noise around circular cylinder [Volume 52, Issue 4, 2020, Pages 923-942]
  • Dehghan, Ali Akbar Far-field Aeroacoustic Noise Prediction of a Tall Standard Building Model by Measuring Unsteady Surface Pressures [Volume 52, Issue 7, 2020, Pages 1885-1904]
  • Dehghan, Ali Akbar Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Dehghan, Ali Akbar Numerical Analysis of Parameters Affecting Turbulent Boundary Layer Trailing-Edge Noise [Volume 53, Issue 1 (Special Issue), 2021, Pages 437-452]
  • Dehghan, Ali Akbar Experimental Investigation of the Performance of Trailing Edge Noise-Reducing Finlets [Volume 53, Issue 9, 2021, Pages 4827-4846]
  • Dehghan, Mahnaz A New Approach for Uncertainty Analysis of the Numerical Data Using Genetic Algorithm Based on Grid Refinement [Volume 51, Issue 6, 2020, Pages 1381-1394]
  • Dehghan, Mojtaba Effect of Reversed Accumulative Roll Bonding Process on Microstructure, Mechanical Properties and Properties Inhomogeneity of AA1050 Alloy [Volume 48, Issue 2, 2016, Pages 197-206]
  • Dehghani, Mohammad Reza Vapor-Liquid-Liquid Equilibrium Calculation for Water and normal-Hexane binary mixture using Monte Carlo Molecular Simulation [Volume 48, Issue 3, 2016, Pages 239-246]
  • Dehghani Mohammadabadi, Mostafa The Feasibility Study of a Night Sky Radiative Cooling System for Cooling the Intake Air of a Gas Turbine [Volume 53, Issue 1, 2021, Pages 155-172]
  • Dehghan, M., M. A New Approach for Uncertainty Analysis of the Numerical Data Using Genetic Algorithm Based on Grid Refinement [Volume 51, Issue 6, 2020, Pages 1381-1394]
  • Dehghan Manshadi, M. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
  • Dehghan Manshadi, Mojtaba Far-field Aeroacoustic Noise Prediction of a Tall Standard Building Model by Measuring Unsteady Surface Pressures [Volume 52, Issue 7, 2020, Pages 1885-1904]
  • DEHVEDAR, M. Experimental Study of Freeing Stuck Pipe by Changing in Characterization and Additives of Mud Cake [Volume 50, Issue 4, 2018, Pages 863-872]
  • Delavari, Hadi Fractional order adaptive fuzzy terminal sliding mode controller design for a knee joint orthosis [Volume 51, Issue 3, 2019, Pages 151-160]
  • Deldar, Saber Study of the Natural Circulation Heat Recovery Steam Generator Unsteady Behavior Using One Dimensional Model for the Evaporator Loop [Volume 52, Issue 9, 2020, Pages 2369-2386]
  • Derakhshan Houre, Shahram Experimental and Numerical Study of a Vertical Axis Tidal Current Turbine [Volume 52, Issue 4, 2020, Pages 745-768]
  • Derakhshani, Seyed mohammad ebrahim Identification of LiBr-Water Solution Thermodynamic Properties using the ANN Technique [Volume 42, Issue 2, 2011, Pages 37-45]
  • Derazgisoo, S.M. A Power-law Preconditioning Approach for Accelerating the Convergence Rate of Steady and Unsteady Incompressible Turbulent Flows [Volume 51, Issue 2, 2019, Pages 437-454]
  • Deymi-Dashtebayaz, M. Investigation of the Cooling System Condenser Fans Performance at Different Speeds of Subway Train [Volume 51, Issue 2, 2019, Pages 365-380]
  • Dibajian, Seyed Hossein Numerical and experimental analysis of buckling of hemisphere shell made by spinning forming method subjected to uniform external pressure [Volume 55, Issue 6, 2023, Pages 759-772]
  • Diyani, Mohammad An investigation of solid phase distribution in metal foam produced by casting [Volume 44, Issue 2, 2013, Pages 113-119]
  • Dobakhti, Atabak Two-three degree of freedom model for Anti Stick-Slip Tool of drill-string [Volume 55, Issue 6, 2023, Pages 737-758]
  • Dogonchi, A.S. Investigating the Orientation of the Heater and Cooler on the Performance of a Mini Natural Circulation Loop with Cu-Water Nanofluid [Volume 52, Issue 11, 2021, Pages 3203-3224]
  • Dolati, F. Experimental Investigation of Flow and Heat Transfer in a Smooth Channel Affected by Vortex Generator with a Punched Hole [Volume 50, Issue 2, 2018, Pages 271-284]
  • Dolati, F. Analysis of Corona Wind Effect on Mass Transfer and Energy Consumption in Drying of Moist Object [Volume 51, Issue 2, 2019, Pages 281-296]
  • Dolati, S. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
  • Dolati, S. Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method [Volume 51, Issue 2, 2019, Pages 427-436]
  • Dolati, S. Numerical Investigation of the Effect of Plasma Actuator on the Film Cooling Effectiveness By Fan-Shaped Hole [Volume 50, Issue 6, 2019, Pages 1213-1228]
  • Donyavi, A. Investigation of the effective factors on strain distribution in round section roll forming process using the design of experiments [Volume 49, Issue 2, 2017, Pages 413-422]
  • Doralizadeh, Mohammad Masab Modeling and Nonlinear vibration analysis of Euler-Bernoulli beam under finite deformation [Volume 55, Issue 2, 2023, Pages 193-212]
  • Dorari, E. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]

E

  • Eatemadi, F. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
  • Eatesami renani, saied Mohsen Experimental Investigation of Effect of H Type Tail on Aerodynamic Coefficients of Aircraft Model, With and Without External Fuel Store [Volume 48, Issue 3, 2016, Pages 305-314]
  • Ebrahimi, Ebrahim Experimental Investigation of Cooling Performance Enhancement of a Photovoltaic Module Using a Phase Change Material-CuO Nanoparticles [Volume 52, Issue 2, 2020, Pages 281-296]
  • Ebrahimi, Esmaeil Numerical Study of the Flat Flame Burner Power Effect on the Producing Uniform Temperature Distribution in Cracking Furnaces [Volume 52, Issue 6, 2020, Pages 1379-1396]
  • Ebrahimi, F. Nonlinear Dynamic Response Analysis of Carbon Fiber Reinforced Polymer Enhanced with Carbon Nanotubes on Elastic Foundations in Thermal Environments [Volume 50, Issue 1, 2018, Pages 73-90]
  • Ebrahimi, F. Wave Propagation in Embedded Temperature-dependent Functionally Graded Nano-plates Subjected to Nonlinear Thermal Loading According to a Nonlocal Four-variable Plate Theory [Volume 50, Issue 5, 2019, Pages 973-988]
  • Ebrahimi, Farzad Vibration Analysis of Thin Circular FGM Plate Coupled with Piezoelectric Layers [Volume 41, Issue 1, 2010, Pages 1-8]
  • Ebrahimi, Fatemeh Analysis of the semi-elliptical crack in the FGM spherical pressure vessels [Volume 55, Issue 6, 2023, Pages 705-722]
  • Ebrahimi, Masood Techno-Economic Feasibility of Energy Supply Systems from Renewable Sources of Solar and Biomass in Rural Areas Located In Cold and Dry Climate [Volume 53, Issue 1, 2021, Pages 81-100]
  • Ebrahimi, Rahim Cycle to Cycle Combustion Variations in a Spark Ignition Engine Fuelled with Natural Gas [Volume 42, Issue 2, 2011, Pages 9-18]
  • Ebrahimi, Reza Analytical and Experimental Investigation of Frequency of Oscillation Modes in Combustion Chambers of Gas Turbines [Volume 42, Issue 2, 2011, Pages 27-35]
  • Ebrahimi, Reza Investigation of the Effect of Spray Fuel Injection Pattern on Evaporation of Droplets in the Gas Turbine Pre-mixer [Volume 52, Issue 4, 2020, Pages 833-846]
  • Ebrahimi, Reza Experimental Study of Premixed Methane-Air Flame Propagation in a Closed Duct with Porous Obstacle [Volume 52, Issue 11, 2021, Pages 3225-3240]
  • Ebrahimi, REZA An Investigation of Pollutants Emission of Methane-Air Combustion in Porous Burners (PBs), from the view point of numerical modeling [Volume 41, Issue 2, 2010, Pages 1-10]
  • Ebrahimi, Tina Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Ebrahimi Fordoei, Esmaeil Chemical and Physical Effects of Carbon Dioxide Injection with Different Preheating Temperature in Flameless Combustion [Volume 52, Issue 2, 2020, Pages 311-328]
  • Ebrahimi Fordoei, Esmaeil Study of The Effect of Wall Temperature and Oxidant Structure on Temperature Distribution and NO Emission in Non-Premixed Combustion Furnace [Volume 54, Issue 1, 2022, Pages 249-266]
  • Ebrahimi Mamaghani, A. Mathematical Modelling and Resonance Analysis in Impact Oscillators [Volume 51, Issue 1, 2019, Pages 157-168]
  • Ebrahimi Mamaghani, Ali On the Vibrational Analysis of Cantilevered Fluid Conveying Micro-Beams Rested on Various Elastic Foundations [Volume 52, Issue 1, 2020, Pages 3-16]
  • Ebrahimi Naghani, Peyman Experimental investigation of personalized ventilation effects on temperature, velocity, and draught discomfort distribution in an office [Volume 53, Issue 7, 2021, Pages 4397-4410]
  • Ebrahimqomi, Masoume The Effects of an Enclosure Inclination Angle and its Walls Movement Direction on Variable Properties Nanofluid Mixed Convection [Volume 46, Issue 1, 2014, Pages 1-12]
  • Ebrahimzade, Reza Effect of Ethanol, Biodiesel and Diesel Blend Fuel on Performance and Pollutants Parameters of Diesel Engine [Volume 43, Issue 1, 2012, Pages 11-17]
  • Edalati, Saeed Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat [Volume 53, Issue 9, 2021, Pages 4999-5016]
  • Edalati, Zahra The Comparison between Al2O3/water and CuO/water nanofluids experimental heat transfer performance inside triangular duct [Volume 47, Issue 1, 2015, Pages 91-99]
  • Eftari, Behrouz Analysis of Free Vibration of Sandwich Panels Based on Improved High-order Sandwich Panel Theory [Volume 43, Issue 2, 2012, Pages 27-33]
  • Eftekhari, Malihe Stability and bifurcation of a rotating blade with varying speed [Volume 53, Issue 4 (Special Issue), 2021, Pages 2459-2472]
  • Eftekhari, Mojtaba Stability and bifurcation of a rotating blade with varying speed [Volume 53, Issue 4 (Special Issue), 2021, Pages 2459-2472]
  • Eftekhari, R. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
  • Eghbali, MohammadReza Free vibration of axially functionally graded nanobeam with an attached mass based on nonlocal strain gradient theory via new ADM numerical method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1159-1178]
  • Eghbalpour, Roozbeh Investigation of Viscoelastic-Viscoplastic-Viscodamage Behavior of Polymers under Cyclic Loadings and Parametric Study of Their Mechanical Behavior [Volume 51, Issue 5, 2019, Pages 967-980]
  • Eghdami, Zahra Sadat Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still [Volume 54, Issue 9, 2022, Pages 2103-2120]
  • Eghtesad, Mohammad Robust Adaptive Backstepping Control of a Nonlinear System with Uncertainty, Disturbance and Unknown Time Delay [Volume 45, Issue 2, 2013, Pages 77-86]
  • Ehsani, Mohammad Free and Forced Vibration Analysis of Piezoelectric Patches Based on Semi-Analytic Method of Scaled Boundary Finite Element Method [Volume 52, Issue 12, 2021, Pages 3463-3484]
  • Ehsani, Mohammad Modeling of vibro-acoustic modulation induced by non-linear contact in the Euler-Bernoulli beam using the Fourier spectral element [Volume 53, Issue 6 (Special Issue), 2021, Pages 3809-3824]
  • Ehsani, Mohammad Uncertainty Quantification in the Assessment of the Characteristics of the Electromechanical Impedance Spectrum of a Rectangular Piezoelectric Patch [Volume 54, Issue 10, 2023, Pages 2351-2376]
  • Ehsaniseresht, Abbas Stability analysis and snap-through evaluation of the cable-driven continuum robots [Volume 53, Issue 4, 2021, Pages 2089-2104]
  • Ehsasi, Hazhir Investigation on the Effect of Pressure and Radius of Contact Surface Curvature on the Friction Coefficient in Contact Surfaces of Interference Fit Joints [Volume 52, Issue 8, 2020, Pages 2123-2134]
  • Ehyaei, Amir Farhad Double Hyperbolic Sliding Mode Control Based on Unscented Kalman Filter for Three-legged Mobile manipulator [Volume 53, Issue 4, 2021, Pages 2105-2116]
  • Einali, A. Simulation and Optimal Design of Solar Pool for Subsurface Irrigation [Volume 51, Issue 2, 2019, Pages 507-524]
  • Einolghozati, Mona Effect of microstructure features on the mechanical properties of spheroidized steel by crystal plasticity method. [Volume 53, Issue 6 (Special Issue), 2021, Pages 4079-4094]
  • Eivazi bagheri, Hadi A Comparative Study on the Effect of Ultrasonic Vibration on Aluminum Surface Properties in Electrical Discharge Alloying [Volume 52, Issue 3, 2020, Pages 657-668]
  • Elyasi, M. An Analytical Model and Numerical Simulations to Predict Process Parameters in the Tube Bending Under Internal Fluid Pressure [Volume 50, Issue 3, 2018, Pages 447-466]
  • Elyasi, Majid REFORMING INTERNAL PRESSURE AND AXIAL FEEDING LOADING PATHS IN HYDROFORMING PROCESS OF CYLINDRICAL STEPPED TUBE IN ORDER TO IMPROVE THE THICKNESS DISTRIBUTION [Volume 48, Issue 4, 2017, Pages 389-400]
  • Emami, Leyla Numerical and Empirical Investigation on Bending Behavior of Composite Bipolar Plates for PEM Fuel Cells [Volume 55, Issue 8, 2023, Pages 995-1008]
  • Emamian, Amin An Analytical and Experimental Study on Dynamics of Newtonian Falling Drops in Inertia Regime with Low Reynolds Numbers [Volume 52, Issue 11, 2021, Pages 3033-3044]
  • Emamian, Amin Analytical Solution of Heat Transfer in a Cone Made of Functionally Graded Material [Volume 53, Issue 1 (Special Issue), 2021, Pages 539-552]
  • Emamifar, Armin Analysis of the Heat Transfer in a Multilayer Living Tissue Using the Galerkin Weighted Residuals Method [Volume 52, Issue 9, 2020, Pages 2609-2626]
  • Emami Koopaei, Sobhan Effect of Electrostatic Field on a Fog Harvester Efficiency with Metal Porous Collector [Volume 55, Issue 1, 2023, Pages 45-60]
  • Emamzadeh, Abulghasem Investigating the Performance of a Hybrid Desiccant Cooling System and Trombe Wall and Optimizing Wall Area in a Stable Condition [Volume 52, Issue 11, 2021, Pages 3289-3306]
  • Emdadi, Mohammad Numerical Study of Water Droplet Impact on a Surface Using a Sharp Approach for Interface Modeling [Volume 51, Issue 6, 2020, Pages 1427-1442]
  • Erfan Manesh, Babak Analytical Solution of the Heat Transfer in Heterogeneous Composite Conical Shells with Temperature Dependent Conduction Coefficients [Volume 52, Issue 9, 2020, Pages 2581-2596]
  • Esfahanian, Mohsen State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Esfahanian, Vahid State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Esfahanian, Vahid Investigation of vehicle energy demand considering the modified tire power loss [Volume 53, Issue 6, 2021, Pages 3615-3628]
  • Esfahanipour, Akbar Multi-objective Genetic Algorithm Optimization of Natural Gas Pressure Drop Station Heaters Using the Entropy Generation Minimization Method [Volume 55, Issue 1, 2023, Pages 61-84]
  • Esfahaniyan, Vahid Investigation on Effect of Multiple Injection on Performance and Emission Reduction in a DI Diesel Engine [Volume 43, Issue 1, 2012, Pages 1-10]
  • Esfandyari, Mohammad Javad State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Eshaghi, Mahdi Experimental Study of Abrasive Flow Rotary Machining and Effect of Abrasive Paste Temperature on Material Removal Rate of the Process [Volume 51, Issue 5, 2019, Pages 1157-1166]
  • Eshraghi, H. Transient Numerical Analysis of a Tandem Compressor Stage [Volume 51, Issue 2, 2019, Pages 399-412]
  • Eskandari, Abdollah Design of a Pelton Turbine Installed on Centrifugal Pump in Reverse Osmosis System for Energy Recovery [Volume 51, Issue 6, 2020, Pages 1395-1410]
  • Eskandarijam, Jafar Numerical Investigation of Bending Strength of Composite Sandwich Panel with Grid Core for Use in PEM Fuel Cell Endplates [Volume 55, Issue 6, 2023, Pages 723-736]
  • Eslami, J. Numerical Study on the Effect of Air Diffuser Angle on the Flow Field and Contaminant Dispersion in a Ventilated Room [Volume 50, Issue 4, 2018, Pages 873-882]
  • Eslami farsani, Reza Tensile behavior of basalt and carbon fiber reinforced phenolic matrix composites under thermal shock cycles [Volume 44, Issue 2, 2013, Pages 1-9]
  • Eslami Farsani, Reza Improvement in the flexural properties of basalt fibers/epoxy-aluminum laminate composites using multi-walled carbon nanotubes [Volume 51, Issue 3, 2019, Pages 81-90]
  • Eslami Haghighat, Z. Impact of Reduced Frequency on Pressure Distribution on the Lower Surface of a Supercritical Airfoil in Pitch-Pause-Return-Motion [Volume 52, Issue 4, 2020, Pages 971-984]
  • Eslami Majd, A. Numerical Simulation of Drop Deformation and Breakup in an Electric Field [Volume 50, Issue 4, 2018, Pages 767-784]
  • Esmaeelian, Jafar Viscous Flow Analysis using Boundary Elements Method [Volume 41, Issue 2, 2010, Pages 47-54]
  • Esmaeili, Safa Computational Investigation of the Effects of Heat Source Position on the Performance of a Mixed Compression Supersonic Intake [Volume 52, Issue 4, 2020, Pages 1023-1036]
  • Esmaeili shayan, Mostafa Energy Management Model for a Standalone Hybrid Microgrid Using a Dynamic Decision-Making Algorithm [Volume 55, Issue 1, 2023, Pages 3-20]
  • Esmaeili Shayan, Sahra Energy Management Model for a Standalone Hybrid Microgrid Using a Dynamic Decision-Making Algorithm [Volume 55, Issue 1, 2023, Pages 3-20]
  • Esmaeilzare, A. Numerical Analysis and Optimization of Magnetic Flux Density in the Polishing Process with Magnetorheological Fluid [Volume 50, Issue 3, 2018, Pages 577-588]
  • Esmaelzadeh, Reza Cutoff Insensitive Implicit Guidance via Flight Path Angle Correction [Volume 51, Issue 3, 2019, Pages 141-150]
  • Esmaili, A. Theoretical and Experimental Analysis of Asbestos Phenolic Ablative Insulation [Volume 47, Issue 1, 2015, Pages 101-109]
  • Esmaili, Arash Analysis of Combined Conduction-Radiation Heat Transfer In Multilayer Insulations [Volume 46, Issue 1, 2014, Pages 47-56]
  • Esmailian, Ehsan Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
  • Esmailpour, Kazem Parametric Study of Temperature Field of Impinging Burner of Synthetic Gas by Interferometry Mach-Zehnder Method [Volume 51, Issue 4, 2019, Pages 51-60]
  • Esmalipour, Sina Modeling and Analysis the Bending Behavior of Soft Pneumatic Network Actuator with Hyperelastic Models [Volume 55, Issue 8, 2023, Pages 1021-1042]
  • Estajloo, M. Energy and Exergy Analyzes and Evaluation of Traditional Flatbread Bakeries [Volume 50, Issue 6, 2019, Pages 1389-1402]
  • Estajloo, Mohammad Analysis of Different Heat Transfer Mechanisms Portions during Traditional Flatbreads Baking to Improve Quality of Breads and Reducing Fuel Consumption [Volume 52, Issue 11, 2021, Pages 3307-3324]
  • Etemadi, A. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
  • E. Torkanpouri, Kaveh Global sensitivity analysis of nanomachining parameters by using dynamic scanning thermal microscope [Volume 53, Issue 4, 2021, Pages 2367-2384]
  • Ettefagh, Mir Mohammad The Effect of Anisotropic Bearings on Dynamics and Stability of the Ball-Spring Auto-balancer [Volume 52, Issue 5, 2020, Pages 1319-1332]
  • Ettefagh, Mir Mohammad Identification and damage detection of beam-like structure using vibration signals based on simulated model, real healthy state and deep convolutional neural network [Volume 53, Issue 4, 2021, Pages 2193-2216]
  • Ettefagh, Mir Mohammad Damage detection of offshore jacket structure using dynamic responses based on simulated model, intact state of real model and deep auto-encoder neural network [Volume 53, Issue 6 (Special Issue), 2021, Pages 3783-3808]
  • Ettehadi, Hossein Development of Blade Element Momentum Theory for Unsteady Flow with Regard to the Dynamic Stall Phenomenon [Volume 53, Issue 3, 2021, Pages 1439-1456]
  • Ettehadi, Hossein Simulation of Steady Incompressible Flow around a NACA0015 Airfoil Using Actuator Surface Method and Mass Corrected Interpolation Technique [Volume 54, Issue 5, 2022, Pages 1047-1080]
  • Ezzatneshan, Eslam Studying of droplet impingement on hydrophilic and hydrophobic curved surfaces by lattice Boltzmann method based on Allen-Cahn equation [Volume 53, Issue 5, 2021, Pages 2869-2886]
  • Ezzatneshan, Eslam Study of cavitation inception using multiphase lattice Boltzmann method with incorporating equations of state [Volume 53, Issue 5 (Special Issue), 2021, Pages 3151-3170]

F

  • Fadaee, M. Surface effect on free vibration behavior of circular graphene sheet with an eccentric hole [Volume 49, Issue 2, 2017, Pages 299-308]
  • Fadaei Tehrani, Alireza Analysis of Residual Material and Machining Error on Straight and Corner Curved Paths in Roughing of WEDM [Volume 45, Issue 2, 2013, Pages 119-137]
  • Faghih Khorasani, Ahmad Reza Experimental and Numerical Simulation of Fluid Flow and Inclusion Removal in the Steel Continuous Casting Tundish [Volume 52, Issue 7, 2020, Pages 1943-1954]
  • Fahimi Farzam, Maziar Experimental and numerical study of energy harvesting from sloshing of a liquid and its performance on shaper machine [Volume 53, Issue 6 (Special Issue), 2021, Pages 3911-3924]
  • Fahmideh, Vahid Thermal performance evaluation of a greenhouse solar dryer equipped with photovoltaic cells and phase change material [Volume 53, Issue 5 (Special Issue), 2021, Pages 3367-3384]
  • Fakhari, Mohammad Mahdi Numerical analysis of distinction boundary of surface roughness and wall blocks in laminar pressure-driven flow within the rugged microchannels [Volume 53, Issue 5 (Special Issue), 2021, Pages 3241-3256]
  • Fakhari, Vahid Edgewise Vibration Reduction of a Small-Scale Wind Turbine Blade with Considering Vibration Coupling [Volume 52, Issue 8, 2020, Pages 2261-2276]
  • Fakhari, Vahid Employing of shunt damping method to reduce edgewise vibration of small size wind turbine blade with considering the effect of vibration coupling [Volume 53, Issue 4, 2021, Pages 2073-2088]
  • Fakharian, Ahmad Nonlinear optimal control of an active transfemoral prosthesis using state dependent Riccati equation approach [Volume 53, Issue 4, 2021, Pages 2117-2136]
  • Fakoor, Mahdi Simulation of Orthotropic Damaged Zone Behavior Using Viscoelastic Models [Volume 48, Issue 4, 2017, Pages 401-410]
  • Fakoor, Mahdi Uncertainty Propagation Analysis in Free Vibration of Uncertain Composite Plate Using Stochastic Finite Element Method [Volume 52, Issue 12, 2021, Pages 3503-3520]
  • Falahatgar, Seyed Reza Discrete Element Method Simulation of Crack Propagation in Brittle Coatings [Volume 52, Issue 5, 2020, Pages 1153-1166]
  • Falahatgar, Seyed Reza Investigation on the Effect of Different Constitutive Models on the Forming Limit of the Sheet under Nonlinear Strain Path [Volume 54, Issue 4, 2022, Pages 925-944]
  • Falahatgar, Seyed Reza Theoretical Analysis of the Effects of Hardening Laws, Normal and Through Thickness Shear Stresses on Forming Limit Curves of AA6016-T4 [Volume 54, Issue 6, 2022, Pages 1391-1408]
  • Fallah, M. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Fallah, Mohammad Reza Determination of the Flutter Instability Boundary of a Composite Wing Using Support Vector Machine [Volume 52, Issue 12, 2021, Pages 3341-3352]
  • Fallah, Mohsen Advanced exergy and thermoeconomic analysis of the supercritical carbon dioxide recompression cycle: A comparative study [Volume 53, Issue 5, 2021, Pages 2967-2982]
  • Fallah, Mohsen Piezoelectric Energy Harvesting Using a Porous Beam Under Fluid-Induced Vibrations [Volume 53, Issue 8, 2021, Pages 4633-4648]
  • Fallah, Mohsen Advanced Exergy Investigation of Combined Cycle of Helium Reactor Gas Turbine with Organic Rankine Cycle [Volume 54, Issue 7, 2022, Pages 1553-1574]
  • Fallah, Narges Investigation of Effective Parameters on Dye Removal from Petrochemical Industry Effluents by Fenton and Electro-Fenton Methods [Volume 54, Issue 5, 2022, Pages 947-960]
  • Fallahi, Amir Numerical Analysis of Temperature Distribution in A 3-D MR Image-Based Human Finger Model under Severe Cold Conditions [Volume 51, Issue 4, 2019, Pages 171-180]
  • Fallahi Arezoodar, A. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
  • Fallahi Arezoodar, Ali reza Numerical and Experimental Investigation of Electromagnetic Inward Tube Forming in Coupled method [Volume 48, Issue 2, 2016, Pages 215-226]
  • FallahPour, Vahid Optimization of Carbon Fiber Reinforced Composite Grinding Process by Response Surface Method [Volume 54, Issue 2, 2022, Pages 481-490]
  • Fanaei Sheikholeslami, Tahereh Fabrication and characterization of a flexible nanogenerator using reverse electrowetting concept [Volume 53, Issue 5, 2021, Pages 3023-3034]
  • Fanaei Sheikholeslami, Tahereh Design and Multi-Objective Optimization of A Magnetohydrodynamic Drug Delivery Infusion Micropump [Volume 53, Issue 10, 2022, Pages 5221-5238]
  • Fanni, E. Designing a New Intelligent Image Processing Algorithm for Traffic Sign Detection and Recognition Based on Fuzzy Logic [Volume 50, Issue 1, 2018, Pages 207-218]
  • Farahani, M. Comparison of the Effects of Shot Blasting and Sandblasting Processes on the Strength of the Aluminum Adhesive Bonded Joints [Volume 50, Issue 5, 2019, Pages 1015-1022]
  • Farahani, M. Study on the Effects of Sanding on the Strength of the Adhesive Joints [Volume 50, Issue 3, 2018, Pages 619-626]
  • Farahani, Mohammadreza Condition monitoring of defective single lap adhesive joint using carbon nanotubes [Volume 53, Issue 2 (Special Issue), 2021, Pages 1321-1330]
  • Farahani, Somayeh Real Time Solution for Inverse Heat Conduction Problem in One-Dimensional Plate Utilizing Fuzzy- Proportional–Integral–Derivative Controller [Volume 53, Issue 1, 2021, Pages 303-316]
  • Farahani, Somayeh Investigating the Effect of Isothermal Channel Height on the Vibrational and Thermal Behavior of Elastically-Mounted Cylinder Affected by Unilateral and Bilateral Jet Flow [Volume 54, Issue 3, 2022, Pages 703-724]
  • Farahani, Somayeh Melting Process of Phase Change Materials in a Triplex-Tube: Arrangement, Newtonian and Non-Newtonian [Volume 54, Issue 5, 2022, Pages 1167-1180]
  • Farahat, S. Performance Optimization of an Irreversible Brayton Cycle, and Proposing New Definitions for Second Law Efficiency and Exergy [Volume 50, Issue 2, 2018, Pages 385-398]
  • Farahat, S. Simulation and Optimal Design of Solar Pool for Subsurface Irrigation [Volume 51, Issue 2, 2019, Pages 507-524]
  • Farahat, Said Experimental Investigation of the Bubbly Drag Reduction in the Presence of Axial Flow in a the Couette-Taylor System [Volume 47, Issue 1, 2015, Pages 33-45]
  • Farahat, Said The Feasibility Study of a Night Sky Radiative Cooling System for Cooling the Intake Air of a Gas Turbine [Volume 53, Issue 1, 2021, Pages 155-172]
  • Farahat, Said Numerical study and investigation of the effect of magnetic field on fluid hydrodynamic behavior [Volume 53, Issue 5, 2021, Pages 2857-2868]
  • Farahinia, A. R. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
  • Farahmand, Farzam onceptual Design of an Apparatus for Tri-axial Measurement of Lumbar Torques in Isometric Mode [Volume 42, Issue 1, 2011, Pages 45-53]
  • Farahnakian, Masoud Experimental investigation of the infeed method and machining parameters on the tool wear during thread milling [Volume 53, Issue 2 (Special Issue), 2021, Pages 1345-1356]
  • Farajpoor khanaposhtani, Mojtaba Steady Simulation of the Flow inside the Internal Combustion Engine Turbocharger’s Turbine [Volume 51, Issue 6, 2020, Pages 1469-1486]
  • Fardi, Amirhossein Improving the power coefficient of the Darrieus vertical axis wind turbine with the aid of morphing airfoils [Volume 53, Issue 5 (Special Issue), 2021, Pages 3227-3240]
  • Fardi, Amirhossein Improvement of aerodynamic coefficients of the airfoil with free form deformation with the aid of Artificial Neural Networks and Genetic Algorithm [Volume 53, Issue 7, 2021, Pages 4113-4132]
  • Farhadi, Mousa Numerical Simulation of Dynamic Behavior of Falling Two Adjacent Droplets Using Lattice Boltzmann Method [Volume 48, Issue 3, 2016, Pages 291-304]
  • Farhadi, Sirwan Vibration Analysis of Cable-Driven Parallel Robots to Define Critical Speeds [Volume 52, Issue 8, 2020, Pages 2317-2328]
  • Farid, Mehrdad Nonlinear Vibration and Stability Analysis of Thermally Postbuckled Double-Layered Graphene Sheet [Volume 52, Issue 8, 2020, Pages 2177-2194]
  • Faridzadeh, Maryam Laser Cladding of TiC/316LSS and Analysis of Input Parameters using Response Surface Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1269-1286]
  • Farjad Bastani, S. A Novel Algorithm for Automatic Parallel Parking a Car Based On Continuous-Curvature Clothoid Path Planning [Volume 50, Issue 5, 2019, Pages 1051-1060]
  • Farmahini farahani, Moein Analytical model for the non-premixed combustion of the titanium dust cloud in counter-flow geometry [Volume 53, Issue 5 (Special Issue), 2021, Pages 3307-3316]
  • Farmani, Mohammad Numerical Analysis of Parameters Affecting Turbulent Boundary Layer Trailing-Edge Noise [Volume 53, Issue 1 (Special Issue), 2021, Pages 437-452]
  • Farrahi, Ali Effect of Rotating Speed of Probe on Micro-Hardness, Tensile Strength, Fatigue Behavior and Failure Mode of Friction Stir Spot Weld of Al 6061-T6 of Lap-shear Specimens [Volume 51, Issue 3, 2019, Pages 31-40]
  • Farrokh, Mojtaba Determination of the Flutter Instability Boundary of a Composite Wing Using Support Vector Machine [Volume 52, Issue 12, 2021, Pages 3341-3352]
  • Farrokhi, Navid Experimental Study of the Effects of Fluid Physical Properties on Conduction Pump Performance [Volume 52, Issue 4, 2020, Pages 881-892]
  • Farrokhi, Navid Experimental Study of the Effects of Fluid Physical Properties and Working Temperature on Heat Transfer in Conduction Pump [Volume 53, Issue 3, 2021, Pages 1607-1620]
  • Farshchi, Mohammad Influence of Pseudo-Boiling Phenomenon and the Mass Flux Ratio on the Dynamics of Transcritical Shear Flame [Volume 53, Issue 9, 2021, Pages 4961-4980]
  • Farshchi Tabrizi, F. Thermodynamic Investigation of Cationic Surfactants Effect on Oil-Water Interfacial Tension [Volume 50, Issue 2, 2018, Pages 437-444]
  • Farshidianfar, Anoshirvan Flexural Vibration of Atomic Force Microscope Cantilever with Dimensional Effects [Volume 41, Issue 1, 2010, Pages 19-26]
  • Farshi Fasih, Hamid Reza Effect of Obstacles Location and Flow Injection on the Mixing of Two-Gaseous Flow in a Microchannel [Volume 54, Issue 9, 2022, Pages 2139-2156]
  • Farsi, Mohammad Ali Fatigue crack growth analysis via Wiener degradation model with random effects [Volume 53, Issue 4, 2021, Pages 2271-2286]
  • Farsi, Mohammad Ali Reliability analysis of rectangular plate under in-plane tensile loading using continuum damage mechanics theory [Volume 53, Issue 6, 2021, Pages 3645-3656]
  • Farsi, Mohammad Ali Reliability Analysis of An Inertial Navigation System and its Active Fault Detection and Isolation Unit [Volume 54, Issue 4, 2022, Pages 805-820]
  • Farzadi, Ali Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718 [Volume 52, Issue 10, 2021, Pages 2629-2646]
  • Farzaneh, Hamed Multiobjective Optimization of a Tri-Generation Organic Rankine Cycle for Power, Freshwater and Heat: Suitable Mixture of Three Fluid [Volume 54, Issue 5, 2022, Pages 1125-1148]
  • Farzaneh-Gord, Mahmood Multi-objective Genetic Algorithm Optimization of Natural Gas Pressure Drop Station Heaters Using the Entropy Generation Minimization Method [Volume 55, Issue 1, 2023, Pages 61-84]
  • Farzi, Ali Mathematical and Artificial Neural Network Simulation of NOx Selective Catalytic Reduction in a Monolithic Reactor [Volume 52, Issue 9, 2020, Pages 2465-2478]
  • Farzin, Mahmood Effects of Pre-Form Thickness Variations on Product Thickness Accuracy in Multi-Rollers Flow-Forming [Volume 44, Issue 2, 2013, Pages 103-112]
  • Fata, Ali Determination of Tool Temperature in Orthogonal Metal Cutting by Finite Element Method and its Comparison with Experimental Work [Volume 42, Issue 3, 2011, Pages 49-59]
  • Fatahi, Laleh Numerical Simulation of Liner Vibrations in a Laboratory Combustion Chamber [Volume 53, Issue 2, 2021, Pages 881-896]
  • Fatahi, Nima Simulation and Analysis of the First to Fourth Types of Compressed Natural Gas Tanks of Vehicles under the Explosive Loading [Volume 54, Issue 8, 2022, Pages 1895-1916]
  • Fathali, M Investigation of Different Turbulence Models Performance on High-turning Turbine Blade Loading Calculations [Volume 47, Issue 1, 2015, Pages 1-12]
  • Fathi, M. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Fathi, S. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
  • Fathian, Ashkan Study of the Motion Behavior of Soft Fiber Reinforced Actuators Based on Fiber Angle [Volume 53, Issue 8, 2021, Pages 4565-4580]
  • Fathollahi, A.B. Theoretical and Numerical Study and Comparison of the Inertia Effects on the Collapse Behavior of Expanded metal tube Absorber with Single and Double Cell under Impact Loading [Volume 50, Issue 5, 2019, Pages 999-1014]
  • Fatoraei, Naser A FSI Simulation of Thromboembolism in Carotid Artery Bifurcation: Roles of Bifurcation Dividing Angle on Arterial Hemodynamics [Volume 45, Issue 1, 2013, Pages 29-38]
  • Fatouraee, Nasser Numerical Simulation of Low-Density Lipoprotein Concentration Boundary Layer in a Straight Artery and the Effects of Wall Shear Stress [Volume 52, Issue 11, 2021, Pages 3143-3154]
  • Fattahi, Ayoub Studying of droplet impingement on hydrophilic and hydrophobic curved surfaces by lattice Boltzmann method based on Allen-Cahn equation [Volume 53, Issue 5, 2021, Pages 2869-2886]
  • Fattahi, H. Investigation of Ultrasonic Assisted Electro Discharge Machining with TiO2, Al2O3 and ZnO Nano-Powder [Volume 50, Issue 3, 2018, Pages 541-550]
  • Fattahi, Moslem Influences of Viscoelasticity and Streaming Potential on Surface Reaction Kinetics in Micro reactors [Volume 52, Issue 4, 2020, Pages 893-906]
  • Fazelzadeh Haghighi, S. A. Flutter Analysis of Adaptive Wing with the Adjustment of Spar Position [Volume 50, Issue 1, 2018, Pages 197-206]
  • Fazelzadeh Haghighi, S. Ahmad Modeling and Flutter Analysis of a Three Dimensional Box-Wing using Wagner Unsteady Aerodynamic Model [Volume 53, Issue 12, 2022, Pages 5809-5830]
  • Fazel Zarandi, Mohammad hoseyen Coordination of Production/ Order Policy for a Single Vendor Single Buyer chain with stochastic demand [Volume 41, Issue 1, 2010, Pages 77-86]
  • Fazilati, J. Dynamic Behavior Analysis of Moderately Thick Composite Laminated Plates Containing Square Delamination Using Spline-Finite Strip Method [Volume 50, Issue 1, 2018, Pages 63-72]
  • Fazilati, J. Free Vibration of, Functionally Graded Materials Cylindrical Shells on Elastic Foundation under Axial force, Lateral Pressure and Different Boundary Conditions [Volume 50, Issue 5, 2019, Pages 1097-1112]
  • Fazli, Mohamad An Improved Failure Modes and Effects Analysis as a New Framework to perform the Function Analysis Phase of products in the Value Engineering [Volume 53, Issue 8, 2021, Pages 4665-4690]
  • Fazli, Mohammad Survey, Experiment and Improvement of Micro Actuator Positioning for Precise Grinding by Neural Network [Volume 45, Issue 2, 2013, Pages 87-104]
  • Fekrmandi, Hadi Analysis of the Nonlinear Behavior of the Free Vibration of a Cantilever Beam with a Fatigue Crack Using Lindstedt- Poincare’s Method [Volume 46, Issue 2, 2015, Pages 81-93]
  • Felegari, Ali Haidar Actuators redundancy resolution scheme with computational time reduction purpose for parallel cable robots with considering the rupture limits of the cables [Volume 53, Issue 6, 2021, Pages 3479-3496]
  • Feli, Saeid Plugging of Metallic Plates under Normal Impact of Deformable Projectiles [Volume 42, Issue 1, 2011, Pages 67-75]
  • Feli, Saeid Deformation of Blunt Projectiles during Penetration into Deformable Medium Metallic Targets [Volume 42, Issue 1, 2011, Pages 77-87]
  • Feli, Saeid A study on the synergistic influence of reduced graphene oxide and MWCNTs on the mechanical properties of epoxy nanocomposite [Volume 53, Issue 6 (Special Issue), 2021, Pages 3971-3986]
  • Ferasat, Reza Stability Analysis of Predictive Control in Networked Control System Using Switching Control [Volume 53, Issue 10, 2022, Pages 5039-5054]
  • Ffotouhi Ghazvini, Faranak Development of a Reduced Order Model of Geostrophic Flow based on a Combination of Proper Orthogonal Decomposition and Long-Short Term Memory Network [Volume 54, Issue 11, 2023, Pages 2583-2600]
  • Fili, Milad Design and evaluation of a novel bi-evaporator combined power and refrigeration cycle working with various zeotropic mixtures [Volume 53, Issue 5, 2021, Pages 3003-3022]
  • Fili, Milad Development and Analysis of a Novel Multi-Generation System Fueled by Biogas with Smart Heat Recovery [Volume 54, Issue 7, 2022, Pages 1673-1700]
  • Firoozabadi, Bahar Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model [Volume 54, Issue 7, 2022, Pages 1533-1552]
  • Firoozi, Parham Electrical and Thermodynamic Characteristics of Non-transfer Arc and Electric Direct Current Plasma Torch with Air Working Gas [Volume 54, Issue 5, 2022, Pages 1149-1166]
  • Firoozzadeh, Mohammad Using Polyethylene Glycol, as a Phase Change Material and Fins for the Cooling of Photovoltaic Cells of the Crystalline Type [Volume 52, Issue 6, 2020, Pages 1551-1560]
  • Firoozzadeh, Mohammad An Experimental Investigation on the Convective Heat Transfer Coefficient and Nusselt Number in Water/Carbon Nanofluid [Volume 53, Issue 1, 2021, Pages 209-220]
  • Firouzabadi, H. A. Analysis of Residual Material and Machining Error on Straight and Corner Curved Paths in Roughing of WEDM [Volume 45, Issue 2, 2013, Pages 119-137]
  • Firouzi, B. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
  • Firozi, Ali Simulation of diesel engine in closed cycle direct spraying with the help of a ahtraghi of area 6Closed Cycle Simulation of DI Diesel Engine with Six Zone Combustion Model [Volume 45, Issue 1, 2013, Pages 109-123]
  • Foadaddini, A. Evaluating the Effects of Individual Characteristics on Thermal Sensation in an Indoor Pool with Different Arrangements for Inlet Air Diffusers [Volume 50, Issue 6, 2019, Pages 1175-1184]
  • Foadaddini, Ali Effect of Gender and Body Fitness on the Thermal Sensation of Sleeping Occupants Under Task-Ambient Air Conditioning System [Volume 53, Issue 1 (Special Issue), 2021, Pages 453-466]
  • Foadaddini, Ali Developing an alternating direction explicit-implicit domain-decomposition approach to solve heat transfer equation on graphics processing unit [Volume 53, Issue 3 (Special Issue), 2021, Pages 1915-1936]
  • Fooladi Mahani, Majid Optimal cooperative braking strategy design of regenerative and mechanical braking systems for in-wheel drive electric vehicles [Volume 55, Issue 4, 2023, Pages 433-460]
  • Foorginejad, Abolfazl Tire Hardness Modeling Based on Longitudinal Ultrasonic Velocity Using the Gaussian Process Regression [Volume 51, Issue 5, 2019, Pages 1005-1016]
  • Forotan, Mehdi Examination of RP and RT Technologies in Production of Turbine Blades IC Wax Patterns [Volume 41, Issue 1, 2010, Pages 99-107]
  • Foroutan, Kamran Superharmonic and Subharmonic Resonance Analysis of A Rectangular Hyperelastic Membrane Resting on Nonlinear Elastic Foundation Using The Method of Multiple Scales [Volume 53, Issue 8, 2021, Pages 4535-4564]
  • Forouzi Feshalami, Abbas Simulation of a Forced Multiple Effect Brine Concentration Process [Volume 54, Issue 3, 2022, Pages 509-530]
  • Forozandeh, Hamed Experimental investigation of the effect of the flame holder geometry on flame length and NOx and CO emissions in a non-premixed burnerr [Volume 51, Issue 4, 2019, Pages 141-150]
  • Fotouhi, A. Nonlinear Longitudinal Free Vibration of a Rod Undergoing Finite Strain [Volume 50, Issue 5, 2019, Pages 1085-1096]
  • Fotouhi, Ali Reza Modeling and Nonlinear vibration analysis of Euler-Bernoulli beam under finite deformation [Volume 55, Issue 2, 2023, Pages 193-212]
  • Fotouhi Qhazvini, Faranak Pollutants Transfer Simulation Model Using Combination of Augmented Reality and Computational Fluid Dynamics Techniques on Cell Phone Platform [Volume 55, Issue 1, 2023, Pages 143-156]
  • Fouladi, Nematollah Experimental Study of the Supersonic Exhaust Diffuser Spray Cooling System [Volume 52, Issue 7, 2020, Pages 1793-1808]
  • Fouladi, Nematollah Design and Analysis of Gas Ejector in High Altitude Test Facility [Volume 52, Issue 11, 2021, Pages 3015-3032]
  • Fouladi, Nematollah Numerical Analysis of Cross Section Time Variation Effects of the Supersonic Exhaust Diffuser [Volume 53, Issue 3, 2021, Pages 1469-1486]
  • Fouladi, Nematollah Numerical Simulation of Flow Separation in a Thrust Optimized Parabolic Nozzle [Volume 54, Issue 5, 2022, Pages 985-1006]

G

  • Gandomkar, Mohamad Numerical and experimental analysis of buckling of hemisphere shell made by spinning forming method subjected to uniform external pressure [Volume 55, Issue 6, 2023, Pages 759-772]
  • Gandomkar, mohammad Variable distance interdigitated electrodes design to improve the performance of cantilever piezoelectric thin films nanogenerators [Volume 53, Issue 4, 2021, Pages 2347-2366]
  • Gandomkar, Mohammad Numerical simulation of salt gradient solar pond by employing the solar radiation estimating function considering wall-shading effects [Volume 53, Issue 5 (Special Issue), 2021, Pages 3385-3400]
  • Ganjiani, Mahdi Numerical Analysis of Mechanical Behavior of Semi-Crystalline Polymers Based on Continuum Damage Mechanics [Volume 51, Issue 5, 2019, Pages 981-992]
  • Ganjiani, Seyed Mahdi Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature [Volume 52, Issue 1, 2020, Pages 265-278]
  • Ganjiani, Seyed Mahdi Investigation of Damage Growth by Measuring the Chord Modulus, Micro Hardness and Macro Hardness Variation in ST37 Steel [Volume 52, Issue 3, 2020, Pages 647-656]
  • Ganjiani, Seyed Mahdi Experimental Investigation of Fatigue Damage Development Using Microhardness and Chord Modulus Variation Methods in Stainless Steel 316L [Volume 52, Issue 10, 2021, Pages 2679-2690]
  • Ganjiani, Seyed Mahdi Numerical Simulation of Elastoplastic Behavior and Damage Evolution at Various Stress Triaxiality [Volume 53, Issue 12, 2022, Pages 5703-5724]
  • Ganjiani, Seyed Mahdi A New Method for Calculating the Fracture Strain of Shear and Notched Specimens at Various Temperature and Stress Triaxialities [Volume 54, Issue 8, 2022, Pages 1917-1932]
  • Garousi, Leili Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Gavagsaz-ghoachani, Roghayeh Experimental study on effective parameters on vertical axis wind turbine performance [Volume 53, Issue 5, 2021, Pages 2771-2790]
  • Gavagsaz Ghoachani, Roghayeh Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability [Volume 52, Issue 4, 2020, Pages 1005-1022]
  • Gerdooei, Mahdi Effect of Reversed Accumulative Roll Bonding Process on Microstructure, Mechanical Properties and Properties Inhomogeneity of AA1050 Alloy [Volume 48, Issue 2, 2016, Pages 197-206]
  • Gerdooei, Mahdi Improving Mechanical Properties of Ultrafine-Grained Titanium Produced through Warm ECAP Using a Novel Lubrication System [Volume 51, Issue 5, 2019, Pages 1047-1056]
  • Ghadak, Farhad Investigation of the Aerodynamic Design Effect on Point Mass Flight Parameters in Hypersonic Glider [Volume 54, Issue 3, 2022, Pages 649-670]
  • Ghadak, Farhad Improving aerodynamic and aeroacoustic performance of the propeller by synchronic wavy tubercles [Volume 55, Issue 9, 2023, Pages 1157-1172]
  • Ghadam, Farzad The Drag Coefficient Prediction of a Rising Bubble through a Non-Newtonian Fluid [Volume 52, Issue 4, 2020, Pages 863-880]
  • Ghadami, A. Flutter Analysis of Adaptive Wing with the Adjustment of Spar Position [Volume 50, Issue 1, 2018, Pages 197-206]
  • Ghadami, M. Numerical Investigation of the Target Geometry Influence on the Glare Damage Caused By Medium-Caliber AP-Projectile [Volume 51, Issue 1, 2019, Pages 53-64]
  • Ghader, Sarmad Diagnostical and observational analysis of clear air turbulence over the middle east and Iran [Volume 53, Issue 7, 2021, Pages 4203-4220]
  • Ghaderi, Seyed Hadi Improving Mechanical Properties of Ultrafine-Grained Titanium Produced through Warm ECAP Using a Novel Lubrication System [Volume 51, Issue 5, 2019, Pages 1047-1056]
  • Ghaderi, Seyed Hadi Experimental Determination of the Modified Drucker-Prager Cap Constitutive Model for 92 Percent Alumina Powder [Volume 52, Issue 10, 2021, Pages 2725-2740]
  • Ghaderi, Seyed Hadi Crystal Plasticity Finite Element Study of Necking Behavior of Aluminum Alloy Sheet Subject to Thickness-Stress [Volume 53, Issue 12, 2022, Pages 5755-5768]
  • Ghadimi, Mojtaba A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Ghadimi, Mojtaba Optimization of Characteristics and Construction of Composite Bipolar Plates of Polymer Fuel Cells [Volume 54, Issue 6, 2022, Pages 1373-1390]
  • Ghadimi, Zahra Accurate Calculation of Nodal Vectors in Isogeometric Analysis of Shell Structures Using Greville Points [Volume 53, Issue 10, 2022, Pages 5185-5202]
  • Ghadiri, M. Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2018, Pages 721-730]
  • Ghadiri, Mohammad Hosein Design and Kinematics Analysis of a Novel Cable Driven Parallel Active Joint [Volume 52, Issue 12, 2021, Pages 3397-3410]
  • Ghaebi, Hadi Design and evaluation of a novel bi-evaporator combined power and refrigeration cycle working with various zeotropic mixtures [Volume 53, Issue 5, 2021, Pages 3003-3022]
  • Ghaebi, Hadi Energy, Exergy and Thermoeconomic Analysis of the Novel Combined Cycle of Solid Oxide Fuel Cell and Biogas Steam Reforming for Cogeneration Power and Hydrogen [Volume 54, Issue 1, 2022, Pages 211-234]
  • Ghaebi, Hadi Development and Analysis of a Novel Multi-Generation System Fueled by Biogas with Smart Heat Recovery [Volume 54, Issue 7, 2022, Pages 1673-1700]
  • Ghaedamini, Morteza Investigation of the Humidifier Performance of Adding Gas Diffusion Layers Around Membrane for Fuel Cell Application [Volume 53, Issue 3, 2021, Pages 1653-1666]
  • Ghaedi, Mohammad Sadegh Nanovoid dynamics based on temperature dependent Young modulus and void formation energy in Nickel: a phase field study [Volume 52, Issue 12, 2021, Pages 3521-3532]
  • Ghafarian eidgahi, mohsen Modeling of the Magnetorheological Damper with Optimization Approach for Magnetic Fluid Molecular Properties [Volume 52, Issue 7, 2020, Pages 1975-1992]
  • Ghafarirad, Hamed Kinematic Modeling of a Spatial Soft Robot by an Improved Analytical Method Based on Serial Robots [Volume 53, Issue 2 (Special Issue), 2021, Pages 1065-1080]
  • Ghafarzade, M. Design and Construction of an Electronic Tiltmeter Calibrator and Estimation of Calibration Uncertainty [Volume 50, Issue 5, 2019, Pages 1113-1122]
  • Ghaffari, A. Modeling and Simulation of MGT-70 Gas Turbine start-up procedure [Volume 49, Issue 2, 2017, Pages 363-370]
  • Ghaffari, A. Design and Implementation of Intelligent Systems Detect the Driver’s Lack of Concentration [Volume 50, Issue 5, 2019, Pages 1145-1154]
  • Ghaffari, Ali Proposing a Finite Duration Cancer Treatment Using Multi-Objective Optimization [Volume 52, Issue 5, 2020, Pages 1365-1376]
  • Ghaffari, Ali Lane Change Path Planning in Emergency Situation Based on Skilled Driver's Performance [Volume 54, Issue 2, 2022, Pages 269-288]
  • Ghaffari, Ali Head-on Collision Avoidance Path Planning with Model Predictive Control [Volume 54, Issue 8, 2022, Pages 1737-1760]
  • Ghaf-Ghanbari, Pegah Kinematic and dynamic performance evaluation of a four degrees of freedom parallel robot [Volume 53, Issue 4, 2021, Pages 2055-2072]
  • Ghafoorian, M.M. Optimization of a Hybrid Multi-effect Desalination with Thermal Vapor Compression and Reverse Osmosis Desalination System Integrated to A Gas Turbine Cycle [Volume 50, Issue 6, 2019, Pages 1333-1350]
  • Ghafouri, Ashkan Numerical simulation of heat transfer and pressure drop of pseudo-plastic fluid in a pipe heat exchanger equipped with a modified twisted tape [Volume 53, Issue 5, 2021, Pages 3077-3098]
  • Ghafouri, Fateme Simultaneous Optimization of a Convex Sole as a Foot and Hip Trajectory for a Biped Robot with an Ankle without an Additional Degree of Freedom [Volume 52, Issue 12, 2021, Pages 3383-3396]
  • Ghafurian, Mohammad Mustafa Experimental Study and Economic Evaluation of a Cascade Solar Water Desalination Unit in Various Conditions [Volume 52, Issue 6, 2020, Pages 1513-1530]
  • Ghafurian, Mohammad Mustafa Steam generation via solar energy and localizing the light on the pinewood surface [Volume 53, Issue 3 (Special Issue), 2021, Pages 2001-2012]
  • Ghahramani, N. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Ghajar, R. Analytical Calculation of Stress Intensity Factors for Unequal Cracks Emanating from a Circular Hole in an Infinite Plane [Volume 50, Issue 5, 2019, Pages 943-950]
  • Ghajar, Rahmatollah Investigation of agglomeration and dispersion of reinforcement on the viscoelastic properties of CNT reinforced polymeric composites [Volume 48, Issue 4, 2017, Pages 363-370]
  • Ghalambaz, M. Static and Dynamic Pull-in Instabilities Analysis of Partially Affected Clamped Nano Actuators: The Substrate Effect [Volume 50, Issue 5, 2019, Pages 1023-1038]
  • Ghalambaz, M. Natural Convection Heat Transfer Inside a Square Enclosure with a Flexible Fin [Volume 50, Issue 2, 2018, Pages 233-254]
  • Ghalambaz, Mohammad Investigation of Heat Transfer of Non-Newtonian Pseudo-Plastic Fluids in Porous Heat Exchangers [Volume 53, Issue 1, 2021, Pages 241-258]
  • Ghalyanchi Langeroudi, Hossein Numerical and Experimental Analysis for Fluid Flow Inside Corrugated Tube quipped with Twisted Tapes [Volume 51, Issue 6, 2020, Pages 1339-1362]
  • Ghanadi-Azar, Roozbeh Study of Fretting Fatigue Behavior of Cylinder head Aluminum Alloy, with and without nano-Clay-Particles [Volume 54, Issue 4, 2022, Pages 885-904]
  • Ghanbari, Ahmad Design, Implementation and Experiments on a Fish-Like Robot [Volume 43, Issue 2, 2012, Pages 47-55]
  • Ghanbari, Roya Experimental Study of the Effect of Magnesium Oxide and Multi-Walled Carbon Nanotubes Hybrid Nanofluid on Increasing the Absorption Efficiency of Solar Radiation [Volume 54, Issue 5, 2022, Pages 1101-1124]
  • Ghanbarian, M. Comparison of Artificial Neural Network Methods for Modeling of Turning of Polymer Matrix Composite [Volume 47, Issue 2, 2016, Pages 85-100]
  • Ghannad, Mahdi 2-Dimensional Electroelastic Analysis of Piezoelectric Cylinders Using First-Order Shear Deformation and First-Order Electric Potential Theories [Volume 53, Issue 2, 2021, Pages 815-832]
  • Ghannad, Mehdi Effect of adding carbon nanotubes into the matrix material on the buckling behavior of glass/epoxy composite plates: An experimental study [Volume 53, Issue 4 (Special Issue), 2021, Pages 2613-2628]
  • Gharloghy, Javad Thermo-mechanical Analysis of SI Engine Piston using Concise Wall Temperature Model [Volume 43, Issue 1, 2012, Pages 19-30]
  • Gharraei Khosroshahi, Reza Experimental Study of Hydrodynamic Behavior and Breakup of Liquid Jet with/ without the Electric Field [Volume 51, Issue 6, 2020, Pages 1487-1498]
  • Ghasabzadeh Saryazdi, Maryam Singularity, dynamics and kinetics analysis of a 5-DOF parallel robot using screw theory [Volume 55, Issue 8, 2023, Pages 943-970]
  • Ghasemi, Ahmad Reza Determination and Reducing of Curvature from Residual Stresses in Cured Shapes by Using Carbon Nanotubes in Unsymmetric Carbon/Epoxy Laminates [Volume 51, Issue 5, 2019, Pages 1107-1018]
  • Ghasemi, Ahmad Reza Buckling analysis of tapered laminated composite channel-section beam-columns subjected to combined axial load and end moment [Volume 55, Issue 4, 2023, Pages 515-542]
  • Ghasemi, Ali Attitude Stabilization of Quadrotor Using Adaptive Fuzzy Proportional Integral Derivative Controller [Volume 53, Issue 2 (Special Issue), 2021, Pages 1081-1094]
  • Ghasemi, behzad Numerical Study of Natural Convection Heat Transfer inside a Triangular Cavity with Flexible Sidewalls Containing a Cylindrical Heat Source [Volume 53, Issue 11, 2022, Pages 5461-5484]
  • Ghasemi, H. Investigation of Step Sweep-Forward Angle Effects on the Hydrodynamic Performance of a Planing hull [Volume 50, Issue 4, 2018, Pages 903-912]
  • Ghasemi, Hassan Using the Propeller Pre-Swirl Stator to Reduce Underwater Vehicle Roll Motion and Increase Propeller Efficiency [Volume 55, Issue 1, 2023, Pages 123-142]
  • Ghasemi, Hassan Numerical Analysis of Pre-Swirl Stators for Ship Propeller [Volume 54, Issue 11, 2023, Pages 2459-2478]
  • Ghasemi, Jalal Hydrodynamic Behavior of Different No-Slip Condition on the Curved Boundaries in the Lattice Boltzmann Method [Volume 52, Issue 7, 2020, Pages 1925-1942]
  • Ghasemi, Jalal Determination of convective heat transfer coefficient in human femur bone drilling in the presence of normal saline and evaluation of effective parameters [Volume 55, Issue 5, 2023, Pages 557-576]
  • Ghasemi, M. A. Discrete Element Method Simulation of Crack Propagation in Brittle Coatings [Volume 52, Issue 5, 2020, Pages 1153-1166]
  • Ghasemikaram, Amirhossein Modeling and Flutter Analysis of a Three Dimensional Box-Wing using Wagner Unsteady Aerodynamic Model [Volume 53, Issue 12, 2022, Pages 5809-5830]
  • Ghasemi Kordlar, Amir Vertical growth of titanium dioxide nanorods on nebulizer fluorine doped tin oxide deposited on silicon microarrays [Volume 53, Issue 6 (Special Issue), 2021, Pages 4051-4062]
  • Ghasemlooy, Sajjad Numerical Simulation of Aero-Acoustic Noise from Supersonic Jet Reflection Using Computational Fluid Dynamics/Boundary Element Method [Volume 54, Issue 9, 2022, Pages 2061-2084]
  • Ghasemzadeh Moghadam, Mojtaba Numerical Investigation of the Effect of Shell Material and Thickness on the Mechanics of Motorcycle Helmets Impact [Volume 53, Issue 2, 2021, Pages 687-708]
  • Ghasimi, Seyed Danial Fluid-Structure Interactions Analysis of Tension in An Axon Using Finite Elements Modeling to Investigate Strain Related Neurological Damages [Volume 53, Issue 8, 2021, Pages 4609-4632]
  • Ghassemi, H. Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
  • Ghassemi, H. Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
  • Ghatee, Mojtaba Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Ghavami Gargari, Saeed Energy, Exergy and Thermoeconomic Analysis of the Novel Combined Cycle of Solid Oxide Fuel Cell and Biogas Steam Reforming for Cogeneration Power and Hydrogen [Volume 54, Issue 1, 2022, Pages 211-234]
  • Ghayour, Mostafa A Collision-Free Trajectory Planning of a hyper redundant Manipulator Using a Dual Genetic Algorithm [Volume 41, Issue 1, 2010, Pages 39-47]
  • Ghayour, Mostafa Modeling and Nonlinear vibration analysis of Euler-Bernoulli beam under finite deformation [Volume 55, Issue 2, 2023, Pages 193-212]
  • GHAZANFARI, AHMAD Determination Of Forming Limit Diageram Using Two Modified Finit Element Models [Volume 48, Issue 4, 2017, Pages 379-388]
  • Ghazanfarian, J. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
  • Ghazizadeh, Ali Optimization of Micro-Textured Tools Geometric Parameters in Turning of 17-4PH Stainless Steel [Volume 54, Issue 10, 2023, Pages 2411-2428]
  • Ghaznavi, Aidin Numerical and Experimental Study Of Energy Absorption of Multi-Layer Aluminum-Composite Conical Frustum Structures under Axial Loading [Volume 54, Issue 8, 2022, Pages 1851-1866]
  • Ghaznavi, Aidin Experimental Study of Preload and Bolt Arrangement on Composite Joint Performance in Megawatt Wind Turbine's Nacelle Cover and Nose Cone [Volume 55, Issue 7, 2023, Pages 837-856]
  • Ghaznavi Osgoee, Aydin Finite element modeling of T-shaped connector panel - sandwich subjected to tensile loading [Volume 44, Issue 2, 2013, Pages 11-19]
  • Gheysari, Reza An Experimental Investigation on the Effect of Vertical Distance and Inclination Angle of S-Shaped Channel on Two-Phase Flow Patterns [Volume 44, Issue 1, 2012, Pages 1-10]
  • Ghiasi, Mahmoud Roll Dynamic Stability of an Autonomous Underwater Vehicle with a Fish-like Hull Shape [Volume 52, Issue 7, 2020, Pages 2011-2026]
  • Ghiasvand, Amir Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy [Volume 53, Issue 6, 2021, Pages 3751-3760]
  • Ghiyasi Shahraky, Hamidreza The development of power-law preconditioning approach for simulation of unsteady viscoelastic flows [Volume 55, Issue 3, 2023, Pages 381-406]
  • Ghoddosian, Ali Torque minimization of 2-DOF parallel robot using counterweights and trajectory planning [Volume 53, Issue 4 (Special Issue), 2021, Pages 2409-2422]
  • Ghoddosian, Ali A new optimal structural boundary modification algorithm in the multi-objective topology optimization of microgripper [Volume 53, Issue 4, 2021, Pages 2261-2270]
  • Ghodrati, M. An Air Zonal Model for Predicting Air Flow, Temperature Distribution and Humidity Distribution in Buildings [Volume 47, Issue 1, 2015, Pages 47-57]
  • Ghodsbin Jahromi, A. Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2018, Pages 685-696]
  • Ghogha, hamid Experimental investigation of the infeed method and machining parameters on the tool wear during thread milling [Volume 53, Issue 2 (Special Issue), 2021, Pages 1345-1356]
  • Gholami, oveas Design, Modeling, and Optimal Position Control of a New Wrist Rehabilitation Robot Using the Stewart Platform [Volume 54, Issue 12, 2023, Pages 2705-2724]
  • Gholami, Peyman Fatigue crack growth analysis via Wiener degradation model with random effects [Volume 53, Issue 4, 2021, Pages 2271-2286]
  • Gholami, Peyman Reliability analysis of rectangular plate under in-plane tensile loading using continuum damage mechanics theory [Volume 53, Issue 6, 2021, Pages 3645-3656]
  • Gholami, Raheb Free Vibrations of Embedded Functionally Graded Graphene Platelets Reinforced Porous Nanocomposite Plates with Various Shapes Using P-Ritz Method [Volume 54, Issue 2, 2022, Pages 391-414]
  • Gholamian, Elahe Thermodynamic Analysis of Refrigerants Pairs in Two Stages Cascade Vapor Compression Refrigeration Cycle for Cooling of Telecommunications Equipment with Volume Decreasing Approach [Volume 52, Issue 2, 2020, Pages 329-346]
  • Gholami Ghale Nazeri, Siavash Effect of Vortex Generator on a Wavy Wall Heat Exchanger Performance for Turbulent Nanofluid Flow under a Magnetic Field [Volume 52, Issue 2, 2020, Pages 493-508]
  • Gholampour Yazdi, Mostafa Numerical Study of Catalyst Bed Performance of a Monopropellant Thruster Under Influence of Porosity Coefficient [Volume 54, Issue 7, 2022, Pages 1607-1622]
  • Gholipour, Hamed Network Modeling to Investigate the Effect of Coupling the Transport Phenomena on Water Distribution in Gas Diffusion Layer [Volume 53, Issue 11, 2022, Pages 5505-5528]
  • Ghoolipour, Hamed Micromechanical Damage Model for Plasticity of ‎Metals to Predict Failure under Shear Loads [Volume 53, Issue 12, 2022, Pages 5679-5702]
  • Ghorbanali, Saeed Investigating of the stability and structural, mechanical and electronic properties of two new superhard conductive carbon structures [Volume 55, Issue 10, 2024, Pages 1207-1218]
  • Ghorbanbakhsh, Bahador An Experimental Investigation of Multi-Phase Flow and the Effect of Fracture on Enhanced Oil Recovery in the Porous Medium [Volume 54, Issue 11, 2023, Pages 2499-2518]
  • Ghorbani, L. Imitating Sound Ankle Behavior with a Powered Below-Knee Prosthesis and Validation of its Mechanical Performance [Volume 50, Issue 5, 2019, Pages 1137-1144]
  • Ghorbani, S. Numerical Investigation of Integrated Biomass Gasification and Planar Solid Oxide Fuel Cell [Volume 49, Issue 1, 2017, Pages 219-230]
  • Ghoreishi, M. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
  • Ghoreishi, Majid Investigation of Machining of Compressor Blade Root using Wire Electrical Discharge Process [Volume 41, Issue 2, 2010, Pages 63-71]
  • Ghoreishi, Seyyed Alireza Double Hyperbolic Sliding Mode Control Based on Unscented Kalman Filter for Three-legged Mobile manipulator [Volume 53, Issue 4, 2021, Pages 2105-2116]
  • Goharkhah, Mohammad Point to Point Control of a Liquid Carrying Quadrotor [Volume 54, Issue 4, 2022, Pages 727-746]
  • Golaghapour Kami, Meysam Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Golshah, Arash Design and Manufacturing of a Vibration Absorber for Sound Reduction of a Turboprop Aircraft [Volume 44, Issue 1, 2012, Pages 91-99]
  • Golzar, Mina Development of a Reduced Order Model of Geostrophic Flow based on a Combination of Proper Orthogonal Decomposition and Long-Short Term Memory Network [Volume 54, Issue 11, 2023, Pages 2583-2600]
  • Golzari, Masoud Sound Transmission Loss of Truncated Conical Shells with Porous Materials [Volume 53, Issue 2, 2021, Pages 923-942]
  • Golzari, S. Energy Simulation and Parametric Analysis of Water Cooled Photovoltaic/Thermal System [Volume 50, Issue 6, 2019, Pages 1361-1374]
  • Goodarzi, Mohmmadreza Effects of air injection at rotor blade row tip region of an axial compressor on its performance under inlet distortion conditions [Volume 53, Issue 3 (Special Issue), 2021, Pages 1729-1744]
  • Gorji, A. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
  • Gorji, Abdolhamid REFORMING INTERNAL PRESSURE AND AXIAL FEEDING LOADING PATHS IN HYDROFORMING PROCESS OF CYLINDRICAL STEPPED TUBE IN ORDER TO IMPROVE THE THICKNESS DISTRIBUTION [Volume 48, Issue 4, 2017, Pages 389-400]
  • Gorji, H. Numerical and Experimental Investigation of Effective Parameters on Formability of Al-St Two Layer Sheet Metals [Volume 50, Issue 3, 2018, Pages 517-528]
  • Gorji, H. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
  • Gorji, Hamid The Study of Effective Process Parameters in the Warm Sheet Hydroforming [Volume 51, Issue 5, 2019, Pages 1057-1068]
  • Gorji, Hamid A Comparative Study on the Effect of Ultrasonic Vibration on Aluminum Surface Properties in Electrical Discharge Alloying [Volume 52, Issue 3, 2020, Pages 657-668]
  • Gorji, Hamid Experimental Study and Finite Element Simulation for Determining the Forming Window of 6063-O Aluminum Tube in Warm Hydroforming Process [Volume 52, Issue 3, 2020, Pages 571-586]
  • Gorji, Mohammad-Mahdi Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Gorji Bandpy, M. The Experimental Study of Effective Characteristics on Differential Pressure Value Setting of Quarter-turn Actuator in Gas Transportation Pipelines [Volume 50, Issue 4, 2018, Pages 837-848]
  • Goshayeshi, Hamidreza Experimental investigation on MWCNTs-COOH nano fluid on 3D oscillating heat pipe [Volume 53, Issue 5 (Special Issue), 2021, Pages 3401-3416]
  • Goshtasbirad, Ebrahim Experimental Investigation of Effect of H Type Tail on Aerodynamic Coefficients of Aircraft Model, With and Without External Fuel Store [Volume 48, Issue 3, 2016, Pages 305-314]
  • Goudarzi, M. Numerical Study on Laminar Flow Over a Cylinder and Its Rotating Controllers for Suppressing the Vortex Shedding [Volume 50, Issue 4, 2018, Pages 849-862]
  • Goudarzi, Masoud Looseness Detection and Assessment of Flange Type Joints Using Vibro-Acoustic Modulation Method [Volume 52, Issue 10, 2021, Pages 2661-2678]
  • Goudarzi, Masoud Experimental and Numerical Looseness Detection and Assessment in Flanged Joints Using Vibro-Acoustic Modulation Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1331-1344]

H

  • Habibi, S. Nonlinear Dynamic Response Analysis of Carbon Fiber Reinforced Polymer Enhanced with Carbon Nanotubes on Elastic Foundations in Thermal Environments [Volume 50, Issue 1, 2018, Pages 73-90]
  • HABIBI, MOSTAFA Determination Of Forming Limit Diageram Using Two Modified Finit Element Models [Volume 48, Issue 4, 2017, Pages 379-388]
  • Habibi Siyahpoosha, Ehsan Frequency Analysis and Parametric Estimation of Bubble Formation in Vertical Column [Volume 52, Issue 7, 2020, Pages 1829-1846]
  • Habibnejad korayem, Moharam Path Design and Control of a Moving Social Robot in an Environment with Moving Obstacles in Order to Reach a Moving Target through Fuzzy Control [Volume 53, Issue 2, 2021, Pages 993-1014]
  • Habibnezhad Ledari, Behnam Experimental Investigation on the Thermal Resistance of Straight Heat Pipes with Double-Ended Cooling and Middle-Heating at Different Tilt Angles [Volume 53, Issue 1, 2021, Pages 279-302]
  • Habibnia, M. Investigation of Parameters on the Efficiency of the Fuel cell Based on the Principles of Sealing [Volume 50, Issue 2, 2018, Pages 425-436]
  • Habibnia, Mostafa A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Habibzadeh Sharif, Amir Designing an Optimal Non-Linear Controller for an Active Vehicle Suspension System and Investigating its Effect on Electrical Energy Harvesting [Volume 54, Issue 12, 2023, Pages 2741-2762]
  • Hadad, K. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
  • Hadad Baygi, Seyed Mahdi Design of a Hybrid Adaptive Neuro-Fuzzy Inference System Proportional–Integral– Derivative Controller for Vibration Mitigation of a Structure against Earthquake [Volume 52, Issue 8, 2020, Pages 2293-2316]
  • Hadavi, Seyed Mohamad Mehdi Study of Rheological Behavior of Water-Ethylene Glycol /Nano Al2O3 –Nano Graphene Hybrid Nanofluid at Low Temperatures [Volume 54, Issue 4, 2022, Pages 905-924]
  • Haddadpour, Hassan Nonlinear Torsional Vibrations of Axially Loaded Pretwisted Beam with Primary Resonance Excitations [Volume 54, Issue 6, 2022, Pages 1271-1302]
  • Hadi, A. Free Vibration of, Functionally Graded Materials Cylindrical Shells on Elastic Foundation under Axial force, Lateral Pressure and Different Boundary Conditions [Volume 50, Issue 5, 2019, Pages 1097-1112]
  • Hadian, Shahram Design, Manufacturing, and Test of a Wearable Device to Monitor Athlete's Body Movements [Volume 54, Issue 3, 2022, Pages 671-686]
  • Hadidoolabi, M. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
  • Hadidoolabi, Mostafa Experimental Study of Aerodynamic Behavior of NACA0012 Airfoil near the Surface [Volume 54, Issue 1, 2022, Pages 123-144]
  • Hadidoolabi, Mostafa Meshless Method for Numerical Solution of Internal Flows with Axial Symmetry [Volume 55, Issue 3, 2023, Pages 285-302]
  • Hadipour, A. Experimental Analysis of Heat Transfer from Round Jet Impinging to Asymmetric Concave Surface [Volume 50, Issue 6, 2019, Pages 1229-1236]
  • Haghani, Seyyed Omid Numerical Study on the Effect of Blower Location on the Maximum Temperature and Spread of Smoke In Case Of Fire inside Tunnels [Volume 52, Issue 11, 2021, Pages 3241-3256]
  • Haghani, Seyyed Omid Numerical simulation simultaneous use of longitudinal ventilation and smoke extraction from the ceiling in fires inside tunnels [Volume 53, Issue 7, 2021, Pages 4411-4428]
  • Haghi, Seyed Behzad Investigation of hydrogen production process by partial oxidation of natural gas in a large non-catalytic reformer and comparison with methane steam reforming process in a small catalytic reformer [Volume 53, Issue 5 (Special Issue), 2021, Pages 3275-3292]
  • Haghighat, H. A New Deformation Model for Bimetal Tubes Extrusion Process [Volume 49, Issue 4, 2018, Pages 819-828]
  • Haghighat, Heshmatollah Geometric Modeling, Upper Bound Analysis and Finite Volume Metal Simulation of Spur Gear Precision Forging [Volume 41, Issue 1, 2010, Pages 67-75]
  • Haghighifard, H. Effect of Support on Wind Flow Field Around Array of Two Inline Buildings [Volume 51, Issue 2, 2019, Pages 249-260]
  • Haghighi-Yazdi, Mojtaba Desired Properties of Disc in Numerical Models and Its Influence on Biomechanical Behavior of Lumbar Spine [Volume 52, Issue 1, 2020, Pages 187-202]
  • Haghiri, Ali A New Mathematical Model for Cloud Flame Structure with Premixed Organic Particles [Volume 42, Issue 2, 2011, Pages 19-26]
  • Hagh panahi, Mohammad Numerical and Experimental Study of residual stress distribution due to multipass welding of stainless steel plates Pas·h [Volume 44, Issue 2, 2013, Pages 21-28]
  • Haghparast, A. Experimental and Numerical Study of Hydrodynamic Deep Drawing Process of Rectangular Cups and Blank Shape Optimization [Volume 49, Issue 4, 2018, Pages 851-862]
  • Haghparast, A. Static and Dynamic Pull-in Instabilities Analysis of Partially Affected Clamped Nano Actuators: The Substrate Effect [Volume 50, Issue 5, 2019, Pages 1023-1038]
  • Hajdizadeh, Afra Study of Young’s Modulus and Failure Strength of Polyurethane-Based Binary Polymer Composite Structures Based on Stress-Strain Curve for Tissue Engineering Vascular Graft Application [Volume 52, Issue 12, 2021, Pages 3567-3582]
  • Hajhashemkhani, M. Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
  • Hajiahmadi, Farima Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Hajialigol, Najme The Effects of an Enclosure Inclination Angle and its Walls Movement Direction on Variable Properties Nanofluid Mixed Convection [Volume 46, Issue 1, 2014, Pages 1-12]
  • HajiAliMohammadi, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
  • Hajian, Ramin Solvent Shifting Approach for Droplet Generation in a Microfluidic Device [Volume 48, Issue 3, 2016, Pages 323-329]
  • Hajian, Ramin Techno-economic feasibility study of using heat pipe heat exchanger to improve dehumidification in air-handling unit [Volume 55, Issue 3, 2023, Pages 303-336]
  • Hajian, Ramin Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Hajidavalloo, E. Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
  • Hajidavalloo, E. Numerical and Experimental Study of Two-phase Flow in Downward vertical Pipe [Volume 51, Issue 2, 2019, Pages 413-426]
  • Haji ghafoori boukani, N. Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
  • Haji ghafoori boukani, Navid Numerical Investigation of Vortex-Induced Vibrations of an elastically-mounted Circular Cylinder Beneath a Free Surface: Modes & Frequencies [Volume 51, Issue 6, 2020, Pages 1169-1186]
  • Hajighafoori Boukani, N. Numerical Investigation of Vortex-Induced Vibrations of an Elastically-Mounted Circular Cylinder beneath a Free Surface [Volume 50, Issue 4, 2018, Pages 727-740]
  • Hajimohamadi, M. Analytical Calculation of Stress Intensity Factors for Unequal Cracks Emanating from a Circular Hole in an Infinite Plane [Volume 50, Issue 5, 2019, Pages 943-950]
  • Hajiri, Ahad Effect of Ethanol, Biodiesel and Diesel Blend Fuel on Performance and Pollutants Parameters of Diesel Engine [Volume 43, Issue 1, 2012, Pages 11-17]
  • Hajlotfalian, Mostafa Three-dimensional surface capture from the back anatomy to quantify three-dimensional vertebral column curvatures without using anatomical markers [Volume 53, Issue 4 (Special Issue), 2021, Pages 2629-2638]
  • Hajmohammadi, Mohammad Reza Geometric Optimization of Highly Conductive Inserts with Variable Thickness Embedded in a Fin [Volume 52, Issue 9, 2020, Pages 2569-2580]
  • Hajmohammadi, Mohammad Reza Numerical Simulation of Convective Heat Transfer of Nano-Encapsulated Phase Change Material Slurries in Micro-Channels with Sinusoidal Cavities and Rectangular Ribs [Volume 54, Issue 1, 2022, Pages 169-188]
  • HakKak, Faras onceptual Design of an Apparatus for Tri-axial Measurement of Lumbar Torques in Isometric Mode [Volume 42, Issue 1, 2011, Pages 45-53]
  • Hakkakifard, Ali Numerical Modeling of Combined Transient Radiation and Conduction Heat Transfer in Mineral Wool Insulations [Volume 43, Issue 1, 2012, Pages 51-58]
  • Hakkaki-Fard, Ali Shape Optimization of Supersonic Ejector to Enhance its Performance in Refrigeration Applications [Volume 52, Issue 6, 2020, Pages 1659-1674]
  • Hakkaki-Fard, Ali Comparison of long-term performance and the initial cost of the horizontal ground source heat pump with the air source heat pump in hot regions [Volume 53, Issue 5 (Special Issue), 2021, Pages 3317-3334]
  • Halvaei, Iman Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
  • Hamed, Mohammad Ali Control of Vehicle’s Mixed Longitudinal and Lateral Stability with Engine Dynamics Using Super Twisting Control Algorithm [Volume 53, Issue 2, 2021, Pages 959-978]
  • Hamedi, Mohammad Hosein Image-based numerical model for drug delivery to solid tumors [Volume 53, Issue 5 (Special Issue), 2021, Pages 3187-3200]
  • Hami, Masoud Numerical Investigation of Channel Cross-section Effect on the Performance of Integrated Thermoelectric Power Generator [Volume 54, Issue 9, 2022, Pages 2195-2212]
  • Hamidi, Mehdi Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Hamidi, Sabah Numerical Modelling of Transonic Two Phase Flow with Shock in Converging-Diverging NozzleDiverging Nozzle [Volume 45, Issue 1, 2013, Pages 15-27]
  • Hamidi, Sabah Numerical analysis of moist-air flow in converging-diverging nozzle with equilibrium and non-equilibrium thermodynamic models [Volume 55, Issue 9, 2023, Pages 1113-1134]
  • Hamzavi Loueh, Mostafa Numerical Study of the Effect of Geometric Parameters on the Performance of Solid-Liquid Ejectors [Volume 55, Issue 1, 2023, Pages 105-122]
  • Hanafizadeh, P. Numerical and Experimental Study of Two-phase Flow in Downward vertical Pipe [Volume 51, Issue 2, 2019, Pages 413-426]
  • Hanafizadeh, Pedram The Effect of Shear Stress of Liquid-Vapor Interface with and without Mass Transfer on Thermal Performance of a Thermosyphon [Volume 41, Issue 2, 2010, Pages 55-62]
  • Hardt, Steffen Solvent Shifting Approach for Droplet Generation in a Microfluidic Device [Volume 48, Issue 3, 2016, Pages 323-329]
  • Hasanabadi, Ehsan A new optimal structural boundary modification algorithm in the multi-objective topology optimization of microgripper [Volume 53, Issue 4, 2021, Pages 2261-2270]
  • Hasan Nejad, Reza Asymptotic Analysis of the Free Vibration of a Cantilever Beam with a Fatigue Crack [Volume 42, Issue 1, 2011, Pages 55-66]
  • Hasanvand, Amin Analysis of an Auxiliary Household Underfloor Heating and Domestic Hot Water System Using Solar Energy in a Cold Area [Volume 54, Issue 5, 2022, Pages 1081-1100]
  • Hasanvand, Nima Analytical model for the non-premixed combustion of the titanium dust cloud in counter-flow geometry [Volume 53, Issue 5 (Special Issue), 2021, Pages 3307-3316]
  • Hasanzadeh, H. Evaluating the Effects of Individual Characteristics on Thermal Sensation in an Indoor Pool with Different Arrangements for Inlet Air Diffusers [Volume 50, Issue 6, 2019, Pages 1175-1184]
  • Hasanzadeh, H. Numerical Study of Brinkman Number Effects on Heated Viscoelastic Fluid Flow in Channel with Sudden Expansion [Volume 51, Issue 2, 2019, Pages 483-496]
  • Hasanzadeh, Hasan Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
  • Hasanzadeh, Hasan Evaluation of the Impact of Fan Coil Airflow Velocity on the Micron Particles Distribution in the Human Breathing Zone [Volume 52, Issue 6, 2020, Pages 1675-1686]
  • Hasanzadeh, Mahdi Study on Performance of Sandwich Panel Structures with Honeycomb Core Subjected to Impulsive Loading [Volume 52, Issue 10, 2021, Pages 2823-2838]
  • Hashemabadi, M. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
  • Hashemabadi, Mahdi Meshless Method for Numerical Solution of Internal Flows with Axial Symmetry [Volume 55, Issue 3, 2023, Pages 285-302]
  • Hashemabadi, Mahdi Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Hashemi, J. An Experimental Comparison of Dimensional and Geometrical Tolerances in Milled Holes on AISI D2 Steel [Volume 50, Issue 3, 2018, Pages 671-680]
  • Hashemi, M. Finite Element Analysis of Vibration Behavior of Micro-Rotors Utilizing a Developed Strain Gradient-Based Beam Element [Volume 50, Issue 1, 2018, Pages 113-124]
  • Hashemi, Mahmoodreza Experimental and Numerical Study of a Vertical Axis Tidal Current Turbine [Volume 52, Issue 4, 2020, Pages 745-768]
  • Hashemi, Ramin Theoretical Analysis of the Temperature and Strain Rate Effects on the Forming Limit Diagram of AA3104 [Volume 52, Issue 3, 2020, Pages 555-570]
  • Hashemi, S. A. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
  • Hashemi, sayyed Hojjat Experimental and Numerical Investigation of Initial Notch Radius Effect on Charpy Fracture Energy in API X65 Steel [Volume 52, Issue 5, 2020, Pages 1139-1152]
  • Hashemi, Seyed abdolmahdi Experimental Study of the Effect of Firing Rate and Equivalence Ratio on Performance of a Porous Metal Radiant Burner [Volume 44, Issue 1, 2012, Pages 35-46]
  • Hashemi, Seyed abdolmahdi Experimental Study of Flame Stability in SiC Porous Media [Volume 43, Issue 1, 2012, Pages 59-70]
  • Hashemi, seyed Abdolmehdi An Experimental Study on the Flashback in a Porous Media [Volume 46, Issue 1, 2014, Pages 25-35]
  • Hashemi, seyed Abdolmehdi Experimental study of stability of V-shaped flame in a premixed swirl burner [Volume 48, Issue 3, 2016, Pages 315-322]
  • Hashemi, Seyed mohammad rezs Experimental and Numerical Investigation of Fatigue Behavior of Polylactic acid Components Made by Additive Manufacturing Method [Volume 53, Issue 6, 2021, Pages 3703-3716]
  • Hashemi, S. H. Experimental and Numerical Determination of Fracture Toughness in Gas Pipeline Steel of Grade API X65 [Volume 45, Issue 2, 2013, Pages 1-9]
  • HASHEMI, RAMIN Determination Of Forming Limit Diageram Using Two Modified Finit Element Models [Volume 48, Issue 4, 2017, Pages 379-388]
  • Hashemian, Seyed Ali Numerical Investigation of the Effect of Shell Material and Thickness on the Mechanics of Motorcycle Helmets Impact [Volume 53, Issue 2, 2021, Pages 687-708]
  • Hashemi Kachapi, Seyyed Habiballah Improve the Geometric Profile of the Sprocket Wheel in Power Transmission System of Bicycle for Adjustment the Amplitude of Pedal Acceleration [Volume 46, Issue 2, 2015, Pages 23-33]
  • Hashemi Nader, Farshad Modeling and Sliding Mode Control of Rotating Helical Pump [Volume 52, Issue 8, 2020, Pages 2277-2292]
  • Hasheminasab, Mohammadreza Experimental Investigation of the Influence of Polymer Electrolyte Membrane Fuel Cells Operating Conditions on Its Performance and Water Management [Volume 52, Issue 11, 2021, Pages 3257-3274]
  • Hasheminasab, Mohammadreza Simulation, manufacturing and test of a transparent proton-exchange membrane fuel cell [Volume 53, Issue 3 (Special Issue), 2021, Pages 2031-2052]
  • Hashemi-Pour Moosavi, Shahin Stability analysis and snap-through evaluation of the cable-driven continuum robots [Volume 53, Issue 4, 2021, Pages 2089-2104]
  • Hashemitabar, Seyyed Ali Developing a CDM Based Model for Creep-Fatigue Life Assessment of a Gas Turbine Blade [Volume 52, Issue 10, 2021, Pages 2951-2966]
  • Hashemi Tari, Pooyan Experimental study on effective parameters on vertical axis wind turbine performance [Volume 53, Issue 5, 2021, Pages 2771-2790]
  • Hashemi Tari, Pooyan Wind simulation in a complex terrain by numerical weather prediction method using large eddy simulation [Volume 53, Issue 7, 2021, Pages 4221-4240]
  • Hashemi-Tilehnoee, Mehdi Investigating the Orientation of the Heater and Cooler on the Performance of a Mini Natural Circulation Loop with Cu-Water Nanofluid [Volume 52, Issue 11, 2021, Pages 3203-3224]
  • Hashemzadeh, S.M. Numerical Simulation of Filter Cake Formation on Borehole Walls Considering Effect of Non-Newtonian Drilling Fluid and Eccentricity [Volume 49, Issue 3, 2017, Pages 521-534]
  • Hassanbeigi, Reza Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Hassani, Behrouz Accurate Calculation of Nodal Vectors in Isogeometric Analysis of Shell Structures Using Greville Points [Volume 53, Issue 10, 2022, Pages 5185-5202]
  • Hassani, Maryam Two-dimensional simulation of nucleation pool boiling and investigation of phase change mechanism at low heat fluxes [Volume 53, Issue 3 (Special Issue), 2021, Pages 1883-1896]
  • Hassanifard, Soran Numerical Simulation of Laser Welding and Evaluation of Residual Stress and Temperature Distribution in Lap Joint of AA6061 and AA5086 Aluminum Alloys in Different Thicknesses [Volume 52, Issue 3, 2020, Pages 587-604]
  • Hassanzadeh, Hasan Effect of Gender and Body Fitness on the Thermal Sensation of Sleeping Occupants Under Task-Ambient Air Conditioning System [Volume 53, Issue 1 (Special Issue), 2021, Pages 453-466]
  • Hassanzadeh, Maryam Development and Analysis of a Novel Multi-Generation System Fueled by Biogas with Smart Heat Recovery [Volume 54, Issue 7, 2022, Pages 1673-1700]
  • Hassanzadeh, Rahim Investigation of the effect of free-wind velocity on the performance of small-scale vertical axis wind turbine [Volume 53, Issue 3 (Special Issue), 2021, Pages 1709-1728]
  • Hatami, H. Theoretical and Numerical Study and Comparison of the Inertia Effects on the Collapse Behavior of Expanded metal tube Absorber with Single and Double Cell under Impact Loading [Volume 50, Issue 5, 2019, Pages 999-1014]
  • Hatami, Hossein Numerical Behavior Study of Expanded Metal Tube Absorbers and Effect of Cross Section Size and Multi-Layer under Low Axial Velocity Impact Loading [Volume 49, Issue 4, 2018, Pages 685-696]
  • Hataminasab, Mohsen Numerical Analysis of Cross Section Time Variation Effects of the Supersonic Exhaust Diffuser [Volume 53, Issue 3, 2021, Pages 1469-1486]
  • Hatefi, Mohammad Ali A Technique for Solving Distributor’s Pallet Loading Problem (DPLP), Using Dynamic Programming [Volume 44, Issue 2, 2013, Pages 121-130]
  • Hayeri Yazdi, Mohammad Reza Investigation of vehicle energy demand considering the modified tire power loss [Volume 53, Issue 6, 2021, Pages 3615-3628]
  • Hayeri Yazdi, Mohammad Reza Investigation of wave propagation in architected uniform triangle mass center fractal nano-bio-filters based on microtubules [Volume 53, Issue 6 (Special Issue), 2021, Pages 3939-3952]
  • Hazeri-Mahmel, N. Numerical Study of Mixed Convection Heat Transfer in a Cavity Filled with NonNewtonian Nanofluids Utilizing Two-phase Mixture Model [Volume 50, Issue 6, 2019, Pages 1199-1212]
  • Hedayati-Mehdiabadi, Erfan Thermoeconomic Analysis of a Double Slope Basin Solar Still Equipped to Phase Change Material and Photovoltaic Thermal Collector [Volume 52, Issue 6, 2020, Pages 1531-1550]
  • Hedayatizadeh, Mahdi Thermal performance evaluation of a greenhouse solar dryer equipped with photovoltaic cells and phase change material [Volume 53, Issue 5 (Special Issue), 2021, Pages 3367-3384]
  • Heidari, Hamidreza Cooperative path planning for leader – follower formation of Multi UAV based on the minimum energy consumption for load transportation [Volume 52, Issue 12, 2021, Pages 3327-3340]
  • Heidari, Mehran Numerical Simulation of Induced Vibrations Due to Low Frequency Flow Oscillations around Piezoelectric Blades to Design the Best Configuration for Energy Harvesting [Volume 54, Issue 9, 2022, Pages 2009-2040]
  • Heidarinejad, G. Comparison of the Hemodynamic Parameters of Sequential Parallel and Cross Configurations of Coronary Artery in the Rest State [Volume 51, Issue 2, 2019, Pages 497-506]
  • Heidarinejad, Ghassem Viscous Flow Analysis using Boundary Elements Method [Volume 41, Issue 2, 2010, Pages 47-54]
  • Heidarinejad, Ghassem Numerical Study of the Hemodynamic Parameters of Y-Bypass Graft at Rest and Exercise State [Volume 51, Issue 6, 2020, Pages 1325-1338]
  • Heidarinejad, Ghassem The Importance of the Compatible Combustion and Sub-grid Scale Models on the Simulation of Large-Scale Pool Fire [Volume 52, Issue 9, 2020, Pages 2425-2442]
  • Heidarinejad, Ghassem Study of Anastomosis Obtuse Angles to Reduce Fistula Failure with Numerical Simulation [Volume 52, Issue 11, 2021, Pages 3057-3070]
  • Heidarinejad, Ghassem The Effect of Inner Walls Reflection on Microorganisms Inactivation in Water Ultraviolet Reactor using computational fluid dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 375-392]
  • Heidarinejad, Ghassem Dynamic Simulation of Desiccant Cooling System with Simultaneously Using Solar and Ground Renewable Energies in Hot-Humid Regions [Volume 53, Issue 3, 2021, Pages 1549-1572]
  • Heidarinejad, Ghassem Temporal analysis of the fistula at three anastomosis angles of 45, 90, and 135 degrees [Volume 53, Issue 3 (Special Issue), 2021, Pages 1799-1814]
  • Heidarinejad, Ghassem Numerical investigation of compartment fire under maximum and minimum of natural ventilation using flamelet generated manifold combustion model [Volume 53, Issue 5 (Special Issue), 2021, Pages 3335-3350]
  • Heidarinejad, Ghassem Numerical Simulation of Compartment Fire with Flamelet Generated Manifold and Comparison with Other Combustion Models [Volume 54, Issue 3, 2022, Pages 493-508]
  • Heidarinejad, Ghassem Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model [Volume 54, Issue 7, 2022, Pages 1533-1552]
  • Heidarinejad, Ghassem Investigation of Different Internal Flows Using Different Transitional Models [Volume 54, Issue 9, 2022, Pages 1989-2008]
  • Heidarinejad, Ghassem Numerical Study of Microbubble Dynamics Subjected to Ultrasound and Its Effect on Thermal Ablation of Biological Tissue [Volume 54, Issue 11, 2023, Pages 2561-2582]
  • Heidarinejad, Ghassem Numerical Simulation of the Dispersion of Human Sneeze Droplets In The Surrounding [Volume 55, Issue 1, 2023, Pages 85-104]
  • Heidarinejad, Ghassem Numerical simulation of two consecutive human sneezing and examining the dispersion of the resulting droplets in the surroundings [Volume 55, Issue 7, 2023, Pages 875-894]
  • Heidarinejad, Ghassem Numerical study of the spread of toxic and hot fire gases in a multi-storey residential complex with and without sprinkler fire extinguishing system [Volume 55, Issue 11, 2024, Pages 1-1]
  • Heidari Shirazi, Kourosh Crack identification in postbuckled plates using differential quadrature element method and sequential quadratic programming [Volume 51, Issue 3, 2019, Pages 51-60]
  • Heidari Soreshjani, Masoud A numerical investigation on the effect of blade tip shapes on power generation of a horizontal axis wind turbine [Volume 53, Issue 5, 2021, Pages 2791-2806]
  • Heidary, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
  • Heidaryb, H. Experimental Study in Drilling Composite Pipes Manufactured by Filament Winding Process Using Full Factorial Design Method [Volume 50, Issue 3, 2018, Pages 489-504]
  • Heidary Sadrabady, Hossein A New Direct Filtering Approach based on the Interactive Multiple Model Method in the Global Positioning System/Inertial Navigation System Integration [Volume 54, Issue 12, 2023, Pages 2725-2740]
  • Heinrich, Martin Circumferential Casing Treatment in a Transonic Fan [Volume 53, Issue 7, 2021, Pages 4189-4202]
  • Heinrich, Martin A Theory for Predicting Stall Cell Transient Behavior [Volume 53, Issue 9, 2021, Pages 4773-4788]
  • Hekmat, Shahriyar Experimental Investigation on the Performance of Hybrid Thermal Management System Based on Water Cooling and Phase Change Material for a Lithium Battery Module of an Electric Vehicle [Volume 51, Issue 4, 2019, Pages 21-30]
  • Hematiyan, M.R. Boundary conditions identification in problems of hyper-elastic materials deformation [Volume 49, Issue 2, 2017, Pages 261-268]
  • Hemmasian Ettefagh, Massoud Computation algorithms of feasible sets and robust feasible sets for constrained linear time-invariant systems parametrized with orthonormal functions [Volume 51, Issue 3, 2019, Pages 171-180]
  • Hemmati, Seyed Jalal Experimental Study of Abrasive Flow Rotary Machining and Effect of Abrasive Paste Temperature on Material Removal Rate of the Process [Volume 51, Issue 5, 2019, Pages 1157-1166]
  • Hemmat zadeh, M. Numerical Study of Overlay Welding Effects on Residual Stresses in Girth Welded Steel Pipes [Volume 50, Issue 3, 2018, Pages 479-488]
  • Hesami, Hanieh Three-Dimensional Numerical Study of Solid Oxide Fuel Cell Performance with Converging Diverging Flow Field [Volume 54, Issue 3, 2022, Pages 589-614]
  • Heshmat Ebrahim Hesari, Hossein Preparation of Polystyrene-Starch Composite by Melt Extrusion and Evaluation of its Mechanical, Thermal Biodegradation Properties [Volume 52, Issue 10, 2021, Pages 2741-2758]
  • Heshmati, Mahmood A study on the synergistic influence of reduced graphene oxide and MWCNTs on the mechanical properties of epoxy nanocomposite [Volume 53, Issue 6 (Special Issue), 2021, Pages 3971-3986]
  • Heshmati, Mahmood Investigation of Interlaminar Mode-I Fracture Toughness of Corrugated Composite Plates [Volume 54, Issue 2, 2022, Pages 415-432]
  • Heydari, Ali Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
  • Heydari, H. Optimal Trajectory Planning of a Quadrotor Based on Minimum Effort [Volume 51, Issue 1, 2019, Pages 169-179]
  • Heydari, Hamed Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
  • Heydari, Hamed Numerical Investigation of Elastoplastic and Damage Behavior of Cortical Bone by Applying a New Damage Model [Volume 54, Issue 6, 2022, Pages 1423-1442]
  • Heydari, Mohammad Hosein Fractional calculus approach for bending of viscoelastic plate using two-variable refined plate theory [Volume 53, Issue 4, 2021, Pages 2287-2308]
  • Heydari Nejad, Ghasem Simulation of Solar Double Effect Ammonia - water Cooling Systems and its Performance for Different Climates of Iran [Volume 43, Issue 1, 2012, Pages 85-91]
  • Heydarzadeh, mohammad sadegh Design Enhancement of Mobile Snake Robots Based on Snake Anatomy [Volume 42, Issue 3, 2011, Pages 9-20]
  • Heyhat, Mohammad Mahdi Experimental Study of the Effect of Magnesium Oxide and Multi-Walled Carbon Nanotubes Hybrid Nanofluid on Increasing the Absorption Efficiency of Solar Radiation [Volume 54, Issue 5, 2022, Pages 1101-1124]
  • Hojaji, Mohammad Numerical/Experimental Investigation of the Presence of a Protuberance in a Convergent – Divergent Nozzle in Supersonic Regime to Control the Thrust Vector [Volume 53, Issue 9, 2021, Pages 4887-4904]
  • Hojaji, Mohammad Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
  • Hojaji, Mohammad Effect of Electrostatic Field on a Fog Harvester Efficiency with Metal Porous Collector [Volume 55, Issue 1, 2023, Pages 45-60]
  • Hojjati, A.H. Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method [Volume 51, Issue 2, 2019, Pages 427-436]
  • Homaeinezhad, Mohammad Reza Pattern Recognition of Unbalanced Rigid Rotor Bearing Forces [Volume 54, Issue 6, 2022, Pages 1249-1270]
  • Homayoun Fard, Milad Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature [Volume 52, Issue 1, 2020, Pages 265-278]
  • Honari, mohamad Vapor-Liquid-Liquid Equilibrium Calculation for Water and normal-Hexane binary mixture using Monte Carlo Molecular Simulation [Volume 48, Issue 3, 2016, Pages 239-246]
  • Honarpisheh, M. Experimental and Numerical Investigation of Forming Force of Ti-6Al-4V Sheet in Electric Hot Incremental Forming Process of a conical part [Volume 49, Issue 2, 2017, Pages 401-412]
  • Honarvar, Farhang Ultrasonic Guided Wave-Based Inspection of Straight Seam Welded Pipes [Volume 52, Issue 10, 2021, Pages 2647-2660]
  • Honarvar, Mohammad Hadi Simultaneous Optimization of a Convex Sole as a Foot and Hip Trajectory for a Biped Robot with an Ankle without an Additional Degree of Freedom [Volume 52, Issue 12, 2021, Pages 3383-3396]
  • Honarvar, Mohammad Hadi Three-dimensional surface capture from the back anatomy to quantify three-dimensional vertebral column curvatures without using anatomical markers [Volume 53, Issue 4 (Special Issue), 2021, Pages 2629-2638]
  • Honaryar, Amir Roll Dynamic Stability of an Autonomous Underwater Vehicle with a Fish-like Hull Shape [Volume 52, Issue 7, 2020, Pages 2011-2026]
  • Hooshmand, M. Evaluating the Effects of Individual Characteristics on Thermal Sensation in an Indoor Pool with Different Arrangements for Inlet Air Diffusers [Volume 50, Issue 6, 2019, Pages 1175-1184]
  • Hooshmand, Seyed Mohammad Effect of Air Curtain on Occupants Thermal Comfort and Indoor Air Quality in an Athletic Swimming Pool with Spectators’ Stand [Volume 53, Issue 1, 2021, Pages 191-208]
  • Hooshmand, Seyed Mohammad Effect of Gender and Body Fitness on the Thermal Sensation of Sleeping Occupants Under Task-Ambient Air Conditioning System [Volume 53, Issue 1 (Special Issue), 2021, Pages 453-466]
  • Hooshmand, Seyed Mohammad Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Hormozi, Faramarz Experimental Study of the Stability of Deionized Water Based Copper Oxide Nanofluid and Achievement to the Optimal Stability Conditions [Volume 48, Issue 1, 2016, Pages 17-30]
  • Hosein Ali Pur, Seyed Mostafa Multi Objective Optimization of Feedwater Heating Repowering on a Steam Power Plant Using the Genetic Algorithm [Volume 45, Issue 1, 2013, Pages 93-108]
  • Hoseini, Sadegh Numerical Investigation of Bending Strength of Composite Sandwich Panel with Grid Core for Use in PEM Fuel Cell Endplates [Volume 55, Issue 6, 2023, Pages 723-736]
  • Hoseini, S. Amirhosein Free and Forced Vibration Analysis of Kelvin-Voigt Viscoelastic Nanoplate by Using Modified Couple Stress Theory [Volume 52, Issue 1, 2020, Pages 173-186]
  • Hoseini Abardeh, Reza Optimization of Segmented Thermoelectric Generator and Calculation of Performance [Volume 45, Issue 1, 2013, Pages 83-91]
  • Hoseini Moghadam Emami, Ali The Optimization of Heat Transfer Distribution in a Heated Room Using Convective Thermal Panels for Achievement of Thermal Comfort [Volume 45, Issue 1, 2013, Pages 63-73]
  • Hoseini Sarvari, Seyed Masoud Simultaneously Reconstruction of Radiation-Conduction Properties of Nanomaterial Thermal Insulators with Particle Swarm Optimization Algorithm [Volume 52, Issue 9, 2020, Pages 2551-2568]
  • Hoseinkhani, Behnam Design and Implementation of Sliding Mode Control with the Modified Force for an Inverted Pendulum with Nonlinear Friction [Volume 54, Issue 12, 2023, Pages 2763-2780]
  • Hosein Pur, Siamak The Effects of Using Porosity Profiles on Performance and Emission of Pollutants in the Porous Media Burners [Volume 45, Issue 1, 2013, Pages 51-61]
  • Hosein Zade Kashan, Ali New Lower Bounds for the Optimal Makespan on a Single Batch Processing Machine [Volume 43, Issue 2, 2012, Pages 75-84]
  • HOSEYNI, HOSEYN Investigation of initiation and evolution of delamination in glass/epoxy laminated composites using acoustic emission method [Volume 48, Issue 4, 2017, Pages 411-422]
  • Hoshangi, Hasan Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Hossein, Amirhossein Investigation of the Aerodynamic Design Effect on Point Mass Flight Parameters in Hypersonic Glider [Volume 54, Issue 3, 2022, Pages 649-670]
  • Hossein, Amirhossein Aerodynamic Design of a Hypersonic Glide Vehicle Based on the Cone-Derived Wave rider Configuration Method [Volume 55, Issue 7, 2023, Pages 797-818]
  • Hossein, Amirhossein Improving aerodynamic and aeroacoustic performance of the propeller by synchronic wavy tubercles [Volume 55, Issue 9, 2023, Pages 1157-1172]
  • Hosseinalipoor, Seyed Mostafa Numerical Investigation of Vortex-Induced Vibrations of an elastically-mounted Circular Cylinder Beneath a Free Surface: Modes & Frequencies [Volume 51, Issue 6, 2020, Pages 1169-1186]
  • Hosseinalipoor, S. M. Numerical Investigation of Flow past a Circular Cylinder beneath a Free Surface with Volume of Fluid Method [Volume 49, Issue 1, 2017, Pages 11-18]
  • Hosseinalipour, Seyed mostafa Identification of LiBr-Water Solution Thermodynamic Properties using the ANN Technique [Volume 42, Issue 2, 2011, Pages 37-45]
  • Hosseinalipour, S.M. Numerical Investigation of Vortex-Induced Vibrations of an Elastically-Mounted Circular Cylinder beneath a Free Surface [Volume 50, Issue 4, 2018, Pages 727-740]
  • Hossein Farrash, Seyed Mahdi Effect of adding carbon nanotubes into the matrix material on the buckling behavior of glass/epoxy composite plates: An experimental study [Volume 53, Issue 4 (Special Issue), 2021, Pages 2613-2628]
  • Hossein Farrash, Seyed Mahdi An experimental investigation of the effect of the type of nanostructured reinforcements on the mechanical and tribological properties of epoxy based nanocomposites [Volume 53, Issue 6 (Special Issue), 2021, Pages 4009-4022]
  • Hosseini, Afshin Vibration and Stability Analysis of Micro-pipes Conveying Fluid under Magnetic, Electric, and Thermal Fields [Volume 54, Issue 8, 2022, Pages 1803-1832]
  • Hosseini, M. Using Green Function Method to Dynamic Analysis of Nanotubes Conveying Fluid Under Moving Load [Volume 50, Issue 1, 2018, Pages 137-150]
  • Hosseini, Majid Micromechanical failure analysis and tensile behavior of dual phase steel using 2D and 3D RVEs [Volume 51, Issue 3, 2019, Pages 21-30]
  • Hosseini, Mohammad Natural Frequency Analysis of Rotating Thin-Walled Beams with Embedded Shape Memory Alloy Wires Subjected to Uniform Temperature Field [Volume 52, Issue 1, 2020, Pages 127-140]
  • Hosseini, Mohammad Vibration and Stability Analysis of Micro-pipes Conveying Fluid under Magnetic, Electric, and Thermal Fields [Volume 54, Issue 8, 2022, Pages 1803-1832]
  • Hosseini, mojtaba Impact of Flow around Annular Fins on their Thermal Stresses and Strains [Volume 52, Issue 1, 2020, Pages 203-220]
  • Hosseini, R. Mathematical Modelling and Resonance Analysis in Impact Oscillators [Volume 51, Issue 1, 2019, Pages 157-168]
  • Hosseini, Reza Solution of Radiative Transfer Equation in Two-Dimensional Media with Real Gas through Zone Method and Box Model [Volume 41, Issue 2, 2010, Pages 11-20]
  • Hosseini, Rouhollah Experimental and Numerical Investigation of Width Reduction Effect on the Output Power of Piezoelectric Energy Harvester Beam [Volume 52, Issue 5, 2020, Pages 1257-1272]
  • Hosseini, Rouhollah Experimental and Numerical Investigation into the Effect of Core Density on the Energy Absorption of Sandwich Panels with Aluminum Face Sheets and Polyurethane Foam Core [Volume 52, Issue 10, 2021, Pages 2839-2858]
  • Hosseini, saied jalil Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
  • Hosseini, Seyed Ali Asghar Vibrations Analysis of a Rotor Supported by Tilting-Pad Journal Bearings with Considering of Geometric Nonlinearity [Volume 52, Issue 1, 2020, Pages 141-154]
  • Hosseini, Seyed Amirreza The Effect of Surface Types on Bubble Dynamic Formation During Nucleate Pool Boiling by Use of Lee and Tanasawa Phase Change Models [Volume 52, Issue 9, 2020, Pages 2521-2536]
  • Hosseini, Seyed Sharafoddin Experimental Study of Thermal and Mechanical Properties of Wood Boards Processed with Hard Recycled Skin of Walnut and Pistachio [Volume 54, Issue 8, 2022, Pages 1933-1944]
  • Hosseini, Seyed Vahid Experimental Determination of the Modified Drucker-Prager Cap Constitutive Model for 92 Percent Alumina Powder [Volume 52, Issue 10, 2021, Pages 2725-2740]
  • Hosseini, Seyyed Amirhosein Free vibration of axially functionally graded nanobeam with an attached mass based on nonlocal strain gradient theory via new ADM numerical method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1159-1178]
  • Hosseini, Shahram Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method [Volume 53, Issue 4, 2021, Pages 2331-2346]
  • Hosseini, S.M. A. Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
  • Hosseini Abadshapoori, M. Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
  • Hosseini Abardeh, Reza Numerical Investigation of a Pulse-Jet Filter Cleaning System Performance [Volume 51, Issue 6, 2020, Pages 1455-1468]
  • Hosseini Chaleshtari, Shahram Modeling of hyperelastic incompressible behavior of functionally graded material under bending load [Volume 52, Issue 8, 2020, Pages 2045-2062]
  • Hosseini Mansoub, Farid Analysis of Forming Limit of Sheet Metals Considering Vertex Localized Necking and Ductile Damage Criterion [Volume 53, Issue 2 (Special Issue), 2021, Pages 1307-1320]
  • Hosseini Monazzah, Asal Corrosion and Vibration: Effective Factors on Orientation Changes of Porous Phase in Grey Cast Iron [Volume 52, Issue 3, 2020, Pages 703-716]
  • Hosseini Monazzah, Asal Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method [Volume 52, Issue 10, 2021, Pages 2759-2778]
  • Hosseini Poor, Seyed Jamal The Study of Effective Process Parameters in the Warm Sheet Hydroforming [Volume 51, Issue 5, 2019, Pages 1057-1068]
  • Hosseinipour, J. Fabrication of Bipolar Plates of the Fuel Cell from Stainless Steel 304 by Hot Metal Gas Forming Process [Volume 50, Issue 3, 2018, Pages 589-600]
  • Hosseinipour, Seyed Jamal Experimental Study and Finite Element Simulation for Determining the Forming Window of 6063-O Aluminum Tube in Warm Hydroforming Process [Volume 52, Issue 3, 2020, Pages 571-586]
  • Hosseini Salari, Ali Online Estimation of Tire Normal Force with Applying Hardware-Software Couple Model [Volume 54, Issue 2, 2022, Pages 333-356]
  • Hosseini Salari, Ali Optimal cooperative braking strategy design of regenerative and mechanical braking systems for in-wheel drive electric vehicles [Volume 55, Issue 4, 2023, Pages 433-460]
  • Hosseini Sani, Seyyed Kamal Spacecraft Fault Tolerant Attitude Control Design under Control Input Saturation and Uncertainty in Fault Information [Volume 48, Issue 2, 2016, Pages 115-124]
  • Hosseini Toudeshky, H. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
  • Hosseini-Toudeshky, Hossein Micromechanical failure analysis and tensile behavior of dual phase steel using 2D and 3D RVEs [Volume 51, Issue 3, 2019, Pages 21-30]
  • Hosseini-Toudeshky, Hossein Micro-Mechanical Damage Analysis of Al-TiC Particulate Reinforced Composites by Peridynamic Theory [Volume 53, Issue 8, 2021, Pages 4701-4716]
  • Hosseini Vajargah, Nima Numerical Simulation of Film Cooling around a Gas Turbine Blade via Partially Averaged Navier-Stokes Approach (PANS) [Volume 48, Issue 3, 2016, Pages 267-280]
  • Hosseinpour, javid Enhanced Extended State Observer Based on Trajectory Linearization Control for External and Internal Disturbances [Volume 54, Issue 6, 2022, Pages 1319-1340]
  • Hosseinpour, Seyed Mohammad The Study of Effective Process Parameters in the Warm Sheet Hydroforming [Volume 51, Issue 5, 2019, Pages 1057-1068]
  • Hosseinzadeh, M. An Analytical Model and Numerical Simulations to Predict Process Parameters in the Tube Bending Under Internal Fluid Pressure [Volume 50, Issue 3, 2018, Pages 447-466]
  • Hosseinzadeh Esfahani, Farid Characterization of the Effect of Helicopter Isolated Blade Vortex on Dynamic Stall [Volume 54, Issue 1, 2022, Pages 75-100]
  • Houshfar, Ehsan Investigation on the effect of addition of nano-titanium oxide particles to phase change material in a hybrid system for battery cooling under constant heat flux [Volume 53, Issue 7, 2021, Pages 4379-4396]
  • Hoveida Marashi, Seyed Pirouz Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718 [Volume 52, Issue 10, 2021, Pages 2629-2646]

I

  • Imani, A. A C1 Finite Element Formulation for Mindlin-Reissner Microplate Model [Volume 51, Issue 1, 2019, Pages 3-18]
  • Imani, H. An Experimental Comparison of Dimensional and Geometrical Tolerances in Milled Holes on AISI D2 Steel [Volume 50, Issue 3, 2018, Pages 671-680]
  • Irani, Mohsen Thermal Analysis of a Solar Wall Equipped to Nano Phase Change Material [Volume 51, Issue 4, 2019, Pages 131-140]
  • Irani, Saeid Investigation of Nonlinear Vibrations of A Cantilever Beam with A Transverse Fatigue Crack [Volume 53, Issue 10, 2022, Pages 5069-5084]
  • Irani Rahghi, Mohsen Reinforcement learning-based controller design for a ‎proposed octorotor with tilt-arm angles ‎ [Volume 55, Issue 10, 2024, Pages 1175-1194]
  • Iranmanesh, Mahdi Finite Element Simulation and Experimental Verification of HAZ Softening during Welding of Aluminum alloy 7075 [Volume 55, Issue 8, 2023, Pages 1009-1020]
  • Isapour Rudy, Mohammad Statistical Analysis and Optimization of Variables Affecting the End Diameter of AISI 304 Steel Tube Produced by Flaring Process [Volume 54, Issue 12, 2023, Pages 2861-2876]
  • Ivakpour, Javad Synthesis of Optimal Heat-Integrated Distillation Columns Sequence with Mathematical Programming method based on Superstructure Optimization [Volume 48, Issue 3, 2016, Pages 227-238]
  • Izadi, Iman Design of Three-dimensional Robust Guidance Law Using Adaptive Dynamic Programming with Input Saturation Constraint [Volume 52, Issue 12, 2021, Pages 3411-3424]
  • Izadi, Omid Experimental and Simulation Study on the Warpage of Polyamide 6 Based on Thermo Mechanical Behavior of Material Using Uniaxial Tensile Test [Volume 52, Issue 5, 2020, Pages 1127-1138]
  • Izadifard, Mohammad Hossein Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Izadpanah, E. Numerical Study on the Vortex-induced Vibration of Circular Cylinder [Volume 51, Issue 2, 2019, Pages 455-470]
  • Izadpanah, Ehsan Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Izadpanah, Ehsan Numerical investigation of fluid-structure interaction of a detached flexible plate behind a circular cylinder [Volume 55, Issue 7, 2023, Pages 819-836]

J

  • Jaafarian Kafshgary, Naghmeh Fault Detection of journal bearings and Simulation of Major Occurred Fault using Failure Mode and Effect Analysis Method to Evaluate its Effects [Volume 53, Issue 8, 2021, Pages 4581-4594]
  • Jaamialahmadi, A. Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2018, Pages 829-838]
  • Jaamialahmadi, Abdolrahman Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Jabbari, Fatemeh Investigation Dynamic Viscosity of Water-Single Wall Carbon Nanotube Nanofluid and Its Effective Factors By Molecular Dynamics Simulation [Volume 51, Issue 4, 2019, Pages 91-100]
  • Jabbari, M. Electro-mechanical Analysis of Rotating Cylinder Made of Functionally Graded Piezoelectric Materials: Sensor and Actuator [Volume 51, Issue 1, 2019, Pages 215-224]
  • Jabbari, mohammad Mehdi Experimental Investigation into Sound transmission Loss through Concrete Containing Recycled Rubber [Volume 51, Issue 3, 2019, Pages 131-140]
  • Jabbari, Mohsen The Effect of Graphene Nanoparticles on the Strength of the Sandwich Panel Structure Inspired by the Dragonfly Wing Vein Microstructure under Quasi-Static Loading [Volume 54, Issue 12, 2023, Pages 2821-2842]
  • Jaberi, Amin Rectangular liquid jets injected transversely into subsonic crossflow [Volume 53, Issue 5 (Special Issue), 2021, Pages 3117-3134]
  • Jaberi, Amin Experimental Investigation of a High Aspect Ratio Rectangular Liquid Jet in Parallel Airflow [Volume 53, Issue 11, 2022, Pages 5429-5444]
  • Jadidi, Amir Mohammad Investigating the Effects of Loung Chair Fire in a Cinema Hall Using Displacement, Impingement Jet and Stratum Ventilation Systems [Volume 53, Issue 11, 2022, Pages 5573-5594]
  • Jafari, Ali Asghar Analysis of Free Vibration of Sandwich Panels Based on Improved High-order Sandwich Panel Theory [Volume 43, Issue 2, 2012, Pages 27-33]
  • Jafari, Azadeh Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Jafari, Davod Coordination of Production/ Order Policy for a Single Vendor Single Buyer chain with stochastic demand [Volume 41, Issue 1, 2010, Pages 77-86]
  • Jafari, Hamid Investigation of wave propagation in architected uniform triangle mass center fractal nano-bio-filters based on microtubules [Volume 53, Issue 6 (Special Issue), 2021, Pages 3939-3952]
  • Jafari, Mohammad An experimental investigation of the effect of the type of nanostructured reinforcements on the mechanical and tribological properties of epoxy based nanocomposites [Volume 53, Issue 6 (Special Issue), 2021, Pages 4009-4022]
  • Jafari, Moharram Experimental Study of the Effects of Fluid Physical Properties on Conduction Pump Performance [Volume 52, Issue 4, 2020, Pages 881-892]
  • Jafari, Moharram Thermodynamic Analysis of Power Generation System Based on Solid Oxide Fuel Cell With External Reforming [Volume 53, Issue 1 (Special Issue), 2021, Pages 605-622]
  • Jafari, Moharram Experimental Study of the Effects of Fluid Physical Properties and Working Temperature on Heat Transfer in Conduction Pump [Volume 53, Issue 3, 2021, Pages 1607-1620]
  • Jafarian, Ali Study of the Natural Circulation Heat Recovery Steam Generator Unsteady Behavior Using One Dimensional Model for the Evaporator Loop [Volume 52, Issue 9, 2020, Pages 2369-2386]
  • Jafari Beinabaj, Alireza Numerical modeling of magnetic field effects on flame shape, temperature and CO2, CO and NO emission of laminar diffusion combustion of methane [Volume 51, Issue 4, 2019, Pages 81-90]
  • Jafari Nedoushan, Reza Design and analysis of mechanical behavior of a novel lattice auxetic structure based on rigid rotating mechanism [Volume 55, Issue 2, 2023, Pages 179-192]
  • Jafari-Talookolaei, R.-A. Free Vibration Analysis of Delaminated Beam with Stochastic Parameters [Volume 49, Issue 4, 2018, Pages 731-742]
  • Jafari Vardanjani, M. Shunting Effect in Resistance Spot Welded Joints of Aluminum Alloys [Volume 50, Issue 3, 2018, Pages 561-576]
  • Jafari Vardanjani, Mehdi Experimental and Analytical Evaluation of the Vibrational Stress Relief Process Parameters on the Steel Specimen Based on the Computational Model [(Articles in Press)]
  • Jafari Vidoji, Farshad Finite Element Simulation of the Trailing Heat Sink's Effect on Welding-Induced Distortion of Al 3105 [Volume 54, Issue 8, 2022, Pages 1945-1968]
  • Jafarkalhori, Yeganeh Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
  • Jafarkazemi, Farzad Theoretical comparison of thermal and electrical performance of different models of sheet and tube type solar photovoltaic - thermal water collector [Volume 53, Issue 5, 2021, Pages 2903-2920]
  • Jafarmadar, Samad Parametric Analysis and Optimization of a Trigeneration System Based on the Tubular Solid Oxide Fuel Cell [Volume 52, Issue 2, 2020, Pages 399-418]
  • Jafarmadar, Samad The Thermodynamic Analysis of New Combined Cycle Using Sabalan Geothermal Wells and Liquefied Natural Gas Cold EnergyThe Thermodynamic Analysis of New Combined Cycle Using Sabalan Geothermal Wells and Liquefied Natural Gas Cold Energy [Volume 52, Issue 6, 2020, Pages 1413-1428]
  • Jafarmadar, Samad Exergoeconomic Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with External Reformer and Dimethyl Ether [Volume 52, Issue 6, 2020, Pages 1463-1478]
  • Jafarmadar, Samad Numerical Simulation of Flow, Natural Convection and Distribution of Nano Particles inside Trapezoidal Cavity using Buongiorno’s Model [Volume 52, Issue 9, 2020, Pages 2537-2550]
  • Jafarmadar, Samad Thermo-Economic Evaluation of a Power and Freshwater Production System Including a Liquid Metal Magnetohydrodynamic Unit Driven By a Concentrated Solar Tower and Biogas [Volume 53, Issue 11, 2022, Pages 5551-5572]
  • Jafar Yegane, Hamid Reza Analysis of Damaged Ship Behavior in Sea Waves [Volume 44, Issue 1, 2012, Pages 79-90]
  • Jahanbakhshi, Akram Effects of Magnetic Field on Natural Convection of Non-Newtonian Fluid in a Square Enclosure with a Central Heat Source [Volume 53, Issue 1, 2021, Pages 259-278]
  • Jahangirian, Alireza A numerical investigation on the effect of blade tip shapes on power generation of a horizontal axis wind turbine [Volume 53, Issue 5, 2021, Pages 2791-2806]
  • Jahani, H. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
  • Jahanian, O. Defining Start and Duration of Combustion in HCCI Engines using Mean-Value Method for Control Applications [Volume 50, Issue 6, 2019, Pages 1265-1276]
  • Jahannama, M.R. Numerical Simulation of Drop Deformation and Breakup in an Electric Field [Volume 50, Issue 4, 2018, Pages 767-784]
  • Jahanshahi Javaran, E. Performance Optimization of Multi-Effect Distillation-Thermal Vapor Compression Desalination Using Genetic Algorithm [Volume 50, Issue 2, 2018, Pages 399-412]
  • Jahanshahi Javaran, E. Design, Manufacturing and Performance Evaluation of a Fixed Focus Scheffler Concentrator in Kerman [Volume 50, Issue 6, 2019, Pages 1303-1318]
  • Jahanshahi Javaran, ٍEbrahim Thermodynamic and Thermo-Economic Analysis of the Absorption Heat Transformer, Organic Rankine Cycle, and Reverse Osmosis Desalination Combined System [Volume 53, Issue 1 (Special Issue), 2021, Pages 639-654]
  • Jahan Tigh, Nabi The Optimization of Heat Transfer Distribution in a Heated Room Using Convective Thermal Panels for Achievement of Thermal Comfort [Volume 45, Issue 1, 2013, Pages 63-73]
  • Jahromi, M. The Design of a New Rotary Flow Control Valve with a Pressure Compensator for a Turbojet Engine [Volume 50, Issue 2, 2018, Pages 413-424]
  • Jalali Aghchai, Abdolhossein Electroplastic friction stir spot welding for joining AA6061-T6 aluminum to galvanized DP590 steel [Volume 53, Issue 6, 2021, Pages 3733-3750]
  • Jalalian Sedaghati, Shima Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless Steel Materials [Volume 52, Issue 4, 2020, Pages 1055-1076]
  • Jalali Mehrabad, R. Effects of Adding Gaseous Soot and Methane Incomplete Combustion Products on Detailed Chemical Kinetics Combustion of Methane and Pollutants [Volume 50, Issue 6, 2019, Pages 1277-1288]
  • Jalaly, Maisam A Study on the Ballistic Behavior of Kevlar Fabric Impregnated with Shear Thickening Fluid Containing Graphene Oxide Additive [Volume 53, Issue 12, 2022, Pages 5725-5738]
  • Jalili, Farhad Introduction of an improved Harmony Search Optimization Algorithm for investigating of Airfoil Parameterization Methods and Aerodynamics optimization [Volume 47, Issue 1, 2015, Pages 13-31]
  • Jalili, M. Nonlinear Longitudinal Free Vibration of a Rod Undergoing Finite Strain [Volume 50, Issue 5, 2019, Pages 1085-1096]
  • Jalili, M. M. Computation of Permissible Perturbations in Dynamic Parameters of an Articulated Vehicle to Maintain Stability [Volume 49, Issue 2, 2017, Pages 351-362]
  • Jalili Bahabadi, Mohammad Mahdi Simultaneous Optimization of a Convex Sole as a Foot and Hip Trajectory for a Biped Robot with an Ankle without an Additional Degree of Freedom [Volume 52, Issue 12, 2021, Pages 3383-3396]
  • Jalili Bahabadi, Mohammad Mahdi Simulation and optimization of surface roughness and cutting force in dynamic ploughing process of single crystal copper using molecular dynamics method [Volume 55, Issue 12, 2024, Pages 3-3]
  • Jamaati, J. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
  • Jamali, Ali Designing Optimum Multi-Domain System by Integrating Bond Graph and Genetic Programming [Volume 53, Issue 2, 2021, Pages 1015-1038]
  • Jamali, Ali Single and Multi-objective Optimal Control Design by Genetic Programming and Comparison with Riccati Equation Solutions [Volume 52, Issue 12, 2021, Pages 3369-3382]
  • Jamali, Ali Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
  • Jamali, Ali Investigating noise reduction in signal analysis in rotary machines fault diagnosing by neural network [Volume 55, Issue 12, 2024, Pages 2-2]
  • Jamali, Mohammad Jafar Optimal Design of Laminated Sandwich Panels Constrained with Local Bucklings Subjected to Out-of-Plane Load, Using Advanced Genetic Algorithm [Volume 42, Issue 1, 2011, Pages 37-44]
  • Jamekhorshid, Ahmad An Experimental Investigation of Convective Heat Transfer of Slurry Phase Change Material in a Tube with Butterfly Tube Inserts [Volume 52, Issue 6, 2020, Pages 1561-1576]
  • Jamesahar, E. Natural Convection Heat Transfer Inside a Square Enclosure with a Flexible Fin [Volume 50, Issue 2, 2018, Pages 233-254]
  • Jamialahmadi, Amir Ahmad Experimental study of CuO/Water nanofluid pool boiling on the copper flat surface and measurement of the critical heat flux [Volume 53, Issue 5, 2021, Pages 3099-3114]
  • Jamshideasli, D. Thermal Lattice Boltzmann Method for Curved Boundaries in the Transition Regime [Volume 49, Issue 3, 2017, Pages 617-624]
  • Jamshidi, HAMED Effect of friction stir welding parameters on mechanical properties of aluminum alloy to austenitic stainless steel lap joint [Volume 46, Issue 2, 2015, Pages 35-43]
  • Jamshidi, Kamal A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Jamshidi, Reza Meshless Method for Numerical Solution of Internal Flows with Axial Symmetry [Volume 55, Issue 3, 2023, Pages 285-302]
  • Jamshidian, Mostafa A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems [Volume 52, Issue 7, 2020, Pages 1905-1924]
  • Jamshidi Aval, H. Fabrication of Bipolar Plates of the Fuel Cell from Stainless Steel 304 by Hot Metal Gas Forming Process [Volume 50, Issue 3, 2018, Pages 589-600]
  • Jamshidi moghadam, Peyman Numerical and Experimental Free Vibration Analysis of Post-buckled Beam [Volume 47, Issue 2, 2016, Pages 73-84]
  • Javadi, Aliyar Simulation of a Photocatalytic Reactor Using Finite Volume and Discrete Ordinate Method: A Parametric Study [Volume 53, Issue 1 (Special Issue), 2021, Pages 573-588]
  • Javadi, Masoud Flutter reliability analysis of laminated composite plates [Volume 53, Issue 6 (Special Issue), 2021, Pages 3925-3938]
  • Javadi, Merdad The Effect of Graphene Nanoparticles on the Strength of the Sandwich Panel Structure Inspired by the Dragonfly Wing Vein Microstructure under Quasi-Static Loading [Volume 54, Issue 12, 2023, Pages 2821-2842]
  • Javadi, Saeed Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Javadi, Seyed Mohammad Numerical and Experimental Investigation of Non-Newtonian High Viscosity Flow Field in Multi Materials Extrusion Process [Volume 51, Issue 6, 2020, Pages 1363-1380]
  • Javadi, Seyed Mohammad Numerical study and investigation of the effect of magnetic field on fluid hydrodynamic behavior [Volume 53, Issue 5, 2021, Pages 2857-2868]
  • Javadian, Hossein Investigation of Vibration Behavior and Crack Detection of a Cracked Short Cantilever Beam under the Axial Load [Volume 47, Issue 2, 2016, Pages 1-12]
  • JavadPoor, S. M. Experimental Investigation of the Bubbly Drag Reduction in the Presence of Axial Flow in a the Couette-Taylor System [Volume 47, Issue 1, 2015, Pages 33-45]
  • Javaherdeh, Kourosh Investigating the Performance of a Hybrid Desiccant Cooling System and Trombe Wall and Optimizing Wall Area in a Stable Condition [Volume 52, Issue 11, 2021, Pages 3289-3306]
  • Javaherdeh, Kourosh Numerical and Experimental Analysis for Fluid Flow Inside Corrugated Tube quipped with Twisted Tapes [Volume 51, Issue 6, 2020, Pages 1339-1362]
  • Javaherdeh, Kourosh A Novel Biomass-Driven Cogeneration System for Zero-Energy Buildings [Volume 52, Issue 6, 2020, Pages 1443-1462]
  • Javaherdeh, Kourosh Numerical Simulation of Heat Transfer Turbulent Flow for Non-Newtonian Nanofluid in a Double Pipe Helical Heat Exchanger [Volume 53, Issue 1, 2021, Pages 221-240]
  • Javaherdeh, Kourosh Thermodynamic and Exergy Economic Analysis Combined Heat Power and Cooling in a Combined Cycle with Ejector Using Solar Energy [Volume 54, Issue 3, 2022, Pages 547-566]
  • Javanbakht, Mahdi Nanovoid dynamics based on temperature dependent Young modulus and void formation energy in Nickel: a phase field study [Volume 52, Issue 12, 2021, Pages 3521-3532]
  • JavanNezhad, Reza Diagnostical and observational analysis of clear air turbulence over the middle east and Iran [Volume 53, Issue 7, 2021, Pages 4203-4220]
  • Jazayeri, Seyed Ali Simulation of diesel engine in closed cycle direct spraying with the help of a ahtraghi of area 6Closed Cycle Simulation of DI Diesel Engine with Six Zone Combustion Model [Volume 45, Issue 1, 2013, Pages 109-123]
  • Jirofti, Nafiseh Study of Young’s Modulus and Failure Strength of Polyurethane-Based Binary Polymer Composite Structures Based on Stress-Strain Curve for Tissue Engineering Vascular Graft Application [Volume 52, Issue 12, 2021, Pages 3567-3582]
  • Jodat, Amin An Experimental Assessment on the Effects of Forced, Free and Mixed Convection Regimes on the Water Evaporation Rate in Surface Gravity Waves [Volume 52, Issue 2, 2020, Pages 453-464]
  • Jodat, Amin Experimental Study of Injecting Water Vapor and Oil Compounds by Nebulizer on the Efficiency and Natural Gas Flame Pollution [Volume 53, Issue 1, 2021, Pages 31-40]
  • Jokar, Royaa Fractional order adaptive fuzzy terminal sliding mode controller design for a knee joint orthosis [Volume 51, Issue 3, 2019, Pages 151-160]
  • Jozvaziri, Mohammad Ali Investigation of the Aerodynamic Design Effect on Point Mass Flight Parameters in Hypersonic Glider [Volume 54, Issue 3, 2022, Pages 649-670]
  • Jozvaziri, Mohammad Ali Aerodynamic Design of a Hypersonic Glide Vehicle Based on the Cone-Derived Wave rider Configuration Method [Volume 55, Issue 7, 2023, Pages 797-818]

K

  • Kabganian, M. Designing an Adaptive Control Algorithm for Amirkabir’s Laboratory Attitude Simulator of a Spacecraft [Volume 50, Issue 1, 2018, Pages 163-174]
  • Kabganian, Mansour Suggestion and Modeling of a Novel Capsular Microrobot with Surface Forces [Volume 42, Issue 3, 2011, Pages 1-8]
  • Kadkhodapour, Javad Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Kadkhodapour, Javad Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Kadkhodayan, Mehran A Numerical and Experimental Study on Bending of Glass Fiber Metal Laminate Composite for Reducing Resultant Defects [Volume 47, Issue 2, 2016, Pages 13-22]
  • Kadkhodayan, Mehran Theoretical Analysis of Equal Channel Angular Pressing Process by Upper Bound Method and Its Experimental Investigation in Condition of Circular Cross-Section Channel [Volume 53, Issue 8, 2021, Pages 4729-4744]
  • Kahhal, Parviz An Experimental Investigation on Tensile and Impact Properties of Bagasse/Polypropylene Natural Composite [Volume 52, Issue 8, 2020, Pages 2149-2160]
  • Kakaee, َAmir Hosein Thermo-mechanical Analysis of SI Engine Piston using Concise Wall Temperature Model [Volume 43, Issue 1, 2012, Pages 19-30]
  • Kakavand, Farshad Buckling Analysis of Truncated Conical Sandwich Panel with Porous Functionally Graded Core in Different Thermal Conditions [Volume 52, Issue 10, 2021, Pages 2859-2878]
  • Kalhor, Ahmad Solving the Forward Kinematic Problem of Under-Constrained Cable Driven Robots for Online Control Purposes [Volume 52, Issue 1, 2020, Pages 43-56]
  • Kalteh, M. Semi-Analytic Solution of Nanofluid and Magnetic Field Effects on Heat Transfer from a Porous Wall [Volume 49, Issue 1, 2017, Pages 161-170]
  • Kalteh, M. Investigation of the Effect of Velocity Slip and Temperature Jump on the Heat Transfer of Nanofluid in a Microchannel Under Constant Heat Flux with Lattice Boltzmann Method [Volume 50, Issue 2, 2018, Pages 255-270]
  • KamalGharibi, Mahdi Experimental Study of the Stability of Deionized Water Based Copper Oxide Nanofluid and Achievement to the Optimal Stability Conditions [Volume 48, Issue 1, 2016, Pages 17-30]
  • Kamali, Mohammad Taher A Semi-Analytical Method Based on the Mixed Formulation for the Elastic Analysis of a Crack in an Anisotropic Homogeneous Medium [Volume 51, Issue 5, 2019, Pages 1019-1130]
  • Kamali E., A. Design and Construction of an Electronic Tiltmeter Calibrator and Estimation of Calibration Uncertainty [Volume 50, Issue 5, 2019, Pages 1113-1122]
  • Kamali Moghadam, R. Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
  • Kamali Moghadam, R. Numerical Assessment of the Pulse Crossing Jet in Nozzle Fluidic Thrust Vectoring Using Unsteady Reynolds-Averaged Navier–Stokes Turbulence Approach [Volume 50, Issue 6, 2019, Pages 1185-1198]
  • Kamalinia, A. H. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
  • Kamari, Djavad Implementation of Continuous Blowing and Synthetic Jet Actuators to Control the Flow Separation over a Fully Stalled Airfoil [Volume 53, Issue 9, 2021, Pages 4847-4864]
  • Kamari, Majid Implementation of Neuro– Fuzzy and Multi-Layer Perceptron System Intelligent Techniques for Main Fault Diagnosis of Rotating Machinery [Volume 45, Issue 2, 2013, Pages 105-118]
  • Kamari, Mohammad Hussain Hybrid Position and Force Control for a Spherical Inverted Pendulum Connected to a Quadrotor in a Constrained Motion [Volume 54, Issue 10, 2023, Pages 2255-2276]
  • Kanooni, Amin Determining the optimal number of collector layers in fog water harvesting system [Volume 55, Issue 11, 2024, Pages 3-3]
  • Karafi, Mohammad Reza Planar Navigation Algorithm of Magnetic Dipole Microrobot by Three External Electromagnets [Volume 54, Issue 8, 2022, Pages 1789-1802]
  • Karamad, Hossien Prediction and Control of Chaos in Nonlinear Rectangular Micro-Plate on the Elastic Foundation [Volume 52, Issue 5, 2020, Pages 1285-1300]
  • Karami, Fatemeh Investigation of Power-Law Fluid Flow through a Two-Dimensional Microchannel Based on a Couple Stress Theory-Calculation of Characteristic Length [Volume 52, Issue 7, 2020, Pages 1707-1714]
  • Karami, Malihe Performance Analysis of a Building Heating System using Underground Source Heat Pump and Photovoltaic Thermal Collector [Volume 52, Issue 9, 2020, Pages 2403-2424]
  • Karami, Mohammad Effects Of SMA Wires Free Vibration Of Shape Memory Sandwich Panel [Volume 44, Issue 2, 2013, Pages 29-40]
  • Karami Mohammadi, Neda A Vehicle Control Algorithm For Stop-and-Go Cruise Control System [Volume 44, Issue 2, 2013, Pages 83-91]
  • Karbasforushha, Majid Thermodynamic Analysis Of Variation Of Opening Angles Of Continuous Variable Valve Timing System [Volume 42, Issue 2, 2011, Pages 1-8]
  • Karbasizadeh, Nima Solving the Forward Kinematic Problem of Under-Constrained Cable Driven Robots for Online Control Purposes [Volume 52, Issue 1, 2020, Pages 43-56]
  • Kardan, Mansour Dynamic Response of Sandwich Panels with Flexible Cores and Elastic Foundation Subjected to Low-Velocity Impact [Volume 45, Issue 2, 2013, Pages 27-42]
  • Kargar Daroonkolaee, Mohammadreza Crystal Plasticity Finite Element Study of Necking Behavior of Aluminum Alloy Sheet Subject to Thickness-Stress [Volume 53, Issue 12, 2022, Pages 5755-5768]
  • Karim, Mohammad Hossein Economic evaluation of fixed and floating desalination plants on the shores of Makran [Volume 55, Issue 9, 2023, Pages 1045-1062]
  • Karimaei, Hadiseh Numerical Study of Catalyst Bed Performance of a Monopropellant Thruster Under Influence of Porosity Coefficient [Volume 54, Issue 7, 2022, Pages 1607-1622]
  • Kariman, M. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
  • Karimi, Amirhossein Numerical investigation of the effect of DBD plasma actuator on performance enhancement of an air-solid particle cyclone separator [Volume 55, Issue 9, 2023, Pages 1135-1156]
  • Karimi, Behroz New Lower Bounds for the Optimal Makespan on a Single Batch Processing Machine [Volume 43, Issue 2, 2012, Pages 75-84]
  • Karimi, Jalal Design of Fault Tolerant Controller in Flight Control System [Volume 54, Issue 10, 2023, Pages 2297-2314]
  • Karimi, Mahmoud A Collision-Free Trajectory Planning of a hyper redundant Manipulator Using a Dual Genetic Algorithm [Volume 41, Issue 1, 2010, Pages 39-47]
  • Karimi, meysam Effect of Graphene Sheets Aggregation on The Dislocation-Blocking Mechanism of Nanolaminated Aluminum/Graphene Composite: Molecular Dynamics Simulation Study [Volume 53, Issue 8, 2021, Pages 4649-4664]
  • Karimi, Mohammad Investigating the Effect of Mesh Structure and Mesh Retaining Module on the Rate of Fog Harvesting [Volume 54, Issue 7, 2022, Pages 1575-1586]
  • Karimi, Moien Performance Analyzing of an Inverted Absorber Basin Solar Still Equipped with Photovoltaic Cells [Volume 52, Issue 2, 2020, Pages 297-310]
  • Karimi, Safoora The Drag Coefficient Prediction of a Rising Bubble through a Non-Newtonian Fluid [Volume 52, Issue 4, 2020, Pages 863-880]
  • Karimi, Sina Superharmonic and Subharmonic Resonance Analysis of A Rectangular Hyperelastic Membrane Resting on Nonlinear Elastic Foundation Using The Method of Multiple Scales [Volume 53, Issue 8, 2021, Pages 4535-4564]
  • Karimian, Seyed Mohammad Hossein Characterization of the Effect of Helicopter Isolated Blade Vortex on Dynamic Stall [Volume 54, Issue 1, 2022, Pages 75-100]
  • Karimian, S.M.H Aerodynamic Performance Improvement of Hybrid Darrieus-Savonius Vertical Axis Wind Turbine [Volume 52, Issue 7, 2020, Pages 1865-1884]
  • Karimian, S.M.H Aerodynamic Performance Investigation of a Vertical Axis Wind Turbine Instead of Conventional Ram Air Turbines of Airplane [Volume 52, Issue 11, 2021, Pages 2985-3000]
  • Karimian Aliabadi, Hamed Frequency Domain Analysis of Water Hammer with Fluid-Structure Interaction in Viscoelastic pipe [Volume 52, Issue 4, 2020, Pages 985-1004]
  • Karimian Aliabadi, Saeed The Study of the Effect of Floating Platform Rotational Disturbance on theAerodynamic Performance of Offshore Wind Turbine in the Presence of Pitch Control System [Volume 52, Issue 4, 2020, Pages 769-784]
  • Karimi Khoozani, M. Determination of Critical Speeds and Divergence Instability Boundary for a High- Speed Double- Helical Planetary Gear System [Volume 51, Issue 1, 2019, Pages 180-186]
  • Karimi Rastehkenari, Zohreh Denoising vibration signals of rotating machines using probability density function, similarity measure and improved thresholding function [Volume 53, Issue 4 (Special Issue), 2021, Pages 2493-2512]
  • Karimnejad, Sajjad Analytical Solution of Heat Transfer in a Cone Made of Functionally Graded Material [Volume 53, Issue 1 (Special Issue), 2021, Pages 539-552]
  • KARIMPOUR, morad Effect of 3D-Printing and Compression Molding on Anisotropy of Acrylonitrile Butadiene Styrene Micro Specimen: A Comparative Study Based on Digital Image Correlation [Volume 53, Issue 12, 2022, Pages 5645-5658]
  • Karkon, Mohammad Mixed Finite Element Formulation for 2D Problems Analysis Based on Analytical Solutions of Deferential Equation [Volume 54, Issue 6, 2022, Pages 1443-1458]
  • Karsaz, Ali Design of a Hybrid Adaptive Neuro-Fuzzy Inference System Proportional–Integral– Derivative Controller for Vibration Mitigation of a Structure against Earthquake [Volume 52, Issue 8, 2020, Pages 2293-2316]
  • Kasaei, Mohammadmehdi An investigation on bend curve in the transition zone on web warping of channels with variable width in the flexible roll forming process [Volume 48, Issue 4, 2017, Pages 423-434]
  • Kashaniasl, Shahram Experimental study on the enhancement of the thermal efficiency of a household gas water heater [Volume 53, Issue 3 (Special Issue), 2021, Pages 2013-2030]
  • Kashaniasl, Shahram Numerical Study on the Enhancement of the Thermal Efficiency of a Household Gas Water Heater and Verification with Experimental Results [Volume 54, Issue 5, 2022, Pages 1199-1220]
  • Kashfi, Mohammad An Experimental Investigation on Tensile and Impact Properties of Bagasse/Polypropylene Natural Composite [Volume 52, Issue 8, 2020, Pages 2149-2160]
  • Kashi, Mahdi Experimental Investigation and Visualization of Flow Boiling Heat Transfer in a Vertical Tube Containing Metal Porous Medium [Volume 52, Issue 6, 2020, Pages 1595-1612]
  • Kashi Parpinchi, Mohsen Optimization and Thermodynamic Analysis of the Dual Mixed Refrigerant Process of the Natural Gas Liquefaction [Volume 52, Issue 9, 2020, Pages 2357-2368]
  • Kashi Parpinchi, Mohsen Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Kasiri, Norollah Synthesis of Optimal Heat-Integrated Distillation Columns Sequence with Mathematical Programming method based on Superstructure Optimization [Volume 48, Issue 3, 2016, Pages 227-238]
  • Katanchi, Babak Investigation of Fatigue Crack Growth in Superelastic NiTi Alloy by Using Digital Image Correlation Method [Volume 52, Issue 5, 2020, Pages 1167-1178]
  • Kaveh, Reza Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Microchannel with Curved Stirrer by Lattice Boltzmann Method [Volume 52, Issue 11, 2021, Pages 3187-3202]
  • Kaviani, Farid Static Analysis of Bending, Stability, and Dynamic Analysis of Functionally Graded Plates by a Four-Variable Theory [Volume 45, Issue 2, 2013, Pages 11-25]
  • Kavousi Sisi, M. Dynamic Analysis of Asynchronous Low-Velocity Impacts on Laminated Composite Plate [Volume 50, Issue 1, 2018, Pages 47-62]
  • Kavyanpoor, Mobin Investigating Transverse Vibrations of Free-Free Beam on the Frictional Substrate and Validation with Test Results [Volume 45, Issue 2, 2013, Pages 43-51]
  • Kayhani, MH Experimental Study of Foam Generation in a Microfluidic Device [Volume 52, Issue 7, 2020, Pages 1729-1740]
  • Kayhani, M.H. Immersed Boundary–Thermal Lattice Boltzmann Method with Sharp Interface: Heat Transfer of Non-Newtonian Fluid over a Cylinder [Volume 47, Issue 1, 2015, Pages 69-80]
  • Kayhani, M.H. Simulation of Two Circular Particles Falling in Vertical Channel: Combination of Immersed Boundary Lattice Boltzmann Method and Discrete Element Method [Volume 51, Issue 2, 2019, Pages 313-328]
  • Kayhani, Mohammad Hasan Experimental Study of Premixed Methane-Air Flame Propagation in a Closed Duct with Porous Obstacle [Volume 52, Issue 11, 2021, Pages 3225-3240]
  • Kayhani, Mohammad Hasan Experimental study of CuO/Water nanofluid pool boiling on the copper flat surface and measurement of the critical heat flux [Volume 53, Issue 5, 2021, Pages 3099-3114]
  • Kayhani, Mohammad Hasan An Experimental Investigation of Multi-Phase Flow and the Effect of Fracture on Enhanced Oil Recovery in the Porous Medium [Volume 54, Issue 11, 2023, Pages 2499-2518]
  • Kayhani, Mohammad Hassan Manufacturing and Testing of an Optimized Magneto-Rheological Fluid and Modelling of a Twin Tube Magneto-Rheological Damper Using a Modified Non-Newtonian Model Using Analytical Quasi-Static, Analytical Unsteady, Numerical and Experimental Methods [Volume 53, Issue 3, 2021, Pages 1373-1400]
  • Kayhani, Mohammad Hassan Numerical Investigation on the Fluid Elasticity Effect in the Impact of Oblique Drop onto Liquid Film [Volume 54, Issue 1, 2022, Pages 3-30]
  • Kazemi, A. An Analytical Investigation into Effects of Fracture Dispersion Coefficients and Thermal Conductivity on Geothermally Fractured Reservoirs [Volume 50, Issue 2, 2018, Pages 359-368]
  • Kazemi, Mahdi Investigation of the effect of welding path on residual stresses and deformations in peripheral welding of steel pipe [Volume 53, Issue 4 (Special Issue), 2021, Pages 2735-2750]
  • Kazemi, Mahdi Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy [Volume 53, Issue 6, 2021, Pages 3751-3760]
  • Kazemi, Mohammad Experimental Investigation of Heat Transfer Enhancement by Acoustic Streaming in a Closed Cylindrical Enclosure [Volume 44, Issue 1, 2012, Pages 11-20]
  • Kazemi, Mohsen Improving the power coefficient of the Darrieus vertical axis wind turbine with the aid of morphing airfoils [Volume 53, Issue 5 (Special Issue), 2021, Pages 3227-3240]
  • Kazemi, Mohsen Improvement of aerodynamic coefficients of the airfoil with free form deformation with the aid of Artificial Neural Networks and Genetic Algorithm [Volume 53, Issue 7, 2021, Pages 4113-4132]
  • Kazemi, Mostafa Optimization of The Slotted Gurney-Flap Geometry Applied to NACA 0012 Airfoil for Aerodynamic Performance Improvement [Volume 53, Issue 11, 2022, Pages 5331-5348]
  • Kazemi, Seyed Saied Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature [Volume 52, Issue 1, 2020, Pages 265-278]
  • Kazemi, S. R. A Peridynamic Study on Crack Growth in Plates with Two Anti-symmetric Cracks under Various Tensile Velocities [Volume 51, Issue 1, 2019, Pages 43-52]
  • Kazemi Fard, Ahmad Investigation of the Effect of Spray Fuel Injection Pattern on Evaporation of Droplets in the Gas Turbine Pre-mixer [Volume 52, Issue 4, 2020, Pages 833-846]
  • Kazemi Mazandarani, Sayyed Rafi Multi-objective Genetic Algorithm Optimization of Natural Gas Pressure Drop Station Heaters Using the Entropy Generation Minimization Method [Volume 55, Issue 1, 2023, Pages 61-84]
  • Kazempoor1, Pejman Effect of Liner Material Model on Explosively Formed Projectiles (EFP) Simulation [Volume 41, Issue 2, 2010, Pages 21-28]
  • Kazemzadeh Hannani, S. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
  • Kazemzadeh-Parsi, Mohammad Javad Application of Nonconforming Quadtree Grids in the Finite Element Method [Volume 53, Issue 2, 2021, Pages 673-686]
  • Kazemzadeh-Parsi, Mohammad Javad Analytical Study on Effect of Loosening on Nonlinear Vibration Behavior of Bolted Joints [Volume 53, Issue 12, 2022, Pages 5739-5754]
  • Kazerooni, Mehrdad An Improved Failure Modes and Effects Analysis as a New Framework to perform the Function Analysis Phase of products in the Value Engineering [Volume 53, Issue 8, 2021, Pages 4665-4690]
  • Keramat, Alireza Frequency Domain Analysis of Water Hammer with Fluid-Structure Interaction in Viscoelastic pipe [Volume 52, Issue 4, 2020, Pages 985-1004]
  • Kermani, Ali M. Study of Mechanical-Biosystemic Complications of Mazut and New Methods to Reduce Pollutants in Iranshahr Power Plant [Volume 52, Issue 2, 2020, Pages 419-436]
  • Kermani, Mohammad J. A parametric investigation of two phase flow in the cathode side of polymer electrolyte membrane fuel cell [Volume 51, Issue 4, 2019, Pages 31-40]
  • Kermani, Mohammad J. Investigation of the Effect of Anode Fuel Contaminants on the Performance of Polymer Electrolyte Membrane Fuel Cell [Volume 52, Issue 2, 2020, Pages 381-398]
  • Kermani, Mohammad J. Experimental Investigation of the Influence of Polymer Electrolyte Membrane Fuel Cells Operating Conditions on Its Performance and Water Management [Volume 52, Issue 11, 2021, Pages 3257-3274]
  • Kermani, Mohammad J. Simulation, manufacturing and test of a transparent proton-exchange membrane fuel cell [Volume 53, Issue 3 (Special Issue), 2021, Pages 2031-2052]
  • Kermani, Mohammad J. Network Modeling to Investigate the Effect of Coupling the Transport Phenomena on Water Distribution in Gas Diffusion Layer [Volume 53, Issue 11, 2022, Pages 5505-5528]
  • Kermani, Mohammad J. Experimental Cathode-Anode Flooding Diagnosis of Polymer-Electrolyte Fuel Cell of Power under 300W Using Adaptive-Neuro-Fuzzy Method [Volume 54, Issue 3, 2022, Pages 615-628]
  • Kermani, Mohammad J. Numerical analysis of moist-air flow in converging-diverging nozzle with equilibrium and non-equilibrium thermodynamic models [Volume 55, Issue 9, 2023, Pages 1113-1134]
  • Kermani, mohammad Jafar Numerical Modelling of Transonic Two Phase Flow with Shock in Converging-Diverging NozzleDiverging Nozzle [Volume 45, Issue 1, 2013, Pages 15-27]
  • Keshavarz, M. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
  • Keshavarz, M. R. Experimental Study of Energy Absorption of Square Column under Multi-Indentation Loading [Volume 51, Issue 1, 2019, Pages 33-42]
  • Keshavarzpour, Hemad Nonlocal Analysis of Chaotic Vibration, Primary and Super-Harmonic Resonance of Single Walled Carbon Nanotube Considering Thermal Effects [Volume 52, Issue 1, 2020, Pages 233-248]
  • Keshavarz Valian, Ali The Optimization of Heat Transfer Distribution in a Heated Room Using Convective Thermal Panels for Achievement of Thermal Comfort [Volume 45, Issue 1, 2013, Pages 63-73]
  • Keshtkar, Mohammad Mehdi Thermoeconomic Analysis of a Variable Refrigerant Flow System [Volume 51, Issue 4, 2019, Pages 1-10]
  • Keshtkar, Mohammad Mehdi Thermodynamic Analysis of Refrigerants Pairs in Two Stages Cascade Vapor Compression Refrigeration Cycle for Cooling of Telecommunications Equipment with Volume Decreasing Approach [Volume 52, Issue 2, 2020, Pages 329-346]
  • Keshtkar, Mohammad Mehdi Investigating the effect of various working fluids in cascade refrigeration cycle integrated with thermal desalination system [Volume 55, Issue 9, 2023, Pages 1063-1088]
  • Keshtkar, M.R. Numerical Study of Turbulence in Diesel Spray Combustion Using Large Eddy Simulation [Volume 50, Issue 4, 2018, Pages 823-836]
  • Keyhani, M.H. Proposing Immersed Boundary-Lattice Boltzmann-Lattice Spring Algorithm for Simulation of 2-D Deformable Plate in Steady Flow [Volume 50, Issue 4, 2018, Pages 683-696]
  • Keymasi Khalaji, Ali Tracking control of quadrotors in the presence of obstacles based on potential field method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1095-1110]
  • Khadarahmi, Hossein Experimental and Numerical Investigation into the Effect of Core Density on the Energy Absorption of Sandwich Panels with Aluminum Face Sheets and Polyurethane Foam Core [Volume 52, Issue 10, 2021, Pages 2839-2858]
  • Khadayari, A. Design and Implementation of Intelligent Systems Detect the Driver’s Lack of Concentration [Volume 50, Issue 5, 2019, Pages 1145-1154]
  • Khadem, J. Study the Effects of Uniform Magnetic Fields and Pressures on the Concentration of Main Species of Methane Combustion [Volume 50, Issue 2, 2018, Pages 337-346]
  • Khadem, Javad Numerical modeling of magnetic field effects on flame shape, temperature and CO2, CO and NO emission of laminar diffusion combustion of methane [Volume 51, Issue 4, 2019, Pages 81-90]
  • Khadembashi, Mozhde Damping Modeling in Dual Axis Torsion Micro-Actuators Considering the Bending of the Supporting Beams [Volume 52, Issue 8, 2020, Pages 2161-2176]
  • Khademi, Saeed Numerical investigation of the effect of the porous coating layer on the heat transfer plate in the flow of impinging jet array [Volume 55, Issue 3, 2023, Pages 337-358]
  • Khajavi, M. N. Implementation of Neuro– Fuzzy and Multi-Layer Perceptron System Intelligent Techniques for Main Fault Diagnosis of Rotating Machinery [Volume 45, Issue 2, 2013, Pages 105-118]
  • Khajehdezfuly, Amin Effects of Position and Shape of Cutout on the Axial Buckling Load of Composite Cylindrical Panel [Volume 52, Issue 10, 2021, Pages 2879-2898]
  • Khajehzadeh, M. Experimental Investigation and Finite Difference Modeling of Cutting Tool Temperature Distribution During Ultrasonically Assisted Turning [Volume 50, Issue 3, 2018, Pages 657-670]
  • Khajehzadeh, Mohsen Optimization of Parameters Affecting Magnetic Abrasive Finishing Process Using Response Surface Method [Volume 52, Issue 10, 2021, Pages 2691-2708]
  • Khajehzadeh, Mohsen Experimental study of machining residual stresses in plasma-assisted turning process [Volume 53, Issue 4, 2021, Pages 2385-2406]
  • Khajehzadeh, Mohsen Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2022, Pages 5627-5644]
  • Khajehzadeh, Mohsen Experimental Study and Finite Element Simulation of Cutting Tool Temperature in Laser Assisted Machining [Volume 54, Issue 6, 2022, Pages 1341-1356]
  • Khalafi, Vahid Flutter reliability analysis of laminated composite plates [Volume 53, Issue 6 (Special Issue), 2021, Pages 3925-3938]
  • Khalati, Parvaneh Mathematical and Artificial Neural Network Simulation of NOx Selective Catalytic Reduction in a Monolithic Reactor [Volume 52, Issue 9, 2020, Pages 2465-2478]
  • Khalati, Parvaneh Removal of Lead Heavy Metal from Wastewater by Crystallization Process and Investigation of the Effective Parameters [Volume 53, Issue 11, 2022, Pages 5349-5366]
  • Khaledi, Hiwa Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing [Volume 52, Issue 4, 2020, Pages 797-812]
  • Khaleghi, H. Numerical Investigation of Water Management in the Cathode and Anode Sides of Proton Exchange Membrane Fuel Cell [Volume 51, Issue 2, 2019, Pages 227-248]
  • Khaleghi, H. Numerical Study of Turbulence in Diesel Spray Combustion Using Large Eddy Simulation [Volume 50, Issue 4, 2018, Pages 823-836]
  • Khaleghi, Hassan Investigation of the Effect of Spray Fuel Injection Pattern on Evaporation of Droplets in the Gas Turbine Pre-mixer [Volume 52, Issue 4, 2020, Pages 833-846]
  • Khaleghi, Hassan Numerical investigation of ethanol and acetone spray injection into gaseous environment [Volume 53, Issue 5 (Special Issue), 2021, Pages 3213-3226]
  • Khaleghi, Hosein Circumferential Casing Treatment in a Transonic Fan [Volume 53, Issue 7, 2021, Pages 4189-4202]
  • Khaleghi, Hossein A Theory for Predicting Stall Cell Transient Behavior [Volume 53, Issue 9, 2021, Pages 4773-4788]
  • Khalil-Allafi, Jafar Investigation of Fatigue Crack Growth in Superelastic NiTi Alloy by Using Digital Image Correlation Method [Volume 52, Issue 5, 2020, Pages 1167-1178]
  • Khalilarya, Shahram Parametric Analysis and Optimization of a Trigeneration System Based on the Tubular Solid Oxide Fuel Cell [Volume 52, Issue 2, 2020, Pages 399-418]
  • Khalilarya, Shahram The Thermodynamic Analysis of New Combined Cycle Using Sabalan Geothermal Wells and Liquefied Natural Gas Cold EnergyThe Thermodynamic Analysis of New Combined Cycle Using Sabalan Geothermal Wells and Liquefied Natural Gas Cold Energy [Volume 52, Issue 6, 2020, Pages 1413-1428]
  • Khalilarya, Shahram Exergoeconomic Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with External Reformer and Dimethyl Ether [Volume 52, Issue 6, 2020, Pages 1463-1478]
  • Khalilarya, Shahram Thermodynamic Analysis of a Novel Power, Cooling, Hydrogen and Oxygen Multi-Generation Combined Cycle Based on the Sabalan Geothermal Wells [Volume 53, Issue 1, 2021, Pages 135-154]
  • Khalilarya, Shahram Numerical Simulation of Flow, Natural Convection and Distribution of Nano Particles inside Trapezoidal Cavity using Buongiorno’s Model [Volume 52, Issue 9, 2020, Pages 2537-2550]
  • Khalilarya, Shahram Thermodynamic analysis and comparison of two new tri-generation (hydrogen, power, heating) systems using geothermal energy [Volume 53, Issue 5, 2021, Pages 2983-3002]
  • Khalilarya, Shahram Thermo-Economic Evaluation of a Power and Freshwater Production System Including a Liquid Metal Magnetohydrodynamic Unit Driven By a Concentrated Solar Tower and Biogas [Volume 53, Issue 11, 2022, Pages 5551-5572]
  • Khalili, Mohammad Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still [Volume 54, Issue 9, 2022, Pages 2103-2120]
  • Khalili, Mohammad Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Khalili, Seyed Mohammad Reza Effect of Functionally Graded Core on Dynamic Response of Sandwich Panel subjected to Transverse Low-velocity Impact [Volume 43, Issue 2, 2012, Pages 19-26]
  • Khalili, Seyed Mohammad Reza Analysis of Free Vibration of Sandwich Panels Based on Improved High-order Sandwich Panel Theory [Volume 43, Issue 2, 2012, Pages 27-33]
  • Khalili, Seyed Mohammad Reza Numerical and Experimental Investigation on Compressive Properties of Egg Box Cores in Biodegradable Sandwich Panels [Volume 54, Issue 4, 2022, Pages 843-858]
  • Khalili, Seyed Reza Tensile behavior of basalt and carbon fiber reinforced phenolic matrix composites under thermal shock cycles [Volume 44, Issue 2, 2013, Pages 1-9]
  • Khalili, Seyed Reza Finite element modeling of T-shaped connector panel - sandwich subjected to tensile loading [Volume 44, Issue 2, 2013, Pages 11-19]
  • Khalili Dehkordi, E. Numerical Study on Laminar Flow Over a Cylinder and Its Rotating Controllers for Suppressing the Vortex Shedding [Volume 50, Issue 4, 2018, Pages 849-862]
  • Khanafari, Ali Experimental Cathode-Anode Flooding Diagnosis of Polymer-Electrolyte Fuel Cell of Power under 300W Using Adaptive-Neuro-Fuzzy Method [Volume 54, Issue 3, 2022, Pages 615-628]
  • Khanaki, Mansour Optimization and Thermodynamic Analysis of the Dual Mixed Refrigerant Process of the Natural Gas Liquefaction [Volume 52, Issue 9, 2020, Pages 2357-2368]
  • Khanaki, Mansour Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Khanaki, Mansour Techno-Economic Feasibility of Energy Supply Systems from Renewable Sources of Solar and Biomass in Rural Areas Located In Cold and Dry Climate [Volume 53, Issue 1, 2021, Pages 81-100]
  • Khani, L. A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
  • Khani, Mohammad Reza Electrical and Thermodynamic Characteristics of Non-transfer Arc and Electric Direct Current Plasma Torch with Air Working Gas [Volume 54, Issue 5, 2022, Pages 1149-1166]
  • Khani, Salman Optimization of Micro-Textured Tools Geometric Parameters in Turning of 17-4PH Stainless Steel [Volume 54, Issue 10, 2023, Pages 2411-2428]
  • Khan Kalantari, saeid Design of Three-dimensional Robust Guidance Law Using Adaptive Dynamic Programming with Input Saturation Constraint [Volume 52, Issue 12, 2021, Pages 3411-3424]
  • Khanpour, Reza Simulation of the Liquid Spraying Process in the Dripping Mode by Using the Level- Set Method [Volume 52, Issue 4, 2020, Pages 847-862]
  • Kharazan, Masoud Investigation of Nonlinear Vibrations of A Cantilever Beam with A Transverse Fatigue Crack [Volume 53, Issue 10, 2022, Pages 5069-5084]
  • Khatibi, Mohammad Mahdi Experimental verification of indirect bridge mode shape identification using transmissibility of a passing vehicle [Volume 53, Issue 6, 2021, Pages 3529-2548]
  • Khatoonabadi, S. M. Investigation of Density Ratio Effects on Performance of the Pseudo-Potential Model in Multiphase Flows Simulation [Volume 49, Issue 3, 2017, Pages 507-520]
  • Khavasi, Ehsan Numerical Study of Lock Exchange Turbidity Current Depositional Behavior in Stratified Environment [Volume 51, Issue 6, 2020, Pages 1235-1252]
  • Khavasi, Ehsan Analysis and Simulation of Surge Phenomena in the First Stage of Axial Compressor of GE-frame 6 Gas Turbine [Volume 52, Issue 4, 2020, Pages 785-796]
  • Khavasi, Ehsan Numerical Simulation of Three-Dimensional and Bi-Disperse Particle-Laden Turbidity Current in an Experimental Channel in the Presence of an Obstacle [Volume 52, Issue 7, 2020, Pages 1955-1974]
  • Khavasi, Ehsan Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Khavasi, Ehsan Numerical simulation of Holmboe waves in intrusive gravity current using LES method [Volume 53, Issue 7, 2021, Pages 4261-4278]
  • Khavasi, Ehsan Studying Wind Effect on the Hydrodynamic Behavior of Lock-Exchange Density Current [Volume 53, Issue 9, 2021, Pages 4807-4826]
  • Khayyati, HamidReza Thermal stress analysis for an aluminum die cast die [Volume 53, Issue 4 (Special Issue), 2021, Pages 2687-2702]
  • Khazaee, A. M. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
  • Khazaee, Mostafa Modeling, design and investigation of seat suspension based on negative stiffness structure to improve the vibration environment for helicopter pilots [Volume 53, Issue 4 (Special Issue), 2021, Pages 2513-2538]
  • Khazaei, Mohammad Hosein Investigation of Thermal Performance Integrated Collector-Storage Solar Water Heater with Different Reflectors [Volume 45, Issue 1, 2013, Pages 75-82]
  • Kheradmand, S. Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
  • Kheradmand, Saeed Investigation of Geometric Characteristics on the Non-Reaction Supersonic Flow inside the Channel with the Presence of Cavities [Volume 53, Issue 11, 2022, Pages 5409-5428]
  • Khodabakhsh, Rasoul Nonlinear Vibrations of Graphene Reinforced Pipes Conveying Fluid [Volume 53, Issue 8, 2021, Pages 4483-4500]
  • Khodabakhshi, Amir Failure Analysis of Glass Fiber Reinforced Plastic Pipes and Crack Inlet Opening with J-Integral Criteria Under Internal Pressure [Volume 52, Issue 5, 2020, Pages 1179-1192]
  • Khodabandeh, B. Imitation Learning of Complex Behaviors to Humanoid Robots using Evolutionary Optimization of Neural Network of Unit Pattern Generator [Volume 50, Issue 5, 2019, Pages 1123-1136]
  • Khodadadi, Amin Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Khodadadi, Amin Comparison of penetration process of 2-layer elastomeric composite with thermoset composite using energy absorption equations [Volume 53, Issue 6, 2021, Pages 3657-3672]
  • Khodaparast, Sh. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
  • Khodarahmi, Hossein Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 4023-4050]
  • Khodayari, A. Designing a New Intelligent Image Processing Algorithm for Traffic Sign Detection and Recognition Based on Fuzzy Logic [Volume 50, Issue 1, 2018, Pages 207-218]
  • Khodayari, A. A Novel Algorithm for Automatic Parallel Parking a Car Based On Continuous-Curvature Clothoid Path Planning [Volume 50, Issue 5, 2019, Pages 1051-1060]
  • Khoddami, A.S. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
  • Khodsiani, Mohammadhassan Experimental Investigation of the Influence of Polymer Electrolyte Membrane Fuel Cells Operating Conditions on Its Performance and Water Management [Volume 52, Issue 11, 2021, Pages 3257-3274]
  • Khoeini Poor far, Alireza Acoustic Simulation of Hot and Cold Flow mixing by a Lobed Mixer in a High Bypass Ratio Turbofan Engine [Volume 54, Issue 7, 2022, Pages 1513-1532]
  • Khomami Abadi, Morteza Derivation of Explicit Relationships in the Determination of the Natural Frequency of Euler-Bernoulli Cracked Beams on Elastic Foundation the Using Rayleigh Method [Volume 52, Issue 5, 2020, Pages 1229-1244]
  • Khondabi, Reza Experimental and Numerical Investigation into the Effect of Core Density on the Energy Absorption of Sandwich Panels with Aluminum Face Sheets and Polyurethane Foam Core [Volume 52, Issue 10, 2021, Pages 2839-2858]
  • Khoogar, AhmadReza Kinetostatic Performance Comparison of Spherical Parallel Mechanisms Extracted from Type Synthesis with Modeling Clearance in Passive Joints [Volume 52, Issue 5, 2020, Pages 1301-1318]
  • Khoramdel, M. Numerical Study of Turbulence in Diesel Spray Combustion Using Large Eddy Simulation [Volume 50, Issue 4, 2018, Pages 823-836]
  • Khoramishad, Hadi A Study on the Ballistic Behavior of Kevlar Fabric Impregnated with Shear Thickening Fluid Containing Graphene Oxide Additive [Volume 53, Issue 12, 2022, Pages 5725-5738]
  • Khorasanizadeh, H. Investigation of Nanofluid Flow Field and Conjugate Heat Transfer in a Microchannel Heat Sink with Four Different Arrangements [Volume 51, Issue 2, 2019, Pages 381-398]
  • Khorasanizadeh, Hossein The Effects of an Enclosure Inclination Angle and its Walls Movement Direction on Variable Properties Nanofluid Mixed Convection [Volume 46, Issue 1, 2014, Pages 1-12]
  • Khorasanizadeh, Hossein Thermal performance and entropy generation analyses of nanofluid flow in a trapezoidal heat sink with different arrangements [Volume 51, Issue 4, 2019, Pages 101-110]
  • Khorasanizadeh, Hossein Numerical Simulation of Magnetic Field Effect on Thermal and Thermo-Hydraulic Performance and Entropy Generation of a Silicon Microchannel Heat Sink Under Uniform Heat Flux [Volume 53, Issue 1 (Special Issue), 2021, Pages 517-538]
  • Khorram, A. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
  • Khorram, Asghar Computational Investigation of the Effect of Adhesion between Cancer Cells and Vessel Walls on the Movement of the Cells in Blood Vessels [Volume 51, Issue 6, 2020, Pages 1271-1288]
  • Khorshidi, K. Free Vibration Analysis of Two-Dimensional Functionally Graded Annular Sector Plates with Piezoelectric Layers Resting on Two-Parameter Elastic Foundation [Volume 51, Issue 1, 2019, Pages 109-118]
  • Khorshidian, M. Experimental Study of the New Design 2.5kW Dead-End H2 /O2 PEM Fuel Cell Stack with New Design to Improve Fuel Utilization [Volume 50, Issue 2, 2018, Pages 369-376]
  • Khorshidian, Majid Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
  • Khorshidian, Majid Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Khoshgoftar, Mohammad Javad Three Dimensional Design and Finite Element Analysis of Scaffold for Use in Damaged Bone Tissue [Volume 54, Issue 12, 2023, Pages 2801-2820]
  • Khoshkhoo, Rouhollah Acoustic Simulation of Hot and Cold Flow mixing by a Lobed Mixer in a High Bypass Ratio Turbofan Engine [Volume 54, Issue 7, 2022, Pages 1513-1532]
  • Khoshnejad, Ali Effects of air injection at rotor blade row tip region of an axial compressor on its performance under inlet distortion conditions [Volume 53, Issue 3 (Special Issue), 2021, Pages 1729-1744]
  • Khoshnevis, Arman Numerical Simulation of Non-Newtonian Blood Flow in A Three-Dimensional Non-Planar Bifurcation with Stenosis [Volume 53, Issue 9, 2021, Pages 4865-4886]
  • Khosravi, Saeed Singularity, dynamics and kinetics analysis of a 5-DOF parallel robot using screw theory [Volume 55, Issue 8, 2023, Pages 943-970]
  • Khosravi Enjedani, Zahra Approximate Torsional Analysis of Arbitrary Trapezoidal Bars by Kantorovich Method [Volume 53, Issue 10, 2022, Pages 5203-5220]
  • Khosravifard, Seyed Amir Nonlinear Transient Heat Transfer Analysis Using Two Integration Methods with Different Distributions of Integration Points in the Domain in a Meshless Formulation [Volume 53, Issue 1 (Special Issue), 2021, Pages 553-572]
  • Khosroabadi, Aliasghar Studying of droplet impingement on hydrophilic and hydrophobic curved surfaces by lattice Boltzmann method based on Allen-Cahn equation [Volume 53, Issue 5, 2021, Pages 2869-2886]
  • Khosroabadi, Hassan Comparing Cooling and Lubricating Effects of Different Cutting Fluid Applications in Micromilling Process [Volume 52, Issue 3, 2020, Pages 605-618]
  • Khosroanjom, Mehdi Experimental Study of the Supersonic Exhaust Diffuser Spray Cooling System [Volume 52, Issue 7, 2020, Pages 1793-1808]
  • Khosrodad, masoud Experimental investigation on MWCNTs-COOH nano fluid on 3D oscillating heat pipe [Volume 53, Issue 5 (Special Issue), 2021, Pages 3401-3416]
  • Khosrojerdi, Ehsan The Study of Effective Process Parameters in the Warm Sheet Hydroforming [Volume 51, Issue 5, 2019, Pages 1057-1068]
  • Kiaee, Hossein Cooperative path planning for leader – follower formation of Multi UAV based on the minimum energy consumption for load transportation [Volume 52, Issue 12, 2021, Pages 3327-3340]
  • Kiani, Maryam Modified Variable Structure Estimation and Control for Constrained Landing on Mars [Volume 53, Issue 10, 2022, Pages 5055-5068]
  • Kiani, Mehrdad Parametric Study of Temperature Field of Impinging Burner of Synthetic Gas by Interferometry Mach-Zehnder Method [Volume 51, Issue 4, 2019, Pages 51-60]
  • Kianifar, Ali Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Kiani Shahvandi, Mohammad Numerical Study of Therapeutic Effectiveness of Bolus Injection and Continuous Infusion on Drug Delivery to Vascularized Solid Tumor [Volume 54, Issue 11, 2023, Pages 2543-2560]
  • Kohan, Mohammad Reza Determining the optimal number of collector layers in fog water harvesting system [Volume 55, Issue 11, 2024, Pages 3-3]
  • Kokabi, Mehrdad The Effect of Aspect Ratio and Temperature-dependent Fluid properties of Effective Parameters in Micro Heat Exchanger [Volume 43, Issue 1, 2012, Pages 41-49]
  • Kolahdooz, Habib Experimental Study of Premixed Methane-Air Flame Propagation in a Closed Duct with Porous Obstacle [Volume 52, Issue 11, 2021, Pages 3225-3240]
  • Kolak, H. Experimental Study of Premixed Flames Stabilization with Al2O3 Porous Media [Volume 49, Issue 3, 2017, Pages 625-634]
  • Koochakianfard, Omid Nonlocal Vibration of Nanobeam Embedded in Viscoelastic Pasternak Foundation with Longitudinal and Rotational Motions with Surface Effects [Volume 54, Issue 10, 2023, Pages 2215-2238]
  • Koohsorkhi, Javad Vertical growth of titanium dioxide nanorods on nebulizer fluorine doped tin oxide deposited on silicon microarrays [Volume 53, Issue 6 (Special Issue), 2021, Pages 4051-4062]
  • Korani, Mohammad Hossein Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis [Volume 54, Issue 8, 2022, Pages 1867-1894]
  • Kosari, Farshad Reconstruction of Electrical Tomography Images based on Parameter Estimation Method in Inverse Heat Transfer [Volume 53, Issue 1 (Special Issue), 2021, Pages 483-498]
  • Kouhi Gilvan, Hamed Leader Following and Multiple Obstacle Avoidance of Autonomous Vehicle with Steering-Wheel and Driving-Wheel Torques Using Path Planning and Model Predictive Control [Volume 55, Issue 12, 2024, Pages 4-4]
  • Kouhikamali, Ramin Simulation of a Forced Multiple Effect Brine Concentration Process [Volume 54, Issue 3, 2022, Pages 509-530]
  • Kouhikamali, Ramin Numerical Study of the Effect of Geometric Parameters on the Performance of Solid-Liquid Ejectors [Volume 55, Issue 1, 2023, Pages 105-122]
  • Kouhi Kamali, Ramin The Effect of Surface Types on Bubble Dynamic Formation During Nucleate Pool Boiling by Use of Lee and Tanasawa Phase Change Models [Volume 52, Issue 9, 2020, Pages 2521-2536]
  • Kouhi Kamali, Ramin Simulation of Two-Phase Flow and Heat Transfer in a Channel and around a Tube by Lattice-Boltzmann Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 499-516]
  • Kouhi Kamali, Ramin Performance Evaluation of a Fluidized Bed Reactor by Studying the Hydrodynamics and Thermal Properties of Different Solid Particles [Volume 53, Issue 3, 2021, Pages 1573-1590]
  • Kouhi Kamali, Ramin Two-dimensional simulation of nucleation pool boiling and investigation of phase change mechanism at low heat fluxes [Volume 53, Issue 3 (Special Issue), 2021, Pages 1883-1896]
  • Kouravand, Shahriar Study of Mechanical-Biosystemic Complications of Mazut and New Methods to Reduce Pollutants in Iranshahr Power Plant [Volume 52, Issue 2, 2020, Pages 419-436]
  • Kousheshi, navid Investigation of Performance and Emission Characteristic of a Reactivity Controlled Compression Ignition Engine Fueled By a Mixture of Diesel and Syngas Derived From Biomass Gasification [Volume 53, Issue 1, 2021, Pages 17-30]
  • Kowsari, Farshad Inverse Conduction Heat Transfer in a Channel Filled with Porous Material under Local Thermal Non-Equilibrium Condition [Volume 41, Issue 2, 2010, Pages 29-36]
  • Kowsari, Farshad Solution of the Isotropic Heat Equation Using the Finite Volume Monte Carlo Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 467-482]
  • Kymyabakhsh, Masoud Experimental and Numerical Determination of Fracture Toughness in Gas Pipeline Steel of Grade API X65 [Volume 45, Issue 2, 2013, Pages 1-9]

L

  • Lak, Mojtaba Numerical investigation of the influence of operating conditions on the performance of PEMFC powered Unmanned Aerial Vehicle (UAV): a statistical approach [Volume 55, Issue 3, 2023, Pages 407-430]
  • Lakzian, Esmaeil An Investigation of Condensing Steam Flow in a Turbine Cascade with Injection of Water Droplets at Inlet [Volume 43, Issue 1, 2012, Pages 71-84]
  • Lalegani Dezakia, Amin Numerical Simulation of Elastoplastic Behavior and Damage Evolution at Various Stress Triaxiality [Volume 53, Issue 12, 2022, Pages 5703-5724]
  • Laraibi, I. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
  • Lashgari, Mohammad Modeling and linearization of longitudinal dynamics for a flapping wing micro aerial vehicle dragonfly-like with active rigid tail [Volume 53, Issue 6, 2021, Pages 3445-3464]
  • Lekzian, Elyas Effect of Obstacles Location and Flow Injection on the Mixing of Two-Gaseous Flow in a Microchannel [Volume 54, Issue 9, 2022, Pages 2139-2156]
  • Lexian, Hosein Free and Forced Vibration Analysis of Stiffened Cylindrical Shells under Moving Internal Pressure [Volume 53, Issue 12, 2022, Pages 5867-5886]
  • Liaghat, gholamhossain Comparison of penetration process of 2-layer elastomeric composite with thermoset composite using energy absorption equations [Volume 53, Issue 6, 2021, Pages 3657-3672]
  • Liaghat, gholamhossain Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Liaghat, gholamhossein Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Livani, Mostafa Free Vibration Analysis of Doubly Curved Composite Sandwich Panels with Variable Thickness [Volume 52, Issue 8, 2020, Pages 2195-2212]
  • Liyaghat, Gholamhosein Deformation of Blunt Projectiles during Penetration into Deformable Medium Metallic Targets [Volume 42, Issue 1, 2011, Pages 77-87]
  • Loghman, A. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]
  • Lopez-Crespo, Pablo Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]

M

  • Maani Miandoab, Ehsan CubeSat antenna vibration control using piezoelectric bender considering system requirements [Volume 53, Issue 4, 2021, Pages 2217-2238]
  • Madadi, Ali Design and Analysis of Gas Ejector in High Altitude Test Facility [Volume 52, Issue 11, 2021, Pages 3015-3032]
  • Madadi, Ali Optimization of S-Shaped Inlet Diffuser for Improvement of Total Pressure Loss and Flow Uniformity [Volume 52, Issue 11, 2021, Pages 3171-3186]
  • Madadi, Ali Optimization of The Slotted Gurney-Flap Geometry Applied to NACA 0012 Airfoil for Aerodynamic Performance Improvement [Volume 53, Issue 11, 2022, Pages 5331-5348]
  • Maddahian, Reza Reconstruction of Electrical Tomography Images based on Parameter Estimation Method in Inverse Heat Transfer [Volume 53, Issue 1 (Special Issue), 2021, Pages 483-498]
  • Maddahian, Reza Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Maddahian, Reza Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model [Volume 54, Issue 7, 2022, Pages 1533-1552]
  • Maerefat, Mahdi Analysis of Combined Conduction-Radiation Heat Transfer In Multilayer Insulations [Volume 46, Issue 1, 2014, Pages 47-56]
  • Maerefat, Mehdi An Air Zonal Model for Predicting Air Flow, Temperature Distribution and Humidity Distribution in Buildings [Volume 47, Issue 1, 2015, Pages 47-57]
  • Maerefat, Mehdi Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Maerefat, Mehdi Experimental investigation of personalized ventilation effects on temperature, velocity, and draught discomfort distribution in an office [Volume 53, Issue 7, 2021, Pages 4397-4410]
  • Mafi, M. Tracer Kinetic Modeling and Derivation of Time Activity Curves in Positron Emission Tomography in order to Enhance Accuracy in Cancerous Regions Diagnosis [Volume 50, Issue 4, 2018, Pages 813-822]
  • Mafi, Mostafa Techno-Economic Feasibility of Energy Supply Systems from Renewable Sources of Solar and Biomass in Rural Areas Located In Cold and Dry Climate [Volume 53, Issue 1, 2021, Pages 81-100]
  • Maghrebi, Mohammad Javad Improving the power coefficient of the Darrieus vertical axis wind turbine with the aid of morphing airfoils [Volume 53, Issue 5 (Special Issue), 2021, Pages 3227-3240]
  • Maghrebi, Mohammad Javad Improvement of aerodynamic coefficients of the airfoil with free form deformation with the aid of Artificial Neural Networks and Genetic Algorithm [Volume 53, Issue 7, 2021, Pages 4113-4132]
  • Maghrebi, Mohammad Javad Experimental Investigation of Flow Rate and Concentration Effects of Graphene-Water Nanofluid and Finding the Optimal Conditions Using Taguchi Method [Volume 54, Issue 3, 2022, Pages 629-648]
  • Maghsoudloo, Hamed Improving Mechanical Properties of Ultrafine-Grained Titanium Produced through Warm ECAP Using a Novel Lubrication System [Volume 51, Issue 5, 2019, Pages 1047-1056]
  • Mahbadi, H. Free Vibration Analysis of Two-Dimensional Functionally Graded Annular Sector Plates with Piezoelectric Layers Resting on Two-Parameter Elastic Foundation [Volume 51, Issue 1, 2019, Pages 109-118]
  • Mahbadi, Hossein The effect of accuracy of the length scale parameter on natural frequencies of porous rectangular microplate [Volume 53, Issue 2 (Special Issue), 2021, Pages 1179-1196]
  • Mahdavi, Ali Approximate Torsional Analysis of Arbitrary Trapezoidal Bars by Kantorovich Method [Volume 53, Issue 10, 2022, Pages 5203-5220]
  • Mahdavi, Amir Experimental study of manufacturing and characterization of a flow-focusing microchannel to produce thermoresponsive microparticles for on-demand smart drug delivery [Volume 53, Issue 5 (Special Issue), 2021, Pages 3257-3274]
  • Mahdavi, Amir Control of droplet size in a two-phase microchannel using PID controller: A novel experimental study [Volume 53, Issue 7, 2021, Pages 4279-4292]
  • Mahdavi, Mohammad Hadi Flexural Vibration of Atomic Force Microscope Cantilever with Dimensional Effects [Volume 41, Issue 1, 2010, Pages 19-26]
  • Mahdavi keshavar, Omid Study of the Natural Circulation Heat Recovery Steam Generator Unsteady Behavior Using One Dimensional Model for the Evaporator Loop [Volume 52, Issue 9, 2020, Pages 2369-2386]
  • Mahdavikhah, mehdi The Optimum Diameter of Silica- Gel Particles in Adsorption Chillers [Volume 46, Issue 1, 2014, Pages 89-101]
  • Mahdevari, Satar Numerical modeling of rock cutting with abrasive water jet in order to determine the optimal range of parameters affecting the depth and volume of cutting [Volume 55, Issue 8, 2023, Pages 971-994]
  • Mahdipour Jalilian, Maziar Numerical investigation and prediction of grain size in different friction stir welding areas of AA6061 aluminum alloy [Volume 53, Issue 6, 2021, Pages 3751-3760]
  • Mahdizade, E. Thermodynamic Analysis of Humidification-Dehumidification Desalination System with Semi-open Air Circulation [Volume 49, Issue 3, 2017, Pages 643-652]
  • Mahdizadeh soula, Ali Asghar Sliding Mode Control of Droplet Size in a Microchannel by Adjusting Syringe-Pump Flow: Experimental Study [Volume 54, Issue 10, 2023, Pages 2239-2254]
  • Mahmoodi, M. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
  • Mahmoodi, M. The Design of a New Rotary Flow Control Valve with a Pressure Compensator for a Turbojet Engine [Volume 50, Issue 2, 2018, Pages 413-424]
  • Mahmoodi, M. The Experimental Study of Effective Characteristics on Differential Pressure Value Setting of Quarter-turn Actuator in Gas Transportation Pipelines [Volume 50, Issue 4, 2018, Pages 837-848]
  • Mahmoodi Darian, Hossein Developing an alternating direction explicit-implicit domain-decomposition approach to solve heat transfer equation on graphics processing unit [Volume 53, Issue 3 (Special Issue), 2021, Pages 1915-1936]
  • Mahmoudabad, M.A. Investigation of the Effect of Longitudinal Distance Between Two Cars on Fuel Consumption and Drag Coefficient [Volume 50, Issue 4, 2018, Pages 893-902]
  • Mahmoud Abadi, Mohammad mehdi Simulation and Test of PV/T Air Systems with Natural Air Flow Operation [Volume 43, Issue 1, 2012, Pages 31-40]
  • Mahmoudi, S. M. S. A new electrical power and cooling cogeneration cycle based on a solid oxide fuel cell [Volume 49, Issue 1, 2017, Pages 231-237]
  • Mahmoudimehr, Javad Numerical Investigation of the Influence of Burner’s Bluff Body on Air-Fuel Mixing and Reaction [Volume 53, Issue 9, 2021, Pages 4981-4998]
  • Mahmoudimehr, Javad Numerical Simulation of a Biogas-fueled Solid Oxide Fuel Cell and the Investigation of the Influence of Operating Conditions [Volume 55, Issue 7, 2023, Pages 895-916]
  • MahmoudiMehr, Javad A Novel Biomass-Driven Cogeneration System for Zero-Energy Buildings [Volume 52, Issue 6, 2020, Pages 1443-1462]
  • Mahmoudpour, Ebrahim The Effect of Magnetic Field and Fluid on the Primary and Secondary Frequency Response of Fluid-Conveying Carbon Nanotubes Using a Stress-Driven Nonlocal Integral Model [Volume 54, Issue 10, 2023, Pages 2315-2332]
  • Mahmudimanesh, Morteza Synthesis of Optimal Heat-Integrated Distillation Columns Sequence with Mathematical Programming method based on Superstructure Optimization [Volume 48, Issue 3, 2016, Pages 227-238]
  • Mahnam, Mehdi An Efficient Approach to Discrete Multiple Different Facility Location Problem [Volume 41, Issue 2, 2010, Pages 83-92]
  • Mahzoon, M. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
  • Majidi, H.R. Brittle Fracture in Key-hole Notched Polymer Specimens under Combined Compressive-shear Loading [Volume 50, Issue 5, 2019, Pages 927-942]
  • Majidi, Marzie Developing an Analytical Model for Viscoelastic Anisotropic Dielectric Elastomer and Investigating the Rate Dependent Electromechanical Behavior [Volume 54, Issue 12, 2023, Pages 2781-2800]
  • Majidi Mozafari, Kazem Natural Frequency Analysis of Rotating Thin-Walled Beams with Embedded Shape Memory Alloy Wires Subjected to Uniform Temperature Field [Volume 52, Issue 1, 2020, Pages 127-140]
  • Majnouni Mehrdar, Moein Investigating the Influence of Geometry on Performance Characteristics of Mounted Cushions in Hydraulic Cylinders [Volume 51, Issue 6, 2020, Pages 1187-1200]
  • Makulati, Nazila Pool Boiling Simulation on Vertical Plate with Triangular & Circular grooves [Volume 54, Issue 11, 2023, Pages 2645-2662]
  • Makvandi, Hesam Crack identification in postbuckled plates using differential quadrature element method and sequential quadratic programming [Volume 51, Issue 3, 2019, Pages 51-60]
  • Malaeke, Hasan Modeling Nonlinear Free Vibrations of Wind Turbine Tower [Volume 51, Issue 3, 2019, Pages 121-130]
  • Malakoti khah, Hamed Design and Manufacturing of a Vibration Absorber for Sound Reduction of a Turboprop Aircraft [Volume 44, Issue 1, 2012, Pages 91-99]
  • Maleki, Ali Three-Dimensional Elastic-Plastic Deformation Analysis of Composite Sandwich Panel under Blast Loading [Volume 52, Issue 5, 2020, Pages 1079-1100]
  • Maleki, H.N. Investigation of Bolt Clamping Force Effect on T-stress in Mixed Mode Fracture [Volume 49, Issue 2, 2017, Pages 291-298]
  • Maleki, H.N. Comparison Between Composite Patches and Bolt Clamping Force to Repair an Edge Crack in Aluminum Alloy 2024-T3 Specimens [Volume 50, Issue 3, 2018, Pages 627-640]
  • Maleki, Mehdi The Effect of Fiber Shape and Spacing on Stress Distribution in a Composite Monolayer with an Internal Crack [Volume 42, Issue 3, 2011, Pages 21-28]
  • Maleki, Sattar Experimental and Numerical Investigation of Second Mode of Failure in Unlike End Notch Flexure Samples [Volume 52, Issue 8, 2020, Pages 2093-2106]
  • Maleki-Delarestaghi1, S. Experimental Investigation of the Forced Convection Heat Transfer of Nanofluids in Curved Tubes [Volume 50, Issue 2, 2018, Pages 347-358]
  • Maleki Nejad, J. Numerical study of melt flow and depth of HAZ in laser welding of titanium alloy plate Ti6Al4V [Volume 49, Issue 2, 2017, Pages 523-430]
  • Malek-jafarian, Majid Introduction of an improved Harmony Search Optimization Algorithm for investigating of Airfoil Parameterization Methods and Aerodynamics optimization [Volume 47, Issue 1, 2015, Pages 13-31]
  • Malek Jafarian, Seyyed Majid Experimental Study of the Effect of Fluid Jet Swirl on Circular Hydraulic Jump [Volume 53, Issue 7, 2021, Pages 4153-4170]
  • Malek Mohamadi, Shokoufeh Wind simulation in a complex terrain by numerical weather prediction method using large eddy simulation [Volume 53, Issue 7, 2021, Pages 4221-4240]
  • Malek Zade Fard, Keramat Effect of Functionally Graded Core on Dynamic Response of Sandwich Panel subjected to Transverse Low-velocity Impact [Volume 43, Issue 2, 2012, Pages 19-26]
  • Malek Zade Fard, Keramat Analysis of Free Vibration of Sandwich Panels Based on Improved High-order Sandwich Panel Theory [Volume 43, Issue 2, 2012, Pages 27-33]
  • Malekzadeh Fard, K. Buckling Analysis of Designed Fiber Metal Laminate Circular Cylindrical Shell Based on Maximum Tension Fracture Criterion [Volume 51, Issue 1, 2019, Pages 65-78]
  • Malekzadeh Fard, Keramat Dynamic Response of Sandwich Panels with Flexible Cores and Elastic Foundation Subjected to Low-Velocity Impact [Volume 45, Issue 2, 2013, Pages 27-42]
  • Malekzadeh Fard, Keramat Free Vibration Analysis of Doubly Curved Composite Sandwich Panels with Variable Thickness [Volume 52, Issue 8, 2020, Pages 2195-2212]
  • Malekzadeh Fard, Keramat Analysis of dynamic instability in sandwich thick beams with flexible functional core subjected to a follower force [Volume 53, Issue 2, 2021, Pages 863-880]
  • Malekzadeh Fard, Keramat Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Malekzadeh Varnosfadrani, Maryam Unmanned Aerial Vehicle Formation Flying Path Plan by Combined Algorithm of Potential and Lyapunov [Volume 52, Issue 1, 2020, Pages 85-96]
  • Maljaee, Mohammad Ali Experimental Study of Effects of Bleed Geometric Parameters on the Performance of a Supersonic Axisymmetric Intake [Volume 52, Issue 7, 2020, Pages 1809-1828]
  • Malmir Chegini, Yahya Numerical investigation of the effect of thermophysical properties of nanofluid on fluid flow and heat transfer in a tube in presence of magnetic field [Volume 53, Issue 7, 2021, Pages 4329-4344]
  • Mani, M. Experimental and Numerical Investigation of Aerodynamic Performance of a Star-Shaped Damaged Wing [Volume 49, Issue 1, 2017, Pages 19-28]
  • Mani, Mahmoud New Development in Direct Simulation Monte Carlo Algorithm for Asymmetric Complex Geometry [Volume 52, Issue 7, 2020, Pages 1757-1772]
  • Mani, Mahmoud Experimental investigation of the effect of flapping on the lift and thrust forces of 3D-wing [Volume 53, Issue 3 (Special Issue), 2021, Pages 1697-1708]
  • Mani, Mahmoud Optimization of The Slotted Gurney-Flap Geometry Applied to NACA 0012 Airfoil for Aerodynamic Performance Improvement [Volume 53, Issue 11, 2022, Pages 5331-5348]
  • Mansoori, Shabnam Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Mansoori, Z. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
  • Mansouri, Nematollah Investigate of Hydrodynamic and Mass Transfer in the Spacer-Filled Channel of Reverse Osmosis Module [Volume 53, Issue 1 (Special Issue), 2021, Pages 393-410]
  • Mansouri, Saeid Experimental and Numerical Investigation of Width Reduction Effect on the Output Power of Piezoelectric Energy Harvester Beam [Volume 52, Issue 5, 2020, Pages 1257-1272]
  • Mantashloo, R. Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2018, Pages 743-758]
  • Marashi, SeyedMaziar Experimental verification of indirect bridge mode shape identification using transmissibility of a passing vehicle [Volume 53, Issue 6, 2021, Pages 3529-2548]
  • Marghoubkar, M. R. Tracer Kinetic Modeling and Derivation of Time Activity Curves in Positron Emission Tomography in order to Enhance Accuracy in Cancerous Regions Diagnosis [Volume 50, Issue 4, 2018, Pages 813-822]
  • Maroofiazar, Rasool Experimental and numerical study of energy harvesting from sloshing of a liquid and its performance on shaper machine [Volume 53, Issue 6 (Special Issue), 2021, Pages 3911-3924]
  • Maroofiazar, Rasool Passive Control of Vibrations of High-Rise Structure Using Tuned Liquid Damper under Wind and Earthquake Excitations [Volume 53, Issue 11, 2022, Pages 5367-5388]
  • Maroofiazar, Rasool Energy Harvesting from Pool Boiling Using Electromagnetic Induction: Experimental Study and Numerical Simulation [Volume 54, Issue 7, 2022, Pages 1701-1716]
  • Maryami, R. Experimental Investigation of Flow Induced Noise Around Circular Cylinder by Measuring Unsteady Surface Pressures [Volume 51, Issue 2, 2019, Pages 329-346]
  • Maryami, Reza Experimental Investigation of the Bubbly Drag Reduction in the Presence of Axial Flow in a the Couette-Taylor System [Volume 47, Issue 1, 2015, Pages 33-45]
  • Maryami, Reza Experimental investigation of the turbulence effect of incoming flow on the unsteady pressure field and the flow noise around circular cylinder [Volume 52, Issue 4, 2020, Pages 923-942]
  • Marzban Shirkharkolaee, E. Investigation the possibility of producing a tractor’s hood as integrate with hydroforming method [Volume 49, Issue 2, 2017, Pages 387-400]
  • Masoumi, A. Influence of Interface Morphology on the Bond Strength During the Reshaping Process of Al-Cu Bimetal Pipes [Volume 50, Issue 3, 2018, Pages 467-478]
  • Masoumi Dehaghi, E. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
  • Masroori Saadat, H. Experimental Investigation and Numerical Simulation of the Pressure Force on the Formation of Metallic Bipolar Plate in the Stamping Process [Volume 50, Issue 3, 2018, Pages 505-516]
  • Masrour, Javad Gust Response Analysis of Flexible Aircraft [Volume 52, Issue 1, 2020, Pages 97-108]
  • Masrour, Javad Gust Load Alleviation of Flexible Aircraft [Volume 54, Issue 2, 2022, Pages 289-308]
  • Masrouri Saadat, Sayed Hossein Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
  • Masrouri Saadat, Sayed Hossein 1-1- Two Phase Simulation of Droplets Motion in Cathode Channels and Manifolds of Polymer Electrolyte Membrane Fuel Cell [Volume 52, Issue 9, 2020, Pages 2479-2490]
  • Masrouri Saadat, Sayed Hossein Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Masrouri Saadat, Sayed Hossein Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Mazaheri, Keumars Effect of Liner Material Model on Explosively Formed Projectiles (EFP) Simulation [Volume 41, Issue 2, 2010, Pages 21-28]
  • Mazaheri, Kiumars Reducing NOx emissions in gas turbine combustor by steam injection using CLN technique [Volume 48, Issue 3, 2016, Pages 247-256]
  • Mazaheri, Kiumars Chemical and Physical Effects of Carbon Dioxide Injection with Different Preheating Temperature in Flameless Combustion [Volume 52, Issue 2, 2020, Pages 311-328]
  • Mazaheri, Kiumars Numerical Study of the Flat Flame Burner Power Effect on the Producing Uniform Temperature Distribution in Cracking Furnaces [Volume 52, Issue 6, 2020, Pages 1379-1396]
  • Mazaheri, Kiumars Maps of Flame Dynamics for Premixed Lean Hydrogen-Air Combustion in a Heated Microchannel [Volume 52, Issue 9, 2020, Pages 2443-2464]
  • Mazaheri, Kiumars One-dimensional Combustion Simulation for Different Hydrogen-enriched Natural Gas Blends [Volume 53, Issue 1, 2021, Pages 53-64]
  • Mazidi, A. Flutter Analysis of Adaptive Wing with the Adjustment of Spar Position [Volume 50, Issue 1, 2018, Pages 197-206]
  • Mazidi, Abbas Active Flutter Control of a Swept Wing with an Engine by using Piezoelectric Actuators [Volume 51, Issue 3, 2019, Pages 161-170]
  • Mazidi, Abbas Modeling and Flutter Analysis of a Three Dimensional Box-Wing using Wagner Unsteady Aerodynamic Model [Volume 53, Issue 12, 2022, Pages 5809-5830]
  • Mazloum, Jalil Numerical analysis of mechanical micropump using membrane-based check-valves for microfluidic applications [Volume 53, Issue 5 (Special Issue), 2021, Pages 3171-3186]
  • Mazloum, Jalil Increasing the Sensitivity of SiO2/Al Micro Cantilever Infrared Detector Based on Micro Electromechanical Systems Technology by Optimizing of Dimensions [Volume 53, Issue 8, 2021, Pages 4717-4728]
  • Meghdari, Ali onceptual Design of an Apparatus for Tri-axial Measurement of Lumbar Torques in Isometric Mode [Volume 42, Issue 1, 2011, Pages 45-53]
  • Meghdari, Ali Impacts of Social Robots in Education and Rehabilitation of Children with Autism in Iran [Volume 52, Issue 8, 2020, Pages 2329-2354]
  • Mehdipoor, Mahnaz Design and simulation of a biosensor based on a microelectromechanical resonator array [Volume 53, Issue 6 (Special Issue), 2021, Pages 3841-3854]
  • Mehdipour, Hadi Numerical Analysis of Mechanical Behavior of Semi-Crystalline Polymers Based on Continuum Damage Mechanics [Volume 51, Issue 5, 2019, Pages 981-992]
  • Mehdipour, Hadi Three-dimensional micromechanical modelling of effective elastic properties of graphene nanoplatelet-reinforced polymer nanocomposite using a HFGMC-based homogenization approach [Volume 55, Issue 4, 2023, Pages 495-514]
  • Mehdi Zade, Masoud Experimental and Numerical Study of Buckling of Steel Cylindrical Shells with Quasi Elliptical Cutout Subjected to Axial Compression load [Volume 42, Issue 1, 2011, Pages 1-8]
  • Mehdizadeh, M. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
  • Mehmannavaz, Hossein Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Mehrabi, M. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
  • Mehrabi, M. Buckling and Vibration Analyses of Double-bonded Micro Composite Plates Reinforced by CNTs and BNNTs Based on MSGT [Volume 51, Issue 1, 2019, Pages 79-96]
  • Mehrabian, Morteza Numerical Simulation of a Biogas-fueled Solid Oxide Fuel Cell and the Investigation of the Influence of Operating Conditions [Volume 55, Issue 7, 2023, Pages 895-916]
  • Mehrani, Reza Simulation of Chatter in Cold Rolling Strip using Finite Element Method [Volume 42, Issue 1, 2011, Pages 89-97]
  • Mehrdoost, Zahra Multiscale simulation of flow in fractured porous media using unstructured grids [Volume 53, Issue 7, 2021, Pages 4133-4152]
  • MEHRE, NABI Simulation of Orthotropic Damaged Zone Behavior Using Viscoelastic Models [Volume 48, Issue 4, 2017, Pages 401-410]
  • Mehri, Reyhane Analysis of Damaged Ship Behavior in Sea Waves [Volume 44, Issue 1, 2012, Pages 79-90]
  • Mehrjoy, N. Investigating the Effect of Radiation Scattering and Surface Emission on Combined Convection Heat Transfer in an Enclosure with Moving Insulation Surface [Volume 50, Issue 6, 2019, Pages 1289-1302]
  • Mehr Panahi, Abdollah Multi Objective Optimization of Feedwater Heating Repowering on a Steam Power Plant Using the Genetic Algorithm [Volume 45, Issue 1, 2013, Pages 93-108]
  • Mehrpour, Saeed Reza Desired Properties of Disc in Numerical Models and Its Influence on Biomechanical Behavior of Lumbar Spine [Volume 52, Issue 1, 2020, Pages 187-202]
  • Memarian, Mohammad Mahdi Modeling of hyperelastic incompressible behavior of functionally graded material under bending load [Volume 52, Issue 8, 2020, Pages 2045-2062]
  • Menhaj, Mohammad Bagher Nonlinear optimal control of an active transfemoral prosthesis using state dependent Riccati equation approach [Volume 53, Issue 4, 2021, Pages 2117-2136]
  • Mesgarpoor Tousi, A. Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
  • Meshkat, Seyed Salar Synthesis of Carbonous Nano Adsorbents and Their Application in Methane Gas Storage [Volume 54, Issue 9, 2022, Pages 2121-2138]
  • M. Heidari, M. Analytical Solution of Heat Transfer in LaserIrradiated Skin Tissue with Surface Heat Convection Using Dual Phase Lag Model [Volume 50, Issue 2, 2018, Pages 285-294]
  • Miladi, Haddad State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Minaei, Asgar Thermal Comfort Evaluation for Naturally Ventilated Building Applying an Adaptive Model in Different Cities of Iran [Volume 54, Issue 11, 2023, Pages 2663-2680]
  • Mirakhorly, Fateme An Image-Based Computational Simulation of Pulmonary Embolism Using Radiological Images [Volume 52, Issue 7, 2020, Pages 1847-1864]
  • Mirali, Faraz Experimental investigation of heat transfer and pressure drop in perforated ribs in the solar air heater channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1981-2000]
  • Miralinaghi, ئشاسشسشیشف Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • Mirbabaei, seyed Ahmadreza Experimental Study of the Supersonic Exhaust Diffuser Spray Cooling System [Volume 52, Issue 7, 2020, Pages 1793-1808]
  • Mirbagheri, Mehran Numerical Study of the Flat Flame Burner Power Effect on the Producing Uniform Temperature Distribution in Cracking Furnaces [Volume 52, Issue 6, 2020, Pages 1379-1396]
  • Mirbagheri, Seyed Mohammad Hossein Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Mirbagheri, S.M.H. Multiphase Simulation of Aluminum A356 Metal Foam Formation Process by Lattice Boltzmann Method [Volume 50, Issue 4, 2018, Pages 741-754]
  • Mirbozorgi, S. A. Numerical investigation of Joule heating effects on electroosmotic flow through a microchannel with triangular cross-section [Volume 47, Issue 1, 2015, Pages 81-90]
  • Mirbozorgi, Seyed Ali Numerical and Analytical Investigation of Induced Voltage in the Liquid Pressure-Driven Micro-Flows [Volume 42, Issue 2, 2011, Pages 69-77]
  • Mirbozorgi, Seyed Ali Numerical analysis of distinction boundary of surface roughness and wall blocks in laminar pressure-driven flow within the rugged microchannels [Volume 53, Issue 5 (Special Issue), 2021, Pages 3241-3256]
  • Mirdamadi, H. R. Static Analysis of Bending, Stability, and Dynamic Analysis of Functionally Graded Plates by a Four-Variable Theory [Volume 45, Issue 2, 2013, Pages 11-25]
  • Mirfalah Nasiri, seyedeh Maryam Investigation on the Effect of Different Constitutive Models on the Forming Limit of the Sheet under Nonlinear Strain Path [Volume 54, Issue 4, 2022, Pages 925-944]
  • Mirfalah Nasiri, seyedeh Maryam Theoretical Analysis of the Effects of Hardening Laws, Normal and Through Thickness Shear Stresses on Forming Limit Curves of AA6016-T4 [Volume 54, Issue 6, 2022, Pages 1391-1408]
  • Miri-Aliabad, Ghasem Design and Multi-Objective Optimization of A Magnetohydrodynamic Drug Delivery Infusion Micropump [Volume 53, Issue 10, 2022, Pages 5221-5238]
  • Miripour Fard, Behnam Modeling and Sliding Mode Control of Rotating Helical Pump [Volume 52, Issue 8, 2020, Pages 2277-2292]
  • Mirmohammadi, َAli Investigation on Effect of Multiple Injection on Performance and Emission Reduction in a DI Diesel Engine [Volume 43, Issue 1, 2012, Pages 1-10]
  • Mir Mohammadi, Mir Mohammad Ali Numerical Modeling of Combined Transient Radiation and Conduction Heat Transfer in Mineral Wool Insulations [Volume 43, Issue 1, 2012, Pages 51-58]
  • Mirmohammadsadeghi, Sayed Ehsan Mechanistic modeling of cutting forces in milling process by end milling with cutting edges with adjustment angle of 45 degree [Volume 53, Issue 4 (Special Issue), 2021, Pages 2703-2718]
  • Mirnia, Mohammad javad Statistical Analysis and Optimization of Variables Affecting the End Diameter of AISI 304 Steel Tube Produced by Flaring Process [Volume 54, Issue 12, 2023, Pages 2861-2876]
  • Mirsalehi, Seyyed Ehsan Finite Element Simulation of the Trailing Heat Sink's Effect on Welding-Induced Distortion of Al 3105 [Volume 54, Issue 8, 2022, Pages 1945-1968]
  • Mirsalim, S.Mostafa Thermodynamic Analysis Of Variation Of Opening Angles Of Continuous Variable Valve Timing System [Volume 42, Issue 2, 2011, Pages 1-8]
  • Mirzababaie Mostofi, Tohid Study on Performance of Sandwich Panel Structures with Honeycomb Core Subjected to Impulsive Loading [Volume 52, Issue 10, 2021, Pages 2823-2838]
  • Mirzababaie Mostofi, Tohid Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • Mirzababaie Mostofi, Tohid Effect of intense impulsive loading on performance of multi-layered plates [Volume 53, Issue 4 (Special Issue), 2021, Pages 2639-2670]
  • Mirzababaie Mostofi, Tohid Investigation of penetration behavior of monolithic and multi-layered metallic targets subjected to a projectile impact [Volume 53, Issue 4, 2021, Pages 2309-2330]
  • Mirzababaie Mostofi, Tohid Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 4023-4050]
  • Mirzaee, Iraj Investigation of the effect of free-wind velocity on the performance of small-scale vertical axis wind turbine [Volume 53, Issue 3 (Special Issue), 2021, Pages 1709-1728]
  • Mirzaee, Iraj The Effect of Non-Newtonian Behavior on the Transport of Low Density Lipoprotein Particles in the Vortex Region in the Human Carotid Artery [Volume 53, Issue 9, 2021, Pages 4789-4806]
  • Mirzaee, M. Study on Effect of Boundary Conditions in Transient Dynamic Stress Analysis of Thick Cylindrical Shells under Internal Moving Pressure [Volume 50, Issue 5, 2019, Pages 951-960]
  • Mirzaee, Majid The Prediction of Femoral Fracture Location Using Extended Finite Element Method [Volume 53, Issue 8, 2021, Pages 4595-4608]
  • Mirzaee Khalil Abadi, Mohammad Ali Investigation of the Microstructure and Mechanical Properties of Aluminum/Brass Composite Produced by Accumulative Roll-Bonding Process [Volume 51, Issue 5, 2019, Pages 1041-1046]
  • Mirzaei, M. Identification of Tire Force Model Using Experimental Data of a New Scaled Test Rig for Design of Nonlinear Slip Controller [Volume 51, Issue 1, 2019, Pages 187-200]
  • Mirzaei, Mehdi Designing an Optimal Non-Linear Controller for an Active Vehicle Suspension System and Investigating its Effect on Electrical Energy Harvesting [Volume 54, Issue 12, 2023, Pages 2741-2762]
  • Mirzaei, Mehdi Design and Experimental Validation of an Extended State Observer for Estimating of Uncertainties and Unknown Road Input in a Quarter car McPherson Suspension System [Volume 55, Issue 12, 2024, Pages 6-6]
  • Mirzaeinejad, Hossein Online Estimation of Tire Normal Force with Applying Hardware-Software Couple Model [Volume 54, Issue 2, 2022, Pages 333-356]
  • Mirzaeinejad, Hossein Optimal cooperative braking strategy design of regenerative and mechanical braking systems for in-wheel drive electric vehicles [Volume 55, Issue 4, 2023, Pages 433-460]
  • Mirzaluo, Mahdi Experimental Extraction of Young's Modulus of MCF-7 Breast Cancer Cell Using Spherical Contact Models [Volume 53, Issue 12, 2022, Pages 5769-5784]
  • Mirzanejad, Hossein Study of the Motion Behavior of Soft Fiber Reinforced Actuators Based on Fiber Angle [Volume 53, Issue 8, 2021, Pages 4565-4580]
  • Moallemi Khiavi, Negin Thermal Comfort Evaluation for Naturally Ventilated Building Applying an Adaptive Model in Different Cities of Iran [Volume 54, Issue 11, 2023, Pages 2663-2680]
  • Moarefvand, P. Experimental Study of Freeing Stuck Pipe by Changing in Characterization and Additives of Mud Cake [Volume 50, Issue 4, 2018, Pages 863-872]
  • Moattar Husseini, seyed mohammad Coordination of Production/ Order Policy for a Single Vendor Single Buyer chain with stochastic demand [Volume 41, Issue 1, 2010, Pages 77-86]
  • Moavenian, M. Nonlinear Free Vibration in Flexure Beams with an Intermediate Rigid Element and a Tip Mass [Volume 50, Issue 1, 2018, Pages 125-136]
  • Moavenian, Majid Fault Diagnosis Based on Model and Dynamic Behavior of Vehicle Suspension System [Volume 52, Issue 1, 2020, Pages 27-42]
  • Moayedi, Hesam Numerical Analysis of Secondary Flow Strength Induced by Electrohydrodynamic Actuator Through a Smooth Channel [Volume 53, Issue 3, 2021, Pages 1401-1416]
  • Moayedi, Hesam Numerical analysis of the effect of baffle on heat transfer enhancement nanofluid flow over a backward facing step: A correlation for the average Nusselt number [Volume 53, Issue 7, 2021, Pages 4309-4328]
  • Moayedi, Hesam Numerical Analysis of the Effect of Configurations of Double Rotating Cylinders on Heat Transfer Enhancement Hybrid Nanofluid Flow in a Vented Cavity [Volume 54, Issue 1, 2022, Pages 145-168]
  • Moayedi, Hesam Numerical investigation of the effect of DBD plasma actuator on performance enhancement of an air-solid particle cyclone separator [Volume 55, Issue 9, 2023, Pages 1135-1156]
  • Moayyedi, M. K. Reconstruction of Gappy Unsteady Flow Fields using Improved Reduced Order POD Model based on Temporal Decomposition Procedure [Volume 49, Issue 1, 2017, Pages 101-112]
  • Moayyedi, Mohammad Kazem Development of parametric and time dependent reduced order model for diffusion and convection-diffusion problems based on proper orthogonal decomposition method [Volume 53, Issue 7, 2021, Pages 4241-4260]
  • Moayyedi, Mohammad Kazem Modeling of turbulent atmospheric boundary layer and dispersion of solid pollutant particles in an urban area using large eddy simulation [Volume 53, Issue 5, 2021, Pages 2839-2856]
  • Moayyedi, Mohammad Kazem Numerical Simulation of Induced Vibrations Due to Low Frequency Flow Oscillations around Piezoelectric Blades to Design the Best Configuration for Energy Harvesting [Volume 54, Issue 9, 2022, Pages 2009-2040]
  • Moayyedi, Mohammad Kazem Pollutants Transfer Simulation Model Using Combination of Augmented Reality and Computational Fluid Dynamics Techniques on Cell Phone Platform [Volume 55, Issue 1, 2023, Pages 143-156]
  • Moayyedi, Mohammad Kazem Evaluating the fast method based on proper orthogonal decomposition for radiative heat transfer in a participating medium [Volume 54, Issue 9, 2022, Pages 2175-2174]
  • Moayyedi, Mohammad Kazem Stabilization of Reduced Order Model for Convection-Diffusion Problems Based on Dynamic Mode Decomposition at High Reynolds Numbers Using Eddy Viscosity Approach [Volume 54, Issue 11, 2023, Pages 2479-2498]
  • Moayyedi, Mohammad Kazem Development of a Reduced Order Model of Geostrophic Flow based on a Combination of Proper Orthogonal Decomposition and Long-Short Term Memory Network [Volume 54, Issue 11, 2023, Pages 2583-2600]
  • Moazami Goudarzi, Ali Improve the Geometric Profile of the Sprocket Wheel in Power Transmission System of Bicycle for Adjustment the Amplitude of Pedal Acceleration [Volume 46, Issue 2, 2015, Pages 23-33]
  • Mobadersani, Farrokh Numerical analysis of flow and natural convection heat transfer in a circular enclosure heated from bottom utilizing porous layer [Volume 53, Issue 3 (Special Issue), 2021, Pages 1937-1962]
  • Mobadersani, Farrokh Numerical Investigation of Heat Transfer of Water/Nano-Encapsulated Phase Change Materials in a Cavity Including a Rotating Cylinder [Volume 54, Issue 9, 2022, Pages 2175-2194]
  • Mobayen, Saleh A Practical Method for Controlling the Parallel Robot Path Based on the Sliding Mode Method with Fuzzy Adjustable Coefficients [Volume 55, Issue 2, 2023, Pages 257-282]
  • Mobini Bidgoli, Maryam Modeling of the pilot's depth perception algorithm to avoid collisions with obstacles for commercial aircraft landing [Volume 53, Issue 6, 2021, Pages 3497-3510]
  • Modaresi, Mohamad Ali Numerical Investigation of Internal Flow Transition Using Modified γ-Reθ Model [Volume 54, Issue 7, 2022, Pages 1533-1552]
  • Modarres Gheisari, Seyed Mohammad Mohsen Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability [Volume 52, Issue 4, 2020, Pages 1005-1022]
  • Modarres Razavi, Seyed Mohammad Reza Study of Effective Parameter on Distribution of EGR/Blowby Injection in the EF7 Intake Manifold [Volume 44, Issue 1, 2012, Pages 21-33]
  • Moeenfard, H. Nonlinear Free Vibration in Flexure Beams with an Intermediate Rigid Element and a Tip Mass [Volume 50, Issue 1, 2018, Pages 125-136]
  • Moeenfard, H. Design of Optimal Fuzzy Controllers for Semi Active Vibration Suppression of MultiFloor Buildings Based on a Distributed Parameter Model and Magneto Rheological Dampers [Volume 51, Issue 1, 2019, Pages 133-146]
  • Moeenfard, Hamid Dynamic Analysis of Micro -Scale Parallelogram Flexures Using Beam Constraint Model and Modified Strain Gradient Theory [Volume 54, Issue 4, 2022, Pages 821-842]
  • Mofidian, Vahid Numerical Investigation of Channel Cross-section Effect on the Performance of Integrated Thermoelectric Power Generator [Volume 54, Issue 9, 2022, Pages 2195-2212]
  • Moghaddas, Mohammad Hossein Numerical Analysis of Hydrodynamic Performance and Flow around Contra-Rotating Propellers [Volume 44, Issue 1, 2012, Pages 67-77]
  • Moghaddas Ahangari, AliAsghar Using the Propeller Pre-Swirl Stator to Reduce Underwater Vehicle Roll Motion and Increase Propeller Efficiency [Volume 55, Issue 1, 2023, Pages 123-142]
  • Moghimi, Mahdi Experimental and Numerical Study of a Vertical Axis Tidal Current Turbine [Volume 52, Issue 4, 2020, Pages 745-768]
  • Moghimi, Mahdi Investigate of Hydrodynamic and Mass Transfer in the Spacer-Filled Channel of Reverse Osmosis Module [Volume 53, Issue 1 (Special Issue), 2021, Pages 393-410]
  • Moghiseh, Amir Modeling and Analysis of in Line and Cross Flow Vibration of Risers in Drill Ships [Volume 45, Issue 2, 2013, Pages 53-62]
  • Mohaddes Deylami, H. Numerical Investigation Of The Effect of Plasma Actuator on Film Cooling Effectiveness [Volume 49, Issue 3, 2017, Pages 605-616]
  • Mohaddes Deylami, H. Numerical Investigation of Upstream Ramp Effects on the Cooling Performance by Cylindrical and Fan-Shaped Hole [Volume 50, Issue 4, 2018, Pages 883-892]
  • Mohaddes Deylami, H. Numerical Investigation of the Effect of Plasma Actuator on the Film Cooling Effectiveness By Fan-Shaped Hole [Volume 50, Issue 6, 2019, Pages 1213-1228]
  • Mohaddes Deylami, H. Analysis of Corona Wind Effect on Mass Transfer and Energy Consumption in Drying of Moist Object [Volume 51, Issue 2, 2019, Pages 281-296]
  • Mohaddes Deylami, Hamed Numerical Analysis of Secondary Flow Strength Induced by Electrohydrodynamic Actuator Through a Smooth Channel [Volume 53, Issue 3, 2021, Pages 1401-1416]
  • Mohamadnejad, sedigheh e Limit Forming on Density Dislocation of Effect T [Volume 52, Issue 10, 2021, Pages 2709-2724]
  • Mohamamdi, Adel Single and Multi-objective Optimal Control Design by Genetic Programming and Comparison with Riccati Equation Solutions [Volume 52, Issue 12, 2021, Pages 3369-3382]
  • Mohammadalizade, Foruzan REFORMING INTERNAL PRESSURE AND AXIAL FEEDING LOADING PATHS IN HYDROFORMING PROCESS OF CYLINDRICAL STEPPED TUBE IN ORDER TO IMPROVE THE THICKNESS DISTRIBUTION [Volume 48, Issue 4, 2017, Pages 389-400]
  • Mohammad Alizadeh, behrouz Two-three degree of freedom model for Anti Stick-Slip Tool of drill-string [Volume 55, Issue 6, 2023, Pages 737-758]
  • Mohammad Alizadeh, Taban Analysis of Reflux Condensation Phenomena During small Break Loss of Coolant Accident in Bushehr Reactor [Volume 52, Issue 4, 2020, Pages 907-922]
  • Mohammadi, A. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Mohammadi, Abbas A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Mohammadi, Abolfazl Experimental Study of Injecting Water Vapor and Oil Compounds by Nebulizer on the Efficiency and Natural Gas Flame Pollution [Volume 53, Issue 1, 2021, Pages 31-40]
  • Mohammadi, Behzad Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Mohammadi, Bijan Developing a CDM Based Model for Creep-Fatigue Life Assessment of a Gas Turbine Blade [Volume 52, Issue 10, 2021, Pages 2951-2966]
  • Mohammadi, Elham Experimental investigation of heat transfer and pressure drop in perforated ribs in the solar air heater channel [Volume 53, Issue 3 (Special Issue), 2021, Pages 1981-2000]
  • Mohammadi, Esmail Design and Analysis of Gas Ejector in High Altitude Test Facility [Volume 52, Issue 11, 2021, Pages 3015-3032]
  • Mohammadi, Forud Natural Frequency Analysis of Rotating Thin-Walled Beams with Embedded Shape Memory Alloy Wires Subjected to Uniform Temperature Field [Volume 52, Issue 1, 2020, Pages 127-140]
  • Mohammadi, H. Analysis of Static Pull-in Instability and Nonlinear Vibrations of an Functionally Graded Micro-Resonator Beam [Volume 51, Issue 1, 2019, Pages 119-132]
  • Mohammadi, Hadi Effect of 3D-Printing and Compression Molding on Anisotropy of Acrylonitrile Butadiene Styrene Micro Specimen: A Comparative Study Based on Digital Image Correlation [Volume 53, Issue 12, 2022, Pages 5645-5658]
  • Mohammadi, Hassan Free vibration analysis of functionally graded carbon nanotubes reinforced composite skew folded plates using the isogeometric approach [Volume 53, Issue 4, 2021, Pages 2239-2260]
  • Mohammadi, Iman The Effects of Using Porosity Profiles on Performance and Emission of Pollutants in the Porous Media Burners [Volume 45, Issue 1, 2013, Pages 51-61]
  • Mohammadi, Kamal A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Mohammadi, Kamal Experimental Investigation of Water Level Control System of Liquid-Gas Separator in the Fuel Cell [Volume 53, Issue 1 (Special Issue), 2021, Pages 589-604]
  • Mohammadi, Mahya Simulation of the Role of the Anti-Angiogenic Therapy in Fluid Flow Behavior and Macromolecule Transport into a Heterogeneous Solid Tumor [Volume 54, Issue 7, 2022, Pages 1481-1512]
  • Mohammadi, Mehran An investigation on bend curve in the transition zone on web warping of channels with variable width in the flexible roll forming process [Volume 48, Issue 4, 2017, Pages 423-434]
  • Mohammadi, Mehrdad Analytical Study on Effect of Loosening on Nonlinear Vibration Behavior of Bolted Joints [Volume 53, Issue 12, 2022, Pages 5739-5754]
  • Mohammadi, Mohammad Mahdi Numerical and Experimental Modal Analysis of a 400 W Polymer Electrolyte Membrane Fuel Cell [Volume 53, Issue 1, 2021, Pages 101-116]
  • Mohammadi, Mohammad Mahdi Aeroelastic analysis of a thin composite plate, with the effect of general and local geometric defects [Volume 55, Issue 2, 2023, Pages 235-256]
  • Mohammadi, Mohammad Mostafa Design and Simulation of a Dual-State Quartz Resonator Force Sensor [Volume 52, Issue 5, 2020, Pages 1273-1284]
  • Mohammadi, Mohammad Mostafa Experimental Investigation of Electrochemical Finishing Process Using Box-Behnken Design in Response Surface Methodology [Volume 54, Issue 6, 2022, Pages 1409-1422]
  • Mohammadi, Mohammad Mostafa Energy harnessing from water waves by a piezoelectric energy harvester with and without ore-like tip; an experimental study [Volume 55, Issue 10, 2024, Pages 1195-1206]
  • Mohammadi, Mohsen Numerical Study and Sensitivity Analysis in Tubular Heat Exchangers with Perforated Conical Rings Carrying Water-Aluminum Oxide Nanofluid [Volume 54, Issue 1, 2022, Pages 189-210]
  • Mohammadi, Mostafa Design of Solid Rocket Booster based on Collaborative Design Theory [Volume 44, Issue 1, 2012, Pages 57-65]
  • Mohammadi, R. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
  • Mohammadi, Rafat Numerical simulation of water hammer in various fluids due to a fast valve closure [Volume 53, Issue 7, 2021, Pages 4171-4188]
  • Mohammadi, Rafat Numerical Modeling of Diaphragm Dosing Pumps with Fluid-Structure Interaction Analysis [Volume 54, Issue 7, 2022, Pages 1461-1480]
  • Mohammadi, Younes On the Behavior of Carbon and Kevlar Fibers in Cylindrical Composites Subjected to Low-velocity Impact: Experimental Observation and Numerical Analysis [Volume 51, Issue 5, 2019, Pages 1025-1040]
  • Mohammadi, Younes Buckling Analysis of Truncated Conical Sandwich Panel with Porous Functionally Graded Core in Different Thermal Conditions [Volume 52, Issue 10, 2021, Pages 2859-2878]
  • Mohammadi, Zahra Advanced exergy and thermoeconomic analysis of the supercritical carbon dioxide recompression cycle: A comparative study [Volume 53, Issue 5, 2021, Pages 2967-2982]
  • Mohammadi, Zahra Advanced Exergy Investigation of Combined Cycle of Helium Reactor Gas Turbine with Organic Rankine Cycle [Volume 54, Issue 7, 2022, Pages 1553-1574]
  • Mohammadi, Zeinab Prediction of femoral fracture pattern using finite element analysis of dual-energy X-ray absorptiometry -based model [Volume 53, Issue 2 (Special Issue), 2021, Pages 1223-1236]
  • MOHAMMADI, REZA Investigation of initiation and evolution of delamination in glass/epoxy laminated composites using acoustic emission method [Volume 48, Issue 4, 2017, Pages 411-422]
  • Mohammadi-Fesharaki, Mohammad Determination and Reducing of Curvature from Residual Stresses in Cured Shapes by Using Carbon Nanotubes in Unsymmetric Carbon/Epoxy Laminates [Volume 51, Issue 5, 2019, Pages 1107-1018]
  • Mohammadi Hooyeh, H. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]
  • Mohammadikhah, Fazel A Novel Biomass-Driven Cogeneration System for Zero-Energy Buildings [Volume 52, Issue 6, 2020, Pages 1443-1462]
  • Mohammadimehr, m. Nonlinear Buckling Analysis of nonlocal Boron Nitride Timoshenko nano beam based on Modified couple stress theory using DQM [Volume 49, Issue 2, 2017, Pages 241-252]
  • Mohammadimehr, M. Free Vibration of Carbon Nanotube and Boron Nitride Nanotube Double-bonded Modified Couple Stress Theory Timoshenko Micro Beams Under Various Physical Fields [Volume 49, Issue 4, 2018, Pages 709-720]
  • Mohammadi Mehr, M. Buckling and Vibration Analyses of Double-bonded Micro Composite Plates Reinforced by CNTs and BNNTs Based on MSGT [Volume 51, Issue 1, 2019, Pages 79-96]
  • Mohammadjani, Maryam Investigating Bi-Stability of Pressurized Piezoelectric Micro-Plates Based on the Modified Couple Stress Theory [Volume 54, Issue 2, 2022, Pages 357-376]
  • Mohammad-Javad, Kazemzadeh-parsi Large-Amplitude Frequency Analysis of Bi-directional Functionally Graded with Non-Uniform Porous Beams using a Higher Order Shear Deformation Theory [Volume 54, Issue 8, 2022, Pages 1761-1788]
  • Mohammadkari, Behroz Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Mohammadkhani, Farzad Thermodynamic Analysis of a Novel Power, Cooling, Hydrogen and Oxygen Multi-Generation Combined Cycle Based on the Sabalan Geothermal Wells [Volume 53, Issue 1, 2021, Pages 135-154]
  • Mohammad Nabi, S. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
  • Mohammadpor, Omid Design and Manufacturing of a Vibration Absorber for Sound Reduction of a Turboprop Aircraft [Volume 44, Issue 1, 2012, Pages 91-99]
  • Mohammad pour, Eslam Robust Torque Control of Wheeled Mobile Robots with Kinematic Disturbances [Volume 43, Issue 2, 2012, Pages 35-45]
  • Mohammadpourfard, M. Numerical Investigation of Non-Uniform Magnetic Fields Effects on Heat Transfer and Development of Melting- Solidification Processes in an Enclosure [Volume 50, Issue 6, 2019, Pages 1251-1264]
  • Mohammadpourfard, Mousa Modeling the calcium looping process with an emphasis on the bed hydrodynamics and sorbent characteristics [Volume 53, Issue 5, 2021, Pages 2807-2820]
  • Mohammad Sadeghiazad, Mohammad Bagher Investigation of Thermo-Hydraulic Parameters of Reactor Containment due to Cold-Leg Break Accident [Volume 53, Issue 3, 2021, Pages 1591-1606]
  • Mohammadzadeh, K. Numerical Investigation of Water Management in the Cathode and Anode Sides of Proton Exchange Membrane Fuel Cell [Volume 51, Issue 2, 2019, Pages 227-248]
  • Mohammadzadeh, Matin Optimization of Characteristics and Construction of Composite Bipolar Plates of Polymer Fuel Cells [Volume 54, Issue 6, 2022, Pages 1373-1390]
  • Moharrami, R. Measurement of Strain by Digital Shearography with a New Algorithm of Phase Calculation [Volume 50, Issue 1, 2018, Pages 25-32]
  • Moharrami, R. Stress Measurement on Carbon Steel Specimen by Consideration of Magnetic-Barkhausen-Noise [Volume 50, Issue 5, 2019, Pages 1079-1084]
  • Moharrami, Rasoul Experimental Investigation of Electrochemical Finishing Process Using Box-Behnken Design in Response Surface Methodology [Volume 54, Issue 6, 2022, Pages 1409-1422]
  • Mohebbi-Kalhori, Davod Study of Young’s Modulus and Failure Strength of Polyurethane-Based Binary Polymer Composite Structures Based on Stress-Strain Curve for Tissue Engineering Vascular Graft Application [Volume 52, Issue 12, 2021, Pages 3567-3582]
  • Mohebi, Amir Reza Investigating the Effect of Mesh Structure and Mesh Retaining Module on the Rate of Fog Harvesting [Volume 54, Issue 7, 2022, Pages 1575-1586]
  • Mohhades Deylami, H. Experimental Investigation of Flow and Heat Transfer in a Smooth Channel Affected by Vortex Generator with a Punched Hole [Volume 50, Issue 2, 2018, Pages 271-284]
  • Mohsenzadeh, Rasool Experimental Studies on The Tribology Behavior of Ultra-High Molecular Weight Polyethylene /Zeolite Nanocomposite [Volume 53, Issue 10, 2022, Pages 5159-5168]
  • Mojallal agh, S. The Design of a New Rotary Flow Control Valve with a Pressure Compensator for a Turbojet Engine [Volume 50, Issue 2, 2018, Pages 413-424]
  • MojaveryAgah, Hedyeh Developing a new functionally graded lattice structure based on an elliptic unit cell for additive manufacturing and investigation of its properties [Volume 55, Issue 4, 2023, Pages 475-494]
  • Mojaver Zargar, Elmira Planar Navigation Algorithm of Magnetic Dipole Microrobot by Three External Electromagnets [Volume 54, Issue 8, 2022, Pages 1789-1802]
  • Mojra, A. Optimization of Hyperelastic Constitutive Model Coefficients for Soft Tissue by Imperialistic Competitive Algorithm Based on Experimental Data [Volume 49, Issue 2, 2017, Pages 269-278]
  • Mojra, Afsaneh Numerical Study of Microbubble Dynamics Subjected to Ultrasound and Its Effect on Thermal Ablation of Biological Tissue [Volume 54, Issue 11, 2023, Pages 2561-2582]
  • Mokabberi, Abbas A novel objective function for path generation synthesis of the four-bar mechanism with prescribed timing [Volume 55, Issue 12, 2024, Pages 1-1]
  • Mokhtari, A. Airplane Nonlinear Aerodynamic Model Identification in Spin Maneuver by Using Extended Multi Input Approach [Volume 51, Issue 1, 2019, Pages 201-214]
  • Mokhtari, Davood Numerical/Experimental Investigation of the Presence of a Protuberance in a Convergent – Divergent Nozzle in Supersonic Regime to Control the Thrust Vector [Volume 53, Issue 9, 2021, Pages 4887-4904]
  • Mokhtari, Mostafa Investigating the effect of various working fluids in cascade refrigeration cycle integrated with thermal desalination system [Volume 55, Issue 9, 2023, Pages 1063-1088]
  • Mokhtari Shirazabad, Mehdi Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]
  • Molaeimanesh, Gholam Reza Experimental Investigation on the Performance of Hybrid Thermal Management System Based on Water Cooling and Phase Change Material for a Lithium Battery Module of an Electric Vehicle [Volume 51, Issue 4, 2019, Pages 21-30]
  • Molaeimanesh, Gholam Reza Investigation of Temperature Distribution During Dynamic Stress Test on the Surface of Lithium-ion Battery used in an Electric Hybrid Vehicle [Volume 52, Issue 6, 2020, Pages 1497-1512]
  • Molaeimanesh, G. R. Effects of Agglomerate Arrangement on Cathode Catalyst Layer Performance in PEM Fuel Cell [Volume 49, Issue 1, 2017, Pages 203-218]
  • Molaeimanesh, G. R. A Coupled Thermal Model for Refrigeration Cycle and Cabin of the First Produced Vehicle Based on the National Vehicle Platform [Volume 50, Issue 6, 2019, Pages 1159-1174]
  • Molaeimanesh, G.R. Parametric Investigation of the Role of Contributing Factors on Thermal Comfort and Inhaled Air Quality for a Room with Stratum Ventilation [Volume 47, Issue 1, 2015, Pages 59-67]
  • Molahamzezadeh, Ramin Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis [Volume 54, Issue 8, 2022, Pages 1867-1894]
  • Mollaei, Alireza Study and Optimization of Effective Parameters in The Occurrence of Blush Defect in The Plastic Injection Molding Process by Analysis of Variance [Volume 53, Issue 10, 2022, Pages 5293-5308]
  • Mollaei-Dariani, Bijan Experimental Investigation of the Mechanical Properties of Aluminum Sheets Reinforced by Carbon Nanotubes Utilizing Accumulative Roll Bonding Process [Volume 52, Issue 3, 2020, Pages 635-646]
  • Mollahoseini, Zahra Computational Investigation of the Effect of Adhesion between Cancer Cells and Vessel Walls on the Movement of the Cells in Blood Vessels [Volume 51, Issue 6, 2020, Pages 1271-1288]
  • Mollahoseini, Zahra Computational Fluid Dynamics Analysis of Effects of Housing Expansion Angle, Stroke Volume and Path Length of the Fiber Bundles on Function of the Artificial Lung [Volume 53, Issue 11, 2022, Pages 5389-5408]
  • Mollamahdi, M. Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
  • Mollamahdi, M. Numerical Study of the Effects of Speed and Place of Ceiling Fans on Thermal Comfort and Reducing Energy in Office Buildings [Volume 50, Issue 2, 2018, Pages 309-326]
  • Mollamahdi, M. Natural Convection of Turbulent Al2O3-Water Nanofluid with Variable Properties in a Cavity with a Heat Source and Heat Sink on Vertical Walls [Volume 50, Issue 6, 2019, Pages 1237-1250]
  • Mollamahdi, Mahdi Experimental investigation of the effect of the flame holder geometry on flame length and NOx and CO emissions in a non-premixed burnerr [Volume 51, Issue 4, 2019, Pages 141-150]
  • Mollamahdi, Mahdi Experimental Analysis of a Gas-Tank Water Heater with Porous Burner [Volume 52, Issue 6, 2020, Pages 1613-1626]
  • Mollapour, Yousef Simulation of Pitting Corrosion on Gas Turbine Compressor Blade [Volume 53, Issue 10, 2022, Pages 5123-5140]
  • Momenifar, M. Experimental Investigation and Numerical Simulation of the Pressure Force on the Formation of Metallic Bipolar Plate in the Stamping Process [Volume 50, Issue 3, 2018, Pages 505-516]
  • Momenifar, Mohammad A Developed Geometry for Endplate for Uniform Contact Pressure Distribution on the Polymer Exchange Membrane Fuel Cells Active Area [Volume 52, Issue 11, 2021, Pages 3275-3288]
  • Momenimovahed, Ali Numerical Simulation of an Electro-Cyclone for Classification of Micron-Sized Particles [Volume 54, Issue 9, 2022, Pages 1971-1988]
  • Momeni Movahed, Ali Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]
  • Monadjemi, A. Imitation Learning of Complex Behaviors to Humanoid Robots using Evolutionary Optimization of Neural Network of Unit Pattern Generator [Volume 50, Issue 5, 2019, Pages 1123-1136]
  • Montazerin, N. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
  • Moosavi, Ali Numerical Study of the Dynamics of Non-Newtonian Carreau Droplets under Electrowetting Phenomenon [Volume 53, Issue 1 (Special Issue), 2021, Pages 319-338]
  • Moosavian, S. A. A. Extended Multiple Impedance Control of a Space Robot with Flexible Members [Volume 45, Issue 2, 2013, Pages 63-75]
  • Moosavian, Seyed Ali Akbar Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Moosavian, Seyed Ashkan Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]
  • Moqaddas Khorasani, Mahdi Steam generation via solar energy and localizing the light on the pinewood surface [Volume 53, Issue 3 (Special Issue), 2021, Pages 2001-2012]
  • Moradi, B. Brain Trauma in Vehicle Side Crash; Developing a Computational Model for Diffuse Axonal and Subdural Hematoma Injuries [Volume 50, Issue 1, 2018, Pages 91-102]
  • Moradi, Mahmoud Statistical analysis and optimization of tensile strength of Al7075 butt joint produced by friction stir welding and submerged friction stir welding via response surface methodology and desirability approach [Volume 53, Issue 4 (Special Issue), 2021, Pages 2719-2734]
  • Moradi, Shapour Numerical and Experimental Free Vibration Analysis of Post-buckled Beam [Volume 47, Issue 2, 2016, Pages 73-84]
  • Moradi, Shapour Crack identification in postbuckled plates using differential quadrature element method and sequential quadratic programming [Volume 51, Issue 3, 2019, Pages 51-60]
  • Moradi, Shapour Effects of Position and Shape of Cutout on the Axial Buckling Load of Composite Cylindrical Panel [Volume 52, Issue 10, 2021, Pages 2879-2898]
  • Moradi Bastani, Majid Numerical Simulation of Axisymmetric Supersonic Viscous Flow Over Blunt Cone by Using Implicit Fourth Order Finite Difference Method [Volume 42, Issue 2, 2011, Pages 57-67]
  • Moradi Kashkooli, Farshad Image-based numerical model for drug delivery to solid tumors [Volume 53, Issue 5 (Special Issue), 2021, Pages 3187-3200]
  • Moradkhani, Alireza Study of fracture toughness in B4C-TiB2 Nanocomposites with Vickers indentation test method at different loads [Volume 46, Issue 2, 2015, Pages 57-65]
  • Moravej Barzani, H. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
  • Morovvati, Mohammadreza Experimental Investigation of the Mechanical Properties of Aluminum Sheets Reinforced by Carbon Nanotubes Utilizing Accumulative Roll Bonding Process [Volume 52, Issue 3, 2020, Pages 635-646]
  • Mortazavi, S. Two Dimensional Simulation of Film Boiling Heat Transfer in Complex Geometries Using Front Tracking Method [Volume 50, Issue 6, 2019, Pages 1319-1333]
  • Mortazavi, S.S. Three Dimensional Numerical Simulation of a Drop and Drop-to-Wall Interaction under Uniform Electric Field [Volume 50, Issue 4, 2018, Pages 755-766]
  • Mosaddegh, Peiman Experimental and Simulation Study on the Warpage of Polyamide 6 Based on Thermo Mechanical Behavior of Material Using Uniaxial Tensile Test [Volume 52, Issue 5, 2020, Pages 1127-1138]
  • Mosaddegh, Peiman Stress and Vibrational Analysis of Non-Pneumatic Tire and Study the Effect of the Spoke Curvature and Velocity on the Wheel Vibration Using Finite Element Method [Volume 52, Issue 8, 2020, Pages 2213-2230]
  • Mosavi, Mohammad Reza A New Direct Filtering Approach based on the Interactive Multiple Model Method in the Global Positioning System/Inertial Navigation System Integration [Volume 54, Issue 12, 2023, Pages 2725-2740]
  • Mosavi, Seyed Ali Experimental investigation of the infeed method and machining parameters on the tool wear during thread milling [Volume 53, Issue 2 (Special Issue), 2021, Pages 1345-1356]
  • Mosavi Mashhadi, Mahmood Design and Manufacturing of a Vibration Absorber for Sound Reduction of a Turboprop Aircraft [Volume 44, Issue 1, 2012, Pages 91-99]
  • Mosharaf Dehkordi, Mahdi Numerical Simulation of Variable Conductance Heat Pipe with Cold Reservoir by Single Phase Flow Approach [Volume 53, Issue 9, 2021, Pages 4905-4924]
  • Moshayedi, H. Numerical Study of Overlay Welding Effects on Residual Stresses in Girth Welded Steel Pipes [Volume 50, Issue 3, 2018, Pages 479-488]
  • Moslehi, Ghasem A Heuristic for Scheduling Payments in project: Two Different Approaches for Contractor and Client [Volume 42, Issue 3, 2011, Pages 73-85]
  • Moslemi Naeini, H. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
  • Moslemi Naeini, Hassan An investigation on bend curve in the transition zone on web warping of channels with variable width in the flexible roll forming process [Volume 48, Issue 4, 2017, Pages 423-434]
  • Moslemi Naeini, Hassan Numerical and Experimental Investigation of the Effect of Parameters in Shear Spinning Process of a Conic Sample [Volume 52, Issue 3, 2020, Pages 543-554]
  • Moslemi Naieni, Hasan Using Artificial Neural Networks for Estimationof Springback in Cold Roll Forming [Volume 42, Issue 3, 2011, Pages 29-37]
  • Mostafa pour, Amir Numerical and Experimental Investigation the Effect of Pulsating Blankholder on Formability of Aluminum Alloy in Deep Drawing Process [Volume 43, Issue 2, 2012, Pages 57-63]
  • Motaghedi Fard, Rohollah Experimental Study of the Effect of Firing Rate and Equivalence Ratio on Performance of a Porous Metal Radiant Burner [Volume 44, Issue 1, 2012, Pages 35-46]
  • Mottaghi, Sina Control of droplet size in a two-phase microchannel using PID controller: A novel experimental study [Volume 53, Issue 7, 2021, Pages 4279-4292]
  • Mounesan, Masoud Investigation of effective parameters on critical ventilation velocity in underground tunnels [Volume 48, Issue 1, 2016, Pages 41-54]
  • Mousaavi, S. Abolfazl Experimental Study of Preload and Bolt Arrangement on Composite Joint Performance in Megawatt Wind Turbine's Nacelle Cover and Nose Cone [Volume 55, Issue 7, 2023, Pages 837-856]
  • Mousavi, Fateme Comparison of axial and radial soil temperature distribution in U-tube and coaxial borehole heat exchangers [Volume 53, Issue 7, 2021, Pages 4361-4378]
  • Mousavi, Seyed Mahmoud Optimization of Carbon Fiber Reinforced Composite Grinding Process by Response Surface Method [Volume 54, Issue 2, 2022, Pages 481-490]
  • Mousavi, S.M. J. Analysis of Static Pull-in Instability and Nonlinear Vibrations of an Functionally Graded Micro-Resonator Beam [Volume 51, Issue 1, 2019, Pages 119-132]
  • Mousavi, S. S. Numerical Investigation of Upstream Ramp Effects on the Cooling Performance by Cylindrical and Fan-Shaped Hole [Volume 50, Issue 4, 2018, Pages 883-892]
  • Mousavian, seyed amir Tips on Application of Natural Ventilation in Prevalent Buildings in Iran [Volume 53, Issue 3, 2021, Pages 1621-1636]
  • Mousavi-khoshdel, Seyed Morteza Investigation of Temperature Distribution During Dynamic Stress Test on the Surface of Lithium-ion Battery used in an Electric Hybrid Vehicle [Volume 52, Issue 6, 2020, Pages 1497-1512]
  • Mousavi seyedy, seyed reza Investigating the Influence of Geometry on Performance Characteristics of Mounted Cushions in Hydraulic Cylinders [Volume 51, Issue 6, 2020, Pages 1187-1200]
  • Mousavi Tilehboni, S. Esmaeil Numerical Simulation of Dynamic Behavior of Falling Two Adjacent Droplets Using Lattice Boltzmann Method [Volume 48, Issue 3, 2016, Pages 291-304]
  • Mousavizadegan, S. H. Experimental and Numerical Study of a Submerged Submarine Moving Near the Free Surface [Volume 51, Issue 2, 2019, Pages 347-364]
  • Movahedi, A. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-Hole Probe and Neural Network Method [Volume 49, Issue 1, 2017, Pages 67-82]
  • Movahedi, Alireza Far-field Aeroacoustic Noise Prediction of a Tall Standard Building Model by Measuring Unsteady Surface Pressures [Volume 52, Issue 7, 2020, Pages 1885-1904]
  • Movahedian, Bashir Exponential basis functions in solution of time –dependent heat equation in axially layered materials [Volume 46, Issue 1, 2014, Pages 37-46]
  • Movahedin, Mansoureh Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Movahednejad, Ehsan Design, manufacturing, cold and hot-fire test of a liquid subscale engine with single swirl double base injector [Volume 48, Issue 1, 2016, Pages 67-78]
  • Mozafarie, Seyed Shahab Numerical Simulation of Heat Transfer Turbulent Flow for Non-Newtonian Nanofluid in a Double Pipe Helical Heat Exchanger [Volume 53, Issue 1, 2021, Pages 221-240]
  • Mozafari shamsi, Mohsen Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Microchannel with Curved Stirrer by Lattice Boltzmann Method [Volume 52, Issue 11, 2021, Pages 3187-3202]
  • Mozaffari, َAli Effects Of SMA Wires Free Vibration Of Shape Memory Sandwich Panel [Volume 44, Issue 2, 2013, Pages 29-40]
  • Mozaffarian, Mehrdad Investigating the Effect of Mesh Structure and Mesh Retaining Module on the Rate of Fog Harvesting [Volume 54, Issue 7, 2022, Pages 1575-1586]
  • M.Tusi, A. Transient Numerical Analysis of a Tandem Compressor Stage [Volume 51, Issue 2, 2019, Pages 399-412]

N

  • Nabakhteh, Mohammad Amin Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Nabavi, S. M. Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2018, Pages 665-672]
  • Nabipour, M. Designing an Adaptive Control Algorithm for Amirkabir’s Laboratory Attitude Simulator of a Spacecraft [Volume 50, Issue 1, 2018, Pages 163-174]
  • Nadafi D. B., reza Suggestion and Modeling of a Novel Capsular Microrobot with Surface Forces [Volume 42, Issue 3, 2011, Pages 1-8]
  • Naderan tahan, Khosro Analysis of side ratio effect on propagation of ultrasonic guided waves in a bar with rectangular section [Volume 48, Issue 2, 2016, Pages 187-196]
  • Naderan Tahan, Khosro Stress Analysis of Closed Multi Cell Sections under Torsion [Volume 42, Issue 1, 2011, Pages 29-37]
  • Naderi, M. Repair of Free Vibration Behavior of a Cracked Rotating Timoshenko Beam Using a Piezoelectric Patch and Applying Differential Transform Method [Volume 51, Issue 1, 2019, Pages 97-108]
  • Naderi, Pejman Experimental investigation on the geometrical characterization of the cone-jet mode of electrospray of ethanol-water mixtures with different concentrations by high-speed imaging [Volume 55, Issue 5, 2023, Pages 617-642]
  • Nadery, Alireza Using the Propeller Pre-Swirl Stator to Reduce Underwater Vehicle Roll Motion and Increase Propeller Efficiency [Volume 55, Issue 1, 2023, Pages 123-142]
  • Nadery, Alireza Numerical Analysis of Pre-Swirl Stators for Ship Propeller [Volume 54, Issue 11, 2023, Pages 2459-2478]
  • Naeimi, Hooman Solution of the Isotropic Heat Equation Using the Finite Volume Monte Carlo Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 467-482]
  • Naghash, Abolghasem Cutoff Insensitive Implicit Guidance via Flight Path Angle Correction [Volume 51, Issue 3, 2019, Pages 141-150]
  • Naghash, Abolghasem Modeling and linearization of longitudinal dynamics for a flapping wing micro aerial vehicle dragonfly-like with active rigid tail [Volume 53, Issue 6, 2021, Pages 3445-3464]
  • Naghash, Abolghasem A Fast Warehouse Inventory Micro Aerial Vehicle System Equipped with Visual Guidance and Navigation Algorithm [Volume 53, Issue 12, 2022, Pages 5785-5808]
  • Naghashnejad, M. Numerical Investigation of Upstream Ramp Effects on the Cooling Performance by Cylindrical and Fan-Shaped Hole [Volume 50, Issue 4, 2018, Pages 883-892]
  • NAGHDABADI, REZA Determination Of Forming Limit Diageram Using Two Modified Finit Element Models [Volume 48, Issue 4, 2017, Pages 379-388]
  • Naghizadeh, Amirhosein A Study on the Ballistic Behavior of Kevlar Fabric Impregnated with Shear Thickening Fluid Containing Graphene Oxide Additive [Volume 53, Issue 12, 2022, Pages 5725-5738]
  • Najafi, Bahman Effect of Ethanol, Biodiesel and Diesel Blend Fuel on Performance and Pollutants Parameters of Diesel Engine [Volume 43, Issue 1, 2012, Pages 11-17]
  • Najafi, Gholamhassan Energy Management Model for a Standalone Hybrid Microgrid Using a Dynamic Decision-Making Algorithm [Volume 55, Issue 1, 2023, Pages 3-20]
  • Najafi, Moslem Tensile behavior of basalt and carbon fiber reinforced phenolic matrix composites under thermal shock cycles [Volume 44, Issue 2, 2013, Pages 1-9]
  • Najafian, Mojtaba Experimental Study of Injecting Water Vapor and Oil Compounds by Nebulizer on the Efficiency and Natural Gas Flame Pollution [Volume 53, Issue 1, 2021, Pages 31-40]
  • Najjarnezami, A. Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
  • Nakhaei Zeinali, Elham Investigation on flow air concentration effect on distance of the chute spillway aerators [Volume 53, Issue 5 (Special Issue), 2021, Pages 3135-3150]
  • Namadchian, Hosein Numerical simulation of nanofluid flow in an annulus with porous baffles based on combination of Darcy-Brinkman-Forchheimer model and two-phase mixture model [Volume 53, Issue 3 (Special Issue), 2021, Pages 1897-1914]
  • Namar, M.M. Defining Start and Duration of Combustion in HCCI Engines using Mean-Value Method for Control Applications [Volume 50, Issue 6, 2019, Pages 1265-1276]
  • Namdari, Sina Control of Vehicle’s Mixed Longitudinal and Lateral Stability with Engine Dynamics Using Super Twisting Control Algorithm [Volume 53, Issue 2, 2021, Pages 959-978]
  • Nami, H. Energy and Exergy Analysis of a Two-Stage Thermoelectric Used for Heating and Cooling [Volume 50, Issue 2, 2018, Pages 377-384]
  • Naraghi, Mahyar Robust Torque Control of Wheeled Mobile Robots with Kinematic Disturbances [Volume 43, Issue 2, 2012, Pages 35-45]
  • Naraghi, Mahyar Computation algorithms of feasible sets and robust feasible sets for constrained linear time-invariant systems parametrized with orthonormal functions [Volume 51, Issue 3, 2019, Pages 171-180]
  • Nariman-zadeh, Nader Designing Optimum Multi-Domain System by Integrating Bond Graph and Genetic Programming [Volume 53, Issue 2, 2021, Pages 1015-1038]
  • Nariman-zadeh, Nader Single and Multi-objective Optimal Control Design by Genetic Programming and Comparison with Riccati Equation Solutions [Volume 52, Issue 12, 2021, Pages 3369-3382]
  • Nariman-zadeh, Nader Investigating noise reduction in signal analysis in rotary machines fault diagnosing by neural network [Volume 55, Issue 12, 2024, Pages 2-2]
  • Naseri, Reza Theoretical Analysis of Equal Channel Angular Pressing Process by Upper Bound Method and Its Experimental Investigation in Condition of Circular Cross-Section Channel [Volume 53, Issue 8, 2021, Pages 4729-4744]
  • Naseri, S. Theoretical and Experimental Analysis of Asbestos Phenolic Ablative Insulation [Volume 47, Issue 1, 2015, Pages 101-109]
  • Naserian, M. M. Performance Optimization of an Irreversible Brayton Cycle, and Proposing New Definitions for Second Law Efficiency and Exergy [Volume 50, Issue 2, 2018, Pages 385-398]
  • Naserian-Nik, Ali Mohammad Numerical and Experimental Investigation of Non-Newtonian High Viscosity Flow Field in Multi Materials Extrusion Process [Volume 51, Issue 6, 2020, Pages 1363-1380]
  • Naserkhaki, Sadegh Desired Properties of Disc in Numerical Models and Its Influence on Biomechanical Behavior of Lumbar Spine [Volume 52, Issue 1, 2020, Pages 187-202]
  • Nasiri, M. Analytical Solution of Heat Transfer in LaserIrradiated Skin Tissue with Surface Heat Convection Using Dual Phase Lag Model [Volume 50, Issue 2, 2018, Pages 285-294]
  • Nasiri, Mostafa Time-delay compensation for networked hardware-in-the-loop simulation of a flight control system using polynomial prediction [Volume 53, Issue 2 (Special Issue), 2021, Pages 1111-1124]
  • Nasiri, Mostafa Stability Analysis of Predictive Control in Networked Control System Using Switching Control [Volume 53, Issue 10, 2022, Pages 5039-5054]
  • Nasiri, Mostafa Optimal laser control for cancer thermal therapy [Volume 54, Issue 10, 2023, Pages 2333-2350]
  • Nasiri, R. Experimental Investigation of Using Phase Change Materials in Heating System of a Solar Greenhouse [Volume 50, Issue 2, 2018, Pages 327-336]
  • Nasiri, R. Experimental Study of Charge of Paraffin Wax Along with Nanoparticles in an Eccentric Double Tube Heat Exchanger for Storing Energy in a Solar Water Heater [Volume 50, Issue 6, 2019, Pages 1403-1410]
  • Nasri, Azadeh Modeling and Solving of a Bi-Criteria Scheduling Problem for a Cellular Manufacturing System with Sequence-Dependent Cell Setup Times [Volume 42, Issue 3, 2011, Pages 61-72]
  • Nassiri Toosi, A. Numerical Study of a Wall-Impinging jet on a Flat Plate [Volume 49, Issue 1, 2017, Pages 29-42]
  • Nategh, Mohammad javad One-Directional and Elliptical Ultrasonic Vibration Assisted Turning of Ud500 Work-pieces [Volume 44, Issue 2, 2013, Pages 93-101]
  • Navabi, M. Rapid and optimal design of a tail-sitter VTOL ducted fan using a neural network and PSO algorithm [Volume 52, Issue 12, 2021, Pages 3353-3368]
  • Navabi, M. Unstable Aircraft Flight Control Based on Linear Matrix Inequality with Consideration of Control and Saturation Constraints [Volume 53, Issue 2, 2021, Pages 979-992]
  • Navabi Nezhad, S. Investigation into Detection Criteria for Wrinkling in Tube Hydroforming [Volume 49, Issue 4, 2018, Pages 829-838]
  • Navaee, Mohammad Optimal Impulsive Orbital 3D Maneuver with or without Time Constraint [Volume 44, Issue 2, 2013, Pages 53-69]
  • Navidbakhsh, Mahdi Design, Fabrication and Experimental Study of Spiral Microchannel Particle Separator on Centrifugal Microfluidic Platforms [Volume 53, Issue 3, 2021, Pages 1359-1372]
  • Nayebi, Ali Behavior Of FGM Spherical Vessels Under Internal Pressure and Temperature Difference [Volume 47, Issue 2, 2016, Pages 45-52]
  • Nayebi, Elahe Fractional calculus approach for bending of viscoelastic plate using two-variable refined plate theory [Volume 53, Issue 4, 2021, Pages 2287-2308]
  • Nayebi, Peyman Investigation on Mechanical Properties of Polyoxymethylene Reinforced by Carbon Nanotube Using Molecular Dynamics [Volume 53, Issue 8, 2021, Pages 4691-4700]
  • Nazari, A. Buckling Analysis of Designed Fiber Metal Laminate Circular Cylindrical Shell Based on Maximum Tension Fracture Criterion [Volume 51, Issue 1, 2019, Pages 65-78]
  • Nazari, Ahmad Experimental study of CuO/Water nanofluid pool boiling on the copper flat surface and measurement of the critical heat flux [Volume 53, Issue 5, 2021, Pages 3099-3114]
  • Nazari, H. Simulation of Hydrodynamic Behavior of a Conductive Drop Under an Electric Field [Volume 51, Issue 2, 2019, Pages 297-312]
  • Nazari, M. Critical Thickness of a Porous Layer with Respect to Porosity and Its Effect on Heat Transfer Rate [Volume 49, Issue 1, 2017, Pages 171-184]
  • Nazari, M. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
  • Nazari, M. Proposing Immersed Boundary-Lattice Boltzmann-Lattice Spring Algorithm for Simulation of 2-D Deformable Plate in Steady Flow [Volume 50, Issue 4, 2018, Pages 683-696]
  • Nazari, M. Simulation of Two Circular Particles Falling in Vertical Channel: Combination of Immersed Boundary Lattice Boltzmann Method and Discrete Element Method [Volume 51, Issue 2, 2019, Pages 313-328]
  • Nazari, M. Experimental Investigation of the Forced Convection Heat Transfer of Nanofluids in Curved Tubes [Volume 50, Issue 2, 2018, Pages 347-358]
  • Nazari, Mohammadbagher Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Nazari, Mohammad Mahdi The Effect of Stacking Sequence Parameters on the Vibration Behavior of Rotating Hybrid Composite Shaft [Volume 54, Issue 10, 2023, Pages 2277-2296]
  • Nazari, Mohsen Inverse Conduction Heat Transfer in a Channel Filled with Porous Material under Local Thermal Non-Equilibrium Condition [Volume 41, Issue 2, 2010, Pages 29-36]
  • Nazari, Mohsen Immersed Boundary–Thermal Lattice Boltzmann Method with Sharp Interface: Heat Transfer of Non-Newtonian Fluid over a Cylinder [Volume 47, Issue 1, 2015, Pages 69-80]
  • Nazari, Mohsen Thermal Non-Equilibrium Similarity Solution for Nanofluid Boundary Layer in a Porous Medium [Volume 48, Issue 3, 2016, Pages 281-290]
  • Nazari, Mohsen Simulation of fluid penetration with high density ratio in layered porous media with lattice Boltzmann model by using equations of state [Volume 48, Issue 1, 2016, Pages 55-66]
  • Nazari, Mohsen Simultaneous Simulation of Gas Diffusion Layer and Air Channel in a Polymer Electrolyte Membrane Fuel Cell: Pore-Scale Modeling of Water Flooding [Volume 51, Issue 6, 2020, Pages 1289-1304]
  • Nazari, Mohsen Experimental Study of Impacting a Spherical Hydrophobic Particle on an Air-Water Interface [Volume 52, Issue 4, 2020, Pages 943-954]
  • Nazari, Mohsen Experimental Investigation and Visualization of Flow Boiling Heat Transfer in a Vertical Tube Containing Metal Porous Medium [Volume 52, Issue 6, 2020, Pages 1595-1612]
  • Nazari, Mohsen Experimental Study of Premixed Methane-Air Flame Propagation in a Closed Duct with Porous Obstacle [Volume 52, Issue 11, 2021, Pages 3225-3240]
  • Nazari, Mohsen Experimental Study of Foam Generation in a Microfluidic Device [Volume 52, Issue 7, 2020, Pages 1729-1740]
  • Nazari, Mohsen Experimental Study of Surfactant Type Effects on the Foam Stability and Mobility With the Approach of Enhancing Oil Recovery [Volume 53, Issue 1 (Special Issue), 2021, Pages 339-356]
  • Nazari, Mohsen Measurement of subcooled flow boiling heat transfer coefficient in vertical annulus tube [Volume 53, Issue 7, 2021, Pages 4345-4360]
  • Nazari, Mohsen Experimental study of manufacturing and characterization of a flow-focusing microchannel to produce thermoresponsive microparticles for on-demand smart drug delivery [Volume 53, Issue 5 (Special Issue), 2021, Pages 3257-3274]
  • Nazari, Mohsen Control of droplet size in a two-phase microchannel using PID controller: A novel experimental study [Volume 53, Issue 7, 2021, Pages 4279-4292]
  • Nazari, Mohsen Convection Heat transfer Fe3O4/Water in a Square microchannel Under Uniform Heat Flux and Magnetic Field [Volume 53, Issue 9, 2021, Pages 4925-4942]
  • Nazari, Mohsen Investigation of Electro-Osmotic Micro-Pumps Using Electrical Field Gradient and Asymmetric Micro-Electrodes: Numerical Modeling and Experimental Validation [Volume 54, Issue 1, 2022, Pages 101-122]
  • Nazari, Mohsen Robust Control of Integrated Reverse Osmosis Desalination System with Photovoltaic Power Supply [Volume 54, Issue 3, 2022, Pages 567-588]
  • Nazari, Mohsen Investigation of Unsteady Thermal Performance of Multi-Effect Desalination with Thermal Vapor Compression [Volume 54, Issue 7, 2022, Pages 1623-1646]
  • Nazari, Mohsen Sliding Mode Control of Droplet Size in a Microchannel by Adjusting Syringe-Pump Flow: Experimental Study [Volume 54, Issue 10, 2023, Pages 2239-2254]
  • Nazari, Mohsen An Experimental Investigation of Multi-Phase Flow and the Effect of Fracture on Enhanced Oil Recovery in the Porous Medium [Volume 54, Issue 11, 2023, Pages 2499-2518]
  • Nazari, Mostafa Proposing a Finite Duration Cancer Treatment Using Multi-Objective Optimization [Volume 52, Issue 5, 2020, Pages 1365-1376]
  • Nazari, Mostafa Optimization of the Turbines Locating in the Wind Farm [Volume 52, Issue 9, 2020, Pages 2387-2402]
  • Nazari, Mostafa Control of droplet size in a two-phase microchannel using PID controller: A novel experimental study [Volume 53, Issue 7, 2021, Pages 4279-4292]
  • Nazari, Mostafa Investigation of Electro-Osmotic Micro-Pumps Using Electrical Field Gradient and Asymmetric Micro-Electrodes: Numerical Modeling and Experimental Validation [Volume 54, Issue 1, 2022, Pages 101-122]
  • Nazari, Mostafa Robust Control of Integrated Reverse Osmosis Desalination System with Photovoltaic Power Supply [Volume 54, Issue 3, 2022, Pages 567-588]
  • Nazari, Mostafa Investigation of Unsteady Thermal Performance of Multi-Effect Desalination with Thermal Vapor Compression [Volume 54, Issue 7, 2022, Pages 1623-1646]
  • Nazari, Mostafa Sliding Mode Control of Droplet Size in a Microchannel by Adjusting Syringe-Pump Flow: Experimental Study [Volume 54, Issue 10, 2023, Pages 2239-2254]
  • Nazari, Mostafa A novel objective function for path generation synthesis of the four-bar mechanism with prescribed timing [Volume 55, Issue 12, 2024, Pages 1-1]
  • Nazari-Onlaghi, Sina Effect of 3D-Printing and Compression Molding on Anisotropy of Acrylonitrile Butadiene Styrene Micro Specimen: A Comparative Study Based on Digital Image Correlation [Volume 53, Issue 12, 2022, Pages 5645-5658]
  • Nazarzadeh Ansaroudi, Milad Static response of smart beams equipped with extension/shearing piezoelectric patches considering Poisson's effect based on different theories [Volume 48, Issue 4, 2017, Pages 371-378]
  • Nazemian Alaei, Mohsen A Study of the Relationships between Pressure and Deformation of Surface on Wingsuit Performance [Volume 54, Issue 11, 2023, Pages 2681-2702]
  • Nazemnezhad, R. Investigation of surface effects on free torsional vibration of nanobeams [Volume 49, Issue 2, 2017, Pages 309-316]
  • Nazem Nezhad, R. Investigation of Torsional Static Behavior of Nano-rods Embedded in Elastic Medium Considering Surface Energy Effect [Volume 50, Issue 5, 2019, Pages 961-972]
  • Nazeri Boori Abadi, R. Investigation of the Cooling System Condenser Fans Performance at Different Speeds of Subway Train [Volume 51, Issue 2, 2019, Pages 365-380]
  • Nazif, Hamid Reza Analytic Solution of Governing Equations of Heat and Moisture Transfer in a CapillaryPorous Body with Dirichlet Boundary Conditio [Volume 52, Issue 2, 2020, Pages 465-476]
  • Nazmi, Parsa Numerical simulation of Holmboe waves in intrusive gravity current using LES method [Volume 53, Issue 7, 2021, Pages 4261-4278]
  • Nazmi, Parsa Studying Wind Effect on the Hydrodynamic Behavior of Lock-Exchange Density Current [Volume 53, Issue 9, 2021, Pages 4807-4826]
  • Negahban, Mir Hossein Numerical Investigation of Flow Behavior Around Chordwise Morphing NACA 0012 [Volume 51, Issue 6, 2020, Pages 1411-1426]
  • Negahban.B, Ali Experimental Investigation of the Performance of Trailing Edge Noise-Reducing Finlets [Volume 53, Issue 9, 2021, Pages 4827-4846]
  • Nehzati, Hassan State of Charge Estimation for Series-Connected Lithium Battery Pack Using Extended Kalman Filter [Volume 52, Issue 1, 2020, Pages 17-26]
  • Neisy Minaee, Samir Lane Change Path Planning in Emergency Situation Based on Skilled Driver's Performance [Volume 54, Issue 2, 2022, Pages 269-288]
  • Nekoonam, Saeid Simulation of Biceps Femoris Muscle Growth Based on Stretch Using a Multiscale Model [Volume 52, Issue 12, 2021, Pages 3549-3566]
  • Nemati, A. Energy and Exergy Analysis of a Two-Stage Thermoelectric Used for Heating and Cooling [Volume 50, Issue 2, 2018, Pages 377-384]
  • Nemati, Amir Bahador Investigation of Temperature Distribution During Dynamic Stress Test on the Surface of Lithium-ion Battery used in an Electric Hybrid Vehicle [Volume 52, Issue 6, 2020, Pages 1497-1512]
  • Nemati, Bahman Experimental Investigation of Electrochemical Finishing Process Using Box-Behnken Design in Response Surface Methodology [Volume 54, Issue 6, 2022, Pages 1409-1422]
  • Nemati, Milad Reliability Analysis of An Inertial Navigation System and its Active Fault Detection and Isolation Unit [Volume 54, Issue 4, 2022, Pages 805-820]
  • Nemati-Moghadam, Hadi Numerical Simulation of Convective Heat Transfer of Nano-Encapsulated Phase Change Material Slurries in Micro-Channels with Sinusoidal Cavities and Rectangular Ribs [Volume 54, Issue 1, 2022, Pages 169-188]
  • Neshaei, M.A.L. Numerical Investigation of Floating Breakwater Effect on Coastal Waves Attenuation by Smoothed Particle Hydrodynamics Method [Volume 51, Issue 2, 2019, Pages 427-436]
  • Neshat, Elahe Effect of Start of Injection Timing on Waste Heat Recovery Capacity in a Reactivity Controlled Compression Ignition Engine [Volume 53, Issue 1, 2021, Pages 3-16]
  • Neshat, Elahe Investigation on Effects of Water Addition on Performance and Emissions of an n-heptane Fueled Homogeneous Charge Compression Ignition Engine [Volume 53, Issue 3, 2021, Pages 1637-1652]
  • Nezamivand Chegini, Saeed Denoising vibration signals of rotating machines using probability density function, similarity measure and improved thresholding function [Volume 53, Issue 4 (Special Issue), 2021, Pages 2493-2512]
  • Niazmand, H. Study of Slip Effect on Electro-osmotic Micromixer Performance Based on Entropy Index [Volume 49, Issue 3, 2017, Pages 535-548]
  • Niazmand, hamid The Optimum Diameter of Silica- Gel Particles in Adsorption Chillers [Volume 46, Issue 1, 2014, Pages 89-101]
  • Niazmand, Hamid Numerical and Analytical Investigation of Induced Voltage in the Liquid Pressure-Driven Micro-Flows [Volume 42, Issue 2, 2011, Pages 69-77]
  • Niazmand, Hamid Steam generation via solar energy and localizing the light on the pinewood surface [Volume 53, Issue 3 (Special Issue), 2021, Pages 2001-2012]
  • Niazmand, Hamide Study of Effective Parameter on Distribution of EGR/Blowby Injection in the EF7 Intake Manifold [Volume 44, Issue 1, 2012, Pages 21-33]
  • Nikaeen, Golbarg Study of the Motion Behavior of Soft Fiber Reinforced Actuators Based on Fiber Angle [Volume 53, Issue 8, 2021, Pages 4565-4580]
  • Nikandish, P. Thermal Analysis for Diesel Engine Exhaust Manifold with Regard to the Boiling Phenomenon and Compared with Experimental Results [Volume 50, Issue 4, 2018, Pages 711-726]
  • Nikbakht, A. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
  • Nikbakht, Ali Investigating the effect of thermal cycles on the recovery of tensile strength in self-healing composites under impact loading [Volume 55, Issue 2, 2023, Pages 159-178]
  • Nikbin, Kamran Micromechanical Damage Model for Plasticity of ‎Metals to Predict Failure under Shear Loads [Volume 53, Issue 12, 2022, Pages 5679-5702]
  • Nikfar, Majid Experimental Study of the Effect of Firing Rate and Equivalence Ratio on Performance of a Porous Metal Radiant Burner [Volume 44, Issue 1, 2012, Pages 35-46]
  • Niknam, B. Determining Critical Wind Velocity During Fire Accident in Alborz Tunnel [Volume 44, Issue 1, 2012, Pages 47-55]
  • Niknam Sharak, Mohsen Evaluating the fast method based on proper orthogonal decomposition for radiative heat transfer in a participating medium [Volume 54, Issue 9, 2022, Pages 2175-2174]
  • Niknejad, Abbas Nonlinear Vibration and Stability Analysis of Thermally Postbuckled Double-Layered Graphene Sheet [Volume 52, Issue 8, 2020, Pages 2177-2194]
  • Nikoobin, Amin Torque minimization of 2-DOF parallel robot using counterweights and trajectory planning [Volume 53, Issue 4 (Special Issue), 2021, Pages 2409-2422]
  • Nikoobin, Amin A new optimal structural boundary modification algorithm in the multi-objective topology optimization of microgripper [Volume 53, Issue 4, 2021, Pages 2261-2270]
  • Nikouei, Sayed mohammad Experimental Study and Finite Element Simulation of Cutting Tool Temperature in Laser Assisted Machining [Volume 54, Issue 6, 2022, Pages 1341-1356]
  • Niksefat, Reza Optimization of Micro-Textured Tools Geometric Parameters in Turning of 17-4PH Stainless Steel [Volume 54, Issue 10, 2023, Pages 2411-2428]
  • Nikseresht, S. Thermodynamic Investigation of Cationic Surfactants Effect on Oil-Water Interfacial Tension [Volume 50, Issue 2, 2018, Pages 437-444]
  • Nilforooshan Dardashti, Behnam Convection Heat transfer Fe3O4/Water in a Square microchannel Under Uniform Heat Flux and Magnetic Field [Volume 53, Issue 9, 2021, Pages 4925-4942]
  • Nima Shojaee, S. M. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
  • Noghabi, Mohammad A Numerical and Experimental Study on Fatigue Crack Growth of Ti-6Al-4V Specimens in Presence of Tensile Residual Stresses [Volume 55, Issue 4, 2023, Pages 543-554]
  • Noghreabadi, Amin Reza Investigation of Heat Transfer of Non-Newtonian Pseudo-Plastic Fluids in Porous Heat Exchangers [Volume 53, Issue 1, 2021, Pages 241-258]
  • Noghrehabadi, A. Static and Dynamic Pull-in Instabilities Analysis of Partially Affected Clamped Nano Actuators: The Substrate Effect [Volume 50, Issue 5, 2019, Pages 1023-1038]
  • Noie, S.H. The Comparison between Al2O3/water and CuO/water nanofluids experimental heat transfer performance inside triangular duct [Volume 47, Issue 1, 2015, Pages 91-99]
  • Noorian, Mohammad Ali Investigation of Nonlinear Vibrations of A Cantilever Beam with A Transverse Fatigue Crack [Volume 53, Issue 10, 2022, Pages 5069-5084]
  • NoorPoor, A. Energy Simulation and Parametric Analysis of Water Cooled Photovoltaic/Thermal System [Volume 50, Issue 6, 2019, Pages 1361-1374]
  • Nori tabar, Asad Plugging of Metallic Plates under Normal Impact of Deformable Projectiles [Volume 42, Issue 1, 2011, Pages 67-75]
  • Noroozia, Marziye Nonlinear Electro-aero-elastic Vibration Analysis of a Nanocomposite Laminated Trapezoidal Actuator [Volume 53, Issue 2 (Special Issue), 2021, Pages 1137-1158]
  • Norouzi, M. Numerical Study of Brinkman Number Effects on Heated Viscoelastic Fluid Flow in Channel with Sudden Expansion [Volume 51, Issue 2, 2019, Pages 483-496]
  • Norouzi, Mahmood Modeling of the Magnetorheological Damper with Optimization Approach for Magnetic Fluid Molecular Properties [Volume 52, Issue 7, 2020, Pages 1975-1992]
  • Norouzi, Mahmood Analytical Solution of the Heat Transfer in Heterogeneous Composite Conical Shells with Temperature Dependent Conduction Coefficients [Volume 52, Issue 9, 2020, Pages 2581-2596]
  • Norouzi, Mahmood An Analytical and Experimental Study on Dynamics of Newtonian Falling Drops in Inertia Regime with Low Reynolds Numbers [Volume 52, Issue 11, 2021, Pages 3033-3044]
  • Norouzi, Mahmood Experimental Study of Surfactant Type Effects on the Foam Stability and Mobility With the Approach of Enhancing Oil Recovery [Volume 53, Issue 1 (Special Issue), 2021, Pages 339-356]
  • Norouzi, Mahmood Manufacturing and Testing of an Optimized Magneto-Rheological Fluid and Modelling of a Twin Tube Magneto-Rheological Damper Using a Modified Non-Newtonian Model Using Analytical Quasi-Static, Analytical Unsteady, Numerical and Experimental Methods [Volume 53, Issue 3, 2021, Pages 1373-1400]
  • Norouzi, Mahmood Numerical Investigation on the Fluid Elasticity Effect in the Impact of Oblique Drop onto Liquid Film [Volume 54, Issue 1, 2022, Pages 3-30]
  • Norouzi, Mahmood The development of power-law preconditioning approach for simulation of unsteady viscoelastic flows [Volume 55, Issue 3, 2023, Pages 381-406]
  • Norouzi, Mahmood Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Norouzi, Peyman Design, Manufacturing, and Test of a Wearable Device to Monitor Athlete's Body Movements [Volume 54, Issue 3, 2022, Pages 671-686]
  • Nosrati, K. New Design of Cross-flow Fluidized Bed Dryers [Volume 50, Issue 6, 2019, Pages 1351-1360]
  • Nosrati, Reza Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
  • Nosratollahi, M. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
  • Nourazar, Salman Geometric Optimization of Highly Conductive Inserts with Variable Thickness Embedded in a Fin [Volume 52, Issue 9, 2020, Pages 2569-2580]
  • Nourazar, Seyed Salman Experimental Investigation of the Influence of Polymer Electrolyte Membrane Fuel Cells Operating Conditions on Its Performance and Water Management [Volume 52, Issue 11, 2021, Pages 3257-3274]
  • Nourazar, Seyed Salman Simulation, manufacturing and test of a transparent proton-exchange membrane fuel cell [Volume 53, Issue 3 (Special Issue), 2021, Pages 2031-2052]
  • Nourbakhsh, Amireh Simulation of heat transfer in shutdown time of engine by conjugate heat transfer [Volume 51, Issue 4, 2019, Pages 161-170]
  • Nourghasemi, H. Investigation of Step Sweep-Forward Angle Effects on the Hydrodynamic Performance of a Planing hull [Volume 50, Issue 4, 2018, Pages 903-912]
  • Nouri, Ali The Effect of Shear Stress of Liquid-Vapor Interface with and without Mass Transfer on Thermal Performance of a Thermosyphon [Volume 41, Issue 2, 2010, Pages 55-62]
  • Nouri, Ali Numerical Solution of Liquid-Vapor Flow in Variable Cross-Section Ducts by Using Flux Vector Splitting Method [Volume 48, Issue 1, 2016, Pages 1-8]
  • Nourizade, Majede Simulation of a Photocatalytic Reactor Using Finite Volume and Discrete Ordinate Method: A Parametric Study [Volume 53, Issue 1 (Special Issue), 2021, Pages 573-588]
  • Nourmohamdi, Hossein Chatter Suppression in turning by applying a tooling mechanism with the ability to change the tool angles [Volume 55, Issue 4, 2023, Pages 461-474]
  • Nourollahi Golouje, Yavar Numerical analysis of chaotic dynamics in vehicle along with design of chaos controller using fuzzy fast terminal sliding mode control [Volume 53, Issue 4 (Special Issue), 2021, Pages 2539-2556]
  • Nourouzi, S. Investigation of Parameters on the Efficiency of the Fuel cell Based on the Principles of Sealing [Volume 50, Issue 2, 2018, Pages 425-436]
  • N. Toossi, Shahin Global sensitivity analysis of nanomachining parameters by using dynamic scanning thermal microscope [Volume 53, Issue 4, 2021, Pages 2367-2384]

O

  • Ojaghnezhad, Farzaneh Spherical Lame-Type Problem in Second Strain Gradient Theory [Volume 53, Issue 2, 2021, Pages 709-728]
  • Orumiyeh-e, Aida Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat [Volume 53, Issue 9, 2021, Pages 4999-5016]
  • Ostadi, Amirreza A New Method for Calculating the Fracture Strain of Shear and Notched Specimens at Various Temperature and Stress Triaxialities [Volume 54, Issue 8, 2022, Pages 1917-1932]
  • Ovesy, H. Free Vibration of, Functionally Graded Materials Cylindrical Shells on Elastic Foundation under Axial force, Lateral Pressure and Different Boundary Conditions [Volume 50, Issue 5, 2019, Pages 1097-1112]
  • Ozgoli, Hassan Ali Experimental Evaluation of an Energy Efficiency Improvement System in Split Air Conditioner [Volume 52, Issue 2, 2020, Pages 365-380]

P

  • Pahlevaninejad, Nadia The effect of hole on the rectangular vortex generator on thermal-hydrodynamic performance of the minichannel [Volume 53, Issue 7, 2021, Pages 4293-4308]
  • Pak, A. Investigation of Ultrasonic Assisted Electro Discharge Machining with TiO2, Al2O3 and ZnO Nano-Powder [Volume 50, Issue 3, 2018, Pages 541-550]
  • Pakatchian, Mohammad reza Analytical and Experimental Investigation of Frequency of Oscillation Modes in Combustion Chambers of Gas Turbines [Volume 42, Issue 2, 2011, Pages 27-35]
  • Pakravan, Hossein Ali Numerical study of the effect of left coronary artery stenosis on vascular tissue oxygenation [Volume 53, Issue 3 (Special Issue), 2021, Pages 1767-1782]
  • Panahi, Rashid Investigation of Thermal Performance Integrated Collector-Storage Solar Water Heater with Different Reflectors [Volume 45, Issue 1, 2013, Pages 75-82]
  • Panahizadeh, Valiollah Optimization of Additive Manufactured Part Made by Ti6Al4V Alloy to Achieve Best Relative Density and Surface Roughness [Volume 53, Issue 10, 2022, Pages 5169-5184]
  • Parhizkar, Hamid 3D-Simulation and Numerical Analysis of the Local Entropy Generation and Exergy Destruction in a Stator Vane of a Typical Gas Turbine [Volume 52, Issue 11, 2021, Pages 3125-3142]
  • Parhizkar, Hamid Characterization of the Effect of Helicopter Isolated Blade Vortex on Dynamic Stall [Volume 54, Issue 1, 2022, Pages 75-100]
  • Parhizkar Yaghoobi, Mohammad 2-Dimensional Electroelastic Analysis of Piezoelectric Cylinders Using First-Order Shear Deformation and First-Order Electric Potential Theories [Volume 53, Issue 2, 2021, Pages 815-832]
  • Parivar, Amirhossein Thermodynamic Analysis Of Variation Of Opening Angles Of Continuous Variable Valve Timing System [Volume 42, Issue 2, 2011, Pages 1-8]
  • Pariz, Naser Spacecraft Fault Tolerant Attitude Control Design under Control Input Saturation and Uncertainty in Fault Information [Volume 48, Issue 2, 2016, Pages 115-124]
  • Parniyanpour, Mohammad onceptual Design of an Apparatus for Tri-axial Measurement of Lumbar Torques in Isometric Mode [Volume 42, Issue 1, 2011, Pages 45-53]
  • Parsa, H. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
  • Parsaei, Mehran Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Parvin, Nader Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method [Volume 52, Issue 10, 2021, Pages 2759-2778]
  • Parviz, Hadi Uncertainty Propagation Analysis in Free Vibration of Uncertain Composite Plate Using Stochastic Finite Element Method [Volume 52, Issue 12, 2021, Pages 3503-3520]
  • Parvizian, Jamshid Analysis of Residual Material and Machining Error on Straight and Corner Curved Paths in Roughing of WEDM [Volume 45, Issue 2, 2013, Pages 119-137]
  • Parvizian, Jamshid Effects of Roughing Parameters in WEDM on Groove Width and Gap [Volume 47, Issue 2, 2016, Pages 23-34]
  • Parvizian, Jamshid A New Machine Learning Method for Ball Bearing Condition Monitoring Based on Vibration Analysis [Volume 54, Issue 2, 2022, Pages 465-480]
  • Pasandideh Fard, Mahmood Numerical Simulation of Flow Separation in a Thrust Optimized Parabolic Nozzle [Volume 54, Issue 5, 2022, Pages 985-1006]
  • Pasdarshahri, Hadi Experimental Investigation of Combustion Species Radiation to Evaluate Equivalence Ratio in a Surface Flame Burner [Volume 53, Issue 1, 2021, Pages 41-52]
  • Pasdarshahri, Hadi Accurate and faster than real-time simulation of indoor airflow by using fast fluid dynamics [Volume 53, Issue 3 (Special Issue), 2021, Pages 1839-1860]
  • PasdarShahri, Hadi The Importance of the Compatible Combustion and Sub-grid Scale Models on the Simulation of Large-Scale Pool Fire [Volume 52, Issue 9, 2020, Pages 2425-2442]
  • PasdarShahri, Hadi Dynamic Simulation of Desiccant Cooling System with Simultaneously Using Solar and Ground Renewable Energies in Hot-Humid Regions [Volume 53, Issue 3, 2021, Pages 1549-1572]
  • PasdarShahri, Hadi Comparison study of compartment fire simulation with steady laminar flamelet and eddy dissipation model [Volume 53, Issue 5, 2021, Pages 2953-2966]
  • PasdarShahri, Hadi Numerical investigation of compartment fire under maximum and minimum of natural ventilation using flamelet generated manifold combustion model [Volume 53, Issue 5 (Special Issue), 2021, Pages 3335-3350]
  • PasdarShahri, Hadi Numerical Simulation of Compartment Fire with Flamelet Generated Manifold and Comparison with Other Combustion Models [Volume 54, Issue 3, 2022, Pages 493-508]
  • Pashaei, Mohammad Hadi Three-Dimensional Elastic-Plastic Deformation Analysis of Composite Sandwich Panel under Blast Loading [Volume 52, Issue 5, 2020, Pages 1079-1100]
  • Pashaei, Mohammad Hadi Experimental verification of indirect bridge mode shape identification using transmissibility of a passing vehicle [Volume 53, Issue 6, 2021, Pages 3529-2548]
  • Pashaei, Mohammad Hadi Finite Element Modeling of Fluid-Solid-Piezoelectric for Investigating the Ways of Improving the Performance of the Micro Energy Harvester in the Fluid Flow [Volume 54, Issue 1, 2022, Pages 31-54]
  • Pashaei, Naser Experimental and numerical study of energy harvesting from sloshing of a liquid and its performance on shaper machine [Volume 53, Issue 6 (Special Issue), 2021, Pages 3911-3924]
  • Payan, S. Minimization of Rate of Heat Transfer from Rectangular Cavities with Free Convection in Various Aspect Ratios for Finding Characteristics of an Array of Adiabatic Thin Fins by PSO Algorithm [Volume 50, Issue 2, 2018, Pages 295-308]
  • Payeganeh, G. Implementation of Neuro– Fuzzy and Multi-Layer Perceptron System Intelligent Techniques for Main Fault Diagnosis of Rotating Machinery [Volume 45, Issue 2, 2013, Pages 105-118]
  • Payganeh, Gholamhasan Analysis of dynamic instability in sandwich thick beams with flexible functional core subjected to a follower force [Volume 53, Issue 2, 2021, Pages 863-880]
  • Payganeh, Gholamhosin Dynamic Response of Sandwich Panels with Flexible Cores and Elastic Foundation Subjected to Low-Velocity Impact [Volume 45, Issue 2, 2013, Pages 27-42]
  • Pazoki, Marzieh An Image-Based Computational Simulation of Pulmonary Embolism Using Radiological Images [Volume 52, Issue 7, 2020, Pages 1847-1864]
  • Peighambarsoust, Seyed Jamaledin Preparation of Polystyrene-Starch Composite by Melt Extrusion and Evaluation of its Mechanical, Thermal Biodegradation Properties [Volume 52, Issue 10, 2021, Pages 2741-2758]
  • Peighambarsoust, Seyed Jamaledin Removal of Lead Heavy Metal from Wastewater by Crystallization Process and Investigation of the Effective Parameters [Volume 53, Issue 11, 2022, Pages 5349-5366]
  • Peikani, Pantheia Experimental and Numerical Investigation of Film Cooling Effectiveness on Squealer Tip of a Turbine Blade [Volume 53, Issue 3, 2021, Pages 1521-1536]
  • Pilevar, Omid Investigation of Unsteady Thermal Performance of Multi-Effect Desalination with Thermal Vapor Compression [Volume 54, Issue 7, 2022, Pages 1623-1646]
  • PILTAN, EMAD Nonlinear Modeling and Sensitivity Analysis of a Double-Notch Hydraulic Engine Mount [Volume 48, Issue 4, 2017, Pages 347-354]
  • Pirali, P. Numerical Investigation of the Target Geometry Influence on the Glare Damage Caused By Medium-Caliber AP-Projectile [Volume 51, Issue 1, 2019, Pages 53-64]
  • Pirali, Pouya Numerical Investigation of Bending Strength of Composite Sandwich Panel with Grid Core for Use in PEM Fuel Cell Endplates [Volume 55, Issue 6, 2023, Pages 723-736]
  • Pirani, Mohammad The Interaction of the Shock Wave with the Bubble and the Effect of Computational Grid Size on the Problem Simulation with A Fully Coupled Pressure-Based Algorithm [Volume 54, Issue 9, 2022, Pages 2041-2060]
  • Pirbarjasteh, Mohammad Javad Finite Element Simulation and Experimental Verification of HAZ Softening during Welding of Aluminum alloy 7075 [Volume 55, Issue 8, 2023, Pages 1009-1020]
  • Pirdayr, Abouzar Analytical Study on Effect of Loosening on Nonlinear Vibration Behavior of Bolted Joints [Volume 53, Issue 12, 2022, Pages 5739-5754]
  • Pirhadi, Ebrahim Experimental and theoretical investigation of the critical load of U-notched laminated composite specimens under in-plane shear loading [Volume 53, Issue 6, 2021, Pages 3673-3688]
  • Pirkandi, J. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
  • Pirkandi, J. Modeling and analysis of a combined power generation system performance equipped with three electrical energy generators [Volume 49, Issue 1, 2017, Pages 185-202]
  • Pirkandi, J. The Design of a New Rotary Flow Control Valve with a Pressure Compensator for a Turbojet Engine [Volume 50, Issue 2, 2018, Pages 413-424]
  • Pirkandi, Jamasb 3D-Simulation and Numerical Analysis of the Local Entropy Generation and Exergy Destruction in a Stator Vane of a Typical Gas Turbine [Volume 52, Issue 11, 2021, Pages 3125-3142]
  • Pirkandi, Jamasb Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Pirmohammadi, Ali Akbar A Practical Method for Controlling the Parallel Robot Path Based on the Sliding Mode Method with Fuzzy Adjustable Coefficients [Volume 55, Issue 2, 2023, Pages 257-282]
  • Pirmohammadi, Mohsen Numerical Investigation of Fin Position Effect on the Forced Convection Heat Transfer Inside a Channel in Turbulent Flow [Volume 52, Issue 6, 2020, Pages 1627-1640]
  • Poolaei Moziraji, Z. Simultaneous estimation of thermophysical properties and convective boundary conditions of a sample room in Tehran using inverse analysis [Volume 49, Issue 1, 2017, Pages 147-160]
  • Poorveis, Davood Crack identification in postbuckled plates using differential quadrature element method and sequential quadratic programming [Volume 51, Issue 3, 2019, Pages 51-60]
  • Poorveis, Davood Effects of Position and Shape of Cutout on the Axial Buckling Load of Composite Cylindrical Panel [Volume 52, Issue 10, 2021, Pages 2879-2898]
  • Pormahmod Hesar, Nader Optimal Layout of a Typical Telecommunication Center with the Help of Computational Fluid Dynamics and Artificial Neural Networks [Volume 52, Issue 11, 2021, Pages 2969-2984]
  • Pormahmod Hesar, Nader The Effect of Non-Newtonian Behavior on the Transport of Low Density Lipoprotein Particles in the Vortex Region in the Human Carotid Artery [Volume 53, Issue 9, 2021, Pages 4789-4806]
  • Pouranvari, Majid Microstructure and Mechanical Properties of Inconel 738LC Joint by Wide Gap Brazing Using Inconel 718 [Volume 52, Issue 10, 2021, Pages 2629-2646]
  • Pouretemad, Hamidreza Impacts of Social Robots in Education and Rehabilitation of Children with Autism in Iran [Volume 52, Issue 8, 2020, Pages 2329-2354]
  • Pourfallah, Mohsen Simulation of the Heating, Ventilation, and Air Conditioning System with Geothermal Energy and Solar Collector [Volume 52, Issue 2, 2020, Pages 347-364]
  • Pourghasemi, Kamran Investigation on Effect of Multiple Injection on Performance and Emission Reduction in a DI Diesel Engine [Volume 43, Issue 1, 2012, Pages 1-10]
  • Pourgholi, Mehdi Modeling, design and investigation of seat suspension based on negative stiffness structure to improve the vibration environment for helicopter pilots [Volume 53, Issue 4 (Special Issue), 2021, Pages 2513-2538]
  • Pourhashem, Hamed Investigating noise reduction in signal analysis in rotary machines fault diagnosing by neural network [Volume 55, Issue 12, 2024, Pages 2-2]
  • Pourkamali anaraki, ali Effect of Build Orientation and Size on the Amount of the Defects of Stainless Steel 316L Parts Made by Selective Laser Melting Process [Volume 55, Issue 10, 2024, Pages 1219-1232]
  • Pourkamali Anaraki, Ali Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Pourkamali Anaraki, Ali Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Pourmoayed, Alireza Dynamic analysis of cylindrical sandwich shell with orthogonal stiffeners using high-order theory [Volume 53, Issue 4 (Special Issue), 2021, Pages 2473-2492]
  • Pournaderi, P. Simulation of Hydrodynamic Behavior of a Conductive Drop Under an Electric Field [Volume 51, Issue 2, 2019, Pages 297-312]
  • Poursaeidi, Esmaeil Investigation of Crack Growth in Deposited and Perfect Titanium/Titanium Nitride Structure by Molecular Dynamic Simulation [Volume 53, Issue 2, 2021, Pages 833-850]
  • Poursaeidi, Esmaeil Experimental Study of Effects of Hydrogen Embrittlement and Residual Stress on Mechanical Properties of GTD450 [Volume 53, Issue 12, 2022, Pages 5659-5678]
  • PourSaeidi, Esmaeil Simulation of Pitting Corrosion on Gas Turbine Compressor Blade [Volume 53, Issue 10, 2022, Pages 5123-5140]
  • PourSina, M. Determination of Critical Speeds and Divergence Instability Boundary for a High- Speed Double- Helical Planetary Gear System [Volume 51, Issue 1, 2019, Pages 180-186]
  • PourSina, Mehrdad Investigation of Macro- Geometric and Micro- Geometric Modification on the Static Transmission Error and Load Sharing Factor of Helical Gears [Volume 51, Issue 3, 2019, Pages 61-70]
  • Pourtakdust, Seyed hoseyn Strapdown Attitude Estimation Using IMU and Altimeter Integration for Maneuvering Vehicles [Volume 41, Issue 1, 2010, Pages 27-37]
  • Puladrang, Youness Experimental Investigation of Longitudinal Tabs Effects on Film-Cooling Effectiveness of Pea Shaped Holes in Gas Turbine Blades [Volume 52, Issue 4, 2020, Pages 813-832]

Q

  • Qaraati, Tabanmehr Comparison of Support Vector Machine and K-Means Algorithms Performance in Extracting the Real Driving Cycle of Combined Tehran-Amol [Volume 53, Issue 9, 2021, Pages 5017-5036]
  • Qasemi, Hamed On the Behavior of Carbon and Kevlar Fibers in Cylindrical Composites Subjected to Low-velocity Impact: Experimental Observation and Numerical Analysis [Volume 51, Issue 5, 2019, Pages 1025-1040]
  • Qasemi, Sediqeh A Semi-Analytical Method Based on the Mixed Formulation for the Elastic Analysis of a Crack in an Anisotropic Homogeneous Medium [Volume 51, Issue 5, 2019, Pages 1019-1130]
  • Qods, Fathallah Effect of Reversed Accumulative Roll Bonding Process on Microstructure, Mechanical Properties and Properties Inhomogeneity of AA1050 Alloy [Volume 48, Issue 2, 2016, Pages 197-206]

R

  • Raad, Mohammad Numerical simulation of droplet formation in a T-shape microchannel using two-phase level-set method [Volume 53, Issue 3 (Special Issue), 2021, Pages 1815-1838]
  • Rabbani, Yahya Experimental Study on Stability of Magnetorheological Fluid by Using of Fe3O4/ Cellulose Nanoparticles [Volume 52, Issue 10, 2021, Pages 2779-2790]
  • Rabiee, A. Modeling and Numerical Analysis of Sphere Packed Beds for cooling a Fusion Reactor Core [Volume 49, Issue 1, 2017, Pages 127-136]
  • Rabiee, Amir Hossein Real Time Solution for Inverse Heat Conduction Problem in One-Dimensional Plate Utilizing Fuzzy- Proportional–Integral–Derivative Controller [Volume 53, Issue 1, 2021, Pages 303-316]
  • Rabiee, Amir Hossein Process modeling of force behavior in the automatic bovine cortical bone milling process using adaptive neuro-fuzzy inference system [Volume 53, Issue 2 (Special Issue), 2021, Pages 1287-1306]
  • Rabiee, Amir Hossein Investigating the Effect of Isothermal Channel Height on the Vibrational and Thermal Behavior of Elastically-Mounted Cylinder Affected by Unilateral and Bilateral Jet Flow [Volume 54, Issue 3, 2022, Pages 703-724]
  • Rabiee Kerahrudib, Arefe Numerical Modeling of Diaphragm Dosing Pumps with Fluid-Structure Interaction Analysis [Volume 54, Issue 7, 2022, Pages 1461-1480]
  • Rabiei, N. Investigation of the Effect of Longitudinal Distance Between Two Cars on Fuel Consumption and Drag Coefficient [Volume 50, Issue 4, 2018, Pages 893-902]
  • Rad, M. Fabrication and Test of an Axial Wind Turbine with the Most Power During Absorbing Flow Kinetic Energy [Volume 50, Issue 4, 2018, Pages 913-923]
  • Raeesi Estabregh, Ehsan The Worst Response of Mistuned Bladed Disk System Using Genetic Algorithm [Volume 44, Issue 2, 2013, Pages 41-51]
  • Raei, Behrouz Experimental investigation of the effect of pH on the stability and thermal conductivity of metal oxide nanofluids [Volume 55, Issue 7, 2023, Pages 857-874]
  • Raeisifard, Hamed Buckling Analysis of Truncated Conical Sandwich Panel with Porous Functionally Graded Core in Different Thermal Conditions [Volume 52, Issue 10, 2021, Pages 2859-2878]
  • Raeiszadeh, F. Numerical and Experimental Study of Two-phase Flow in Downward vertical Pipe [Volume 51, Issue 2, 2019, Pages 413-426]
  • Raesi, Mohammad Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
  • Raesi, Mohammad Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Rafatnia, Sadra Design and Implementation a Constrained Adaptive Estimation Algorithm for Lowcost Integrated Navigation System in Urban Area [Volume 52, Issue 5, 2020, Pages 1333-1348]
  • Rafatnia, Sadra Design and Experimental Validation of an Extended State Observer for Estimating of Uncertainties and Unknown Road Input in a Quarter car McPherson Suspension System [Volume 55, Issue 12, 2024, Pages 6-6]
  • Rafee, Roholah Investigating the Effects of Loung Chair Fire in a Cinema Hall Using Displacement, Impingement Jet and Stratum Ventilation Systems [Volume 53, Issue 11, 2022, Pages 5573-5594]
  • Rafee, Roholah Experimental Study on the Effect of Numbers of Waves in Vane Type Drift Eliminator on the Collection Efficiency, Pressure Drop and the Wet Cooling Tower Performance [Volume 54, Issue 3, 2022, Pages 531-546]
  • Rafeeyan, M. Free and Forced Whirling Analyses of Rotors with Multiple Unbalanced Discs Under Axial Force [Volume 50, Issue 1, 2018, Pages 175-188]
  • Rafeeyan, Mansoor Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
  • Rafiei, Morteza Analysis of side ratio effect on propagation of ultrasonic guided waves in a bar with rectangular section [Volume 48, Issue 2, 2016, Pages 187-196]
  • Rahgoshay, Seyed Majid Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
  • Rahgoshay, Seyyed Majid Study of Temperature Distribution of H2/O2 Polymer Electrolyte Fuel Cell in Different Operating Conditions [Volume 52, Issue 6, 2020, Pages 1479-1496]
  • Rahgoshay, Seyyed Majid Experimental Investigation of Water Level Control System of Liquid-Gas Separator in the Fuel Cell [Volume 53, Issue 1 (Special Issue), 2021, Pages 589-604]
  • Rahgoshay, Seyyed Majid Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Rahgoshay, S. M. Experimental Study of the New Design 2.5kW Dead-End H2 /O2 PEM Fuel Cell Stack with New Design to Improve Fuel Utilization [Volume 50, Issue 2, 2018, Pages 369-376]
  • Rahi, Abbas Modeling and Analysis of in Line and Cross Flow Vibration of Risers in Drill Ships [Volume 45, Issue 2, 2013, Pages 53-62]
  • Rahi, Abbas Optimal Vibration Reduction of the Flexible Shaft-Disk-Blades System Using a Set of Nonlinear Energy Sink [Volume 52, Issue 12, 2021, Pages 3425-3444]
  • Rahi, Abbas The Effect of Stacking Sequence Parameters on the Vibration Behavior of Rotating Hybrid Composite Shaft [Volume 54, Issue 10, 2023, Pages 2277-2296]
  • Rahimi, A. Numerical Analysis and Optimization of Magnetic Flux Density in the Polishing Process with Magnetorheological Fluid [Volume 50, Issue 3, 2018, Pages 577-588]
  • Rahimi, Fatemeh Control of the Amount of Oncolytic Virus Injection by Considering Time Delay [Volume 53, Issue 2 (Special Issue), 2021, Pages 1125-1136]
  • Rahimi, Gholam Hosein Prediction of the Critical Buckling Load of Grid-Stiffened Composite Plates Using Vibration Correlation Technique [Volume 52, Issue 1, 2020, Pages 221-232]
  • Rahimi, Gholam Hosein Modeling of hyperelastic incompressible behavior of functionally graded material under bending load [Volume 52, Issue 8, 2020, Pages 2045-2062]
  • Rahimi, Gholam Hosein Modeling the Onset and Growth of Damage in Composite Cylinders under Lateral Pressure Loading Between Parallel Plates [Volume 52, Issue 5, 2020, Pages 1101-1126]
  • Rahimi, Gholam Hosein Nonlinear analysis of hyperelastic plates using first-order shear deformation plate theory and a meshless method [Volume 53, Issue 4, 2021, Pages 2331-2346]
  • Rahimi, Masoume The effect of hole on the rectangular vortex generator on thermal-hydrodynamic performance of the minichannel [Volume 53, Issue 7, 2021, Pages 4293-4308]
  • Rahimian, Mohammad Hasan Simulation of Two-Phase Flow and Heat Transfer in a Channel and around a Tube by Lattice-Boltzmann Method [Volume 53, Issue 1 (Special Issue), 2021, Pages 499-516]
  • Rahimi-Esbo, M. Experimental Study of the New Design 2.5kW Dead-End H2 /O2 PEM Fuel Cell Stack with New Design to Improve Fuel Utilization [Volume 50, Issue 2, 2018, Pages 369-376]
  • Rahimi Esboee, Mazaher Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
  • Rahimi Esboee, Mazaher 1-1- Two Phase Simulation of Droplets Motion in Cathode Channels and Manifolds of Polymer Electrolyte Membrane Fuel Cell [Volume 52, Issue 9, 2020, Pages 2479-2490]
  • Rahimi Esboee, Mazaher Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Rahimi Esboee, Mazaher Experimental Investigation of Water Level Control System of Liquid-Gas Separator in the Fuel Cell [Volume 53, Issue 1 (Special Issue), 2021, Pages 589-604]
  • Rahimi Esboee, Mazaher Experimental Investigation of Integrated Power System of Dead-End Proton Exchange Membrane Fuel Cell H2/O2 Stack with Large Active Area and Internal Humidifier [Volume 53, Issue 3, 2021, Pages 1667-1676]
  • Rahimi Sherbaf, Gholamhosein Large deflection of Flexible Functionally Graded Beams with Geometric Non-linearity: Analytical Approach [Volume 43, Issue 2, 2012, Pages 9-17]
  • Rahimzadeh, Mohammad Nonlocal Analysis of Chaotic Vibration, Primary and Super-Harmonic Resonance of Single Walled Carbon Nanotube Considering Thermal Effects [Volume 52, Issue 1, 2020, Pages 233-248]
  • Rahmani, Behroz Digital Control of Nonlinear Control Systems using a PIM Based Fuzzy Method [Volume 44, Issue 2, 2013, Pages 71-81]
  • Rahmani, Hossein Investigation of Quality Factor for Linear Vibrations of Rectangular Micro-plates with Thermoelastic Damping [Volume 53, Issue 2, 2021, Pages 851-862]
  • Rahmani, Khosrow Fabrication and Characterization of NiO/YSZ Composite via Cold Press-Sintering Method [Volume 52, Issue 10, 2021, Pages 2759-2778]
  • Rahmani, Mehdi Double Hyperbolic Sliding Mode Control Based on Unscented Kalman Filter for Three-legged Mobile manipulator [Volume 53, Issue 4, 2021, Pages 2105-2116]
  • Rahmani, Mehdi Fault detection and isolation based on robust Kalman filter for discrete-time systems with stochastic and norm-bounded uncertainties [Volume 53, Issue 6 (Special Issue), 2021, Pages 3825-3840]
  • Rahmani, Mohammad Simulation of a Photocatalytic Reactor Using Finite Volume and Discrete Ordinate Method: A Parametric Study [Volume 53, Issue 1 (Special Issue), 2021, Pages 573-588]
  • Rahmani, Mohammad Computational Fluid Dynamics Analysis of Water-in-Oil Droplet Formation within a Co-Flow Channel [Volume 54, Issue 5, 2022, Pages 1029-1046]
  • Rahmani, Mohsen Buckling Analysis of Truncated Conical Sandwich Panel with Porous Functionally Graded Core in Different Thermal Conditions [Volume 52, Issue 10, 2021, Pages 2859-2878]
  • Rahmani, Omid Investigation of the Free Longitudinal Vibration of Single-Walled Coiled Carbon Nanotubes (SWCCNTs) using Molecular Dynamics Simulation [Volume 51, Issue 3, 2019, Pages 91-100]
  • Rahmani, Omid Free and Forced Vibration Analysis of Kelvin-Voigt Viscoelastic Nanoplate by Using Modified Couple Stress Theory [Volume 52, Issue 1, 2020, Pages 173-186]
  • Rahmani, Omid Free vibration of axially functionally graded nanobeam with an attached mass based on nonlocal strain gradient theory via new ADM numerical method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1159-1178]
  • Rahmani Firoozjaiee, Ali Numerical Investigation of Scour Around a Cylindrical Pier in Laboratory Scale Using Euler-Lagrange Approach [Volume 53, Issue 1 (Special Issue), 2021, Pages 411-426]
  • Rahmani Hanzaki, Ali Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2022, Pages 5851-5866]
  • Rahmati, Abbas Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Rahmati, Ahmad Reza Three-Dimensional Simulation of Helium Gas Flow in an Aluminum Heat Sink with Rectangular Microchannel in Slip Flow Regime [Volume 52, Issue 2, 2020, Pages 477-492]
  • Rahmati, A.R. Simulation of Nanofluid Natural Convection with Presence of Magnetic Field in a Tilted Cavity Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 595-604]
  • Rahmdel, Mahdi Multiobjective Optimization of a Tri-Generation Organic Rankine Cycle for Power, Freshwater and Heat: Suitable Mixture of Three Fluid [Volume 54, Issue 5, 2022, Pages 1125-1148]
  • Rahnama, M. Performance Optimization of Multi-Effect Distillation-Thermal Vapor Compression Desalination Using Genetic Algorithm [Volume 50, Issue 2, 2018, Pages 399-412]
  • Rahnama, M. Design, Manufacturing and Performance Evaluation of a Fixed Focus Scheffler Concentrator in Kerman [Volume 50, Issue 6, 2019, Pages 1303-1318]
  • Rahnama, Mohammad Investigation of Thermal Performance Integrated Collector-Storage Solar Water Heater with Different Reflectors [Volume 45, Issue 1, 2013, Pages 75-82]
  • Raisi, Afrasiab Numerical simulation of mixed convection of Bingham fluid between two coaxial cylinders [Volume 53, Issue 5 (Special Issue), 2021, Pages 3417-3428]
  • Raisi, Afrasiab Numerical Study of Natural Convection Heat Transfer inside a Triangular Cavity with Flexible Sidewalls Containing a Cylindrical Heat Source [Volume 53, Issue 11, 2022, Pages 5461-5484]
  • Raisi, Afrasiyab Nanofluid mixed-convection heat transfer in a ventilated cavity with a baffle [Volume 48, Issue 3, 2016, Pages 257-266]
  • Rajabi, Hamed Experimental and numerical investigations of crack propagation in dragonfly wing veins [Volume 48, Issue 2, 2016, Pages 179-186]
  • Rajabi, iraj Optimal Design of Laminated Sandwich Panels Constrained with Local Bucklings Subjected to Out-of-Plane Load, Using Advanced Genetic Algorithm [Volume 42, Issue 1, 2011, Pages 37-44]
  • Rajabi, Majid Analytical Study on Effect of Loosening on Nonlinear Vibration Behavior of Bolted Joints [Volume 53, Issue 12, 2022, Pages 5739-5754]
  • Rajabi, R. Design and Construction of an Electronic Tiltmeter Calibrator and Estimation of Calibration Uncertainty [Volume 50, Issue 5, 2019, Pages 1113-1122]
  • Rajabiani, E. Numerical Simulation of a Piston-Type Wavemaker using Lattice-Boltzmann Method with Moving Nested Grids [Volume 50, Issue 4, 2018, Pages 799-812]
  • Rajabi Zargarabadi, M. Experimental Analysis of Heat Transfer from Round Jet Impinging to Asymmetric Concave Surface [Volume 50, Issue 6, 2019, Pages 1229-1236]
  • Rajabi Zargarabadi, Mehran Numerical Investigation of the Effect of Coolant Injection Angle on the Pulsed Film Cooling Effectiveness of Square Wave Flow on Flat Plate [Volume 52, Issue 6, 2020, Pages 1641-1658]
  • Rajabi Zargarabadi, Mehran Study of the Flow and Heat Transfer of Pulsed Sinusoidal Impinging Jet at Distances Close To the Concave Surface [Volume 53, Issue 9, 2021, Pages 4943-4960]
  • Rajabpour, Ali Investigation Dynamic Viscosity of Water-Single Wall Carbon Nanotube Nanofluid and Its Effective Factors By Molecular Dynamics Simulation [Volume 51, Issue 4, 2019, Pages 91-100]
  • Rajabzadeh Nobakht, Amirhosein Investigation of Effective Parameters on Dye Removal from Petrochemical Industry Effluents by Fenton and Electro-Fenton Methods [Volume 54, Issue 5, 2022, Pages 947-960]
  • Rajaei, Mohammad An Investigation of Pollutants Emission of Methane-Air Combustion in Porous Burners (PBs), from the view point of numerical modeling [Volume 41, Issue 2, 2010, Pages 1-10]
  • Rajaei, Zahra Modeling and Optimization of Vibration Absorber Beam Combined with Magneto-Electro-Elastic Energy Harvester [Volume 54, Issue 6, 2022, Pages 1223-1248]
  • Rakhsha, Saeed Study of the Flow and Heat Transfer of Pulsed Sinusoidal Impinging Jet at Distances Close To the Concave Surface [Volume 53, Issue 9, 2021, Pages 4943-4960]
  • Rakhshandeh, Ali Investigation of the Microstructure and Mechanical Properties of Aluminum/Brass Composite Produced by Accumulative Roll-Bonding Process [Volume 51, Issue 5, 2019, Pages 1041-1046]
  • Ramezan Behtash, Hamidreza Kinetic modeling of CO2 capture in calcium looping process in the presence of sulfur dioxide based on random pore and fractal-like models [Volume 55, Issue 5, 2023, Pages 659-674]
  • Ramezani, Ali Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Ramezani, Amir Experimental Investigation and Visualization of Flow Boiling Heat Transfer in a Vertical Tube Containing Metal Porous Medium [Volume 52, Issue 6, 2020, Pages 1595-1612]
  • Ramezani, H. Study on Effect of Boundary Conditions in Transient Dynamic Stress Analysis of Thick Cylindrical Shells under Internal Moving Pressure [Volume 50, Issue 5, 2019, Pages 951-960]
  • Ramezani, Mostafa Investigating the Effects of Loung Chair Fire in a Cinema Hall Using Displacement, Impingement Jet and Stratum Ventilation Systems [Volume 53, Issue 11, 2022, Pages 5573-5594]
  • Ramezani Voloojerdi, Mojtaba Experimental investigation of the effect of flapping on the lift and thrust forces of 3D-wing [Volume 53, Issue 3 (Special Issue), 2021, Pages 1697-1708]
  • Ramezanizadeh, Mahdi Experimental Investigation of Longitudinal Tabs Effects on Film-Cooling Effectiveness of Pea Shaped Holes in Gas Turbine Blades [Volume 52, Issue 4, 2020, Pages 813-832]
  • Ramezannejad Azarboni, Habib Nonlocal Analysis of Chaotic Vibration, Primary and Super-Harmonic Resonance of Single Walled Carbon Nanotube Considering Thermal Effects [Volume 52, Issue 1, 2020, Pages 233-248]
  • Ramezannejad Azarboni, Habib Instability and frequency sensitivity analysis of single-walled carbon nanotubes conveying fluid under thermomagnetic field considering the surface effect [Volume 53, Issue 6 (Special Issue), 2021, Pages 3875-3890]
  • Ramezanpour, Ahad Experimental Investigation of Thermal Performance of Pulsating Heat Pipe at Angles Close To the Horizon [Volume 53, Issue 11, 2022, Pages 5445-5460]
  • Ramiar, Abbas Study of Temperature Distribution of H2/O2 Polymer Electrolyte Fuel Cell in Different Operating Conditions [Volume 52, Issue 6, 2020, Pages 1479-1496]
  • Ramin, Hadi Optimization of Segmented Thermoelectric Generator and Calculation of Performance [Volume 45, Issue 1, 2013, Pages 83-91]
  • Ranjbar, Ali Akbar Experimental Analysis of Operating Modes Effect of Open-end and Dead-end on Water Management in H2/O2 Proton-Exchange Membrane Fuel Cells Stack [Volume 51, Issue 6, 2020, Pages 1217-1234]
  • Ranjbar, Ali Akbar Study of Temperature Distribution of H2/O2 Polymer Electrolyte Fuel Cell in Different Operating Conditions [Volume 52, Issue 6, 2020, Pages 1479-1496]
  • Ranjbar, Ali Akbar The effect of hole on the rectangular vortex generator on thermal-hydrodynamic performance of the minichannel [Volume 53, Issue 7, 2021, Pages 4293-4308]
  • Ranjbar, Seyed Faramarz Energy, Exergy and Economic Analysis of a Semi-solar Greenhouse with Experimental Validation [Volume 53, Issue 3, 2021, Pages 1677-1694]
  • Ranjbar, S.Faramarz Energy and Exergy Analysis of a Two-Stage Thermoelectric Used for Heating and Cooling [Volume 50, Issue 2, 2018, Pages 377-384]
  • Ranjbarkohan, Mohammad Effect of Build Orientation and Size on the Amount of the Defects of Stainless Steel 316L Parts Made by Selective Laser Melting Process [Volume 55, Issue 10, 2024, Pages 1219-1232]
  • Ranjbarnodeh, Eslam Finite Element Simulation of the Trailing Heat Sink's Effect on Welding-Induced Distortion of Al 3105 [Volume 54, Issue 8, 2022, Pages 1945-1968]
  • Ranjbarnodeh, Eslam Finite Element Simulation and Experimental Verification of HAZ Softening during Welding of Aluminum alloy 7075 [Volume 55, Issue 8, 2023, Pages 1009-1020]
  • Ranjkesh Adarmanabadi, Sedigheh An experimental investigation of the effect of the type of nanostructured reinforcements on the mechanical and tribological properties of epoxy based nanocomposites [Volume 53, Issue 6 (Special Issue), 2021, Pages 4009-4022]
  • Rasaee, Sajad Geometric Modeling, Upper Bound Analysis and Finite Volume Metal Simulation of Spur Gear Precision Forging [Volume 41, Issue 1, 2010, Pages 67-75]
  • Rasekh, sepehr The Study of the Effect of Floating Platform Rotational Disturbance on theAerodynamic Performance of Offshore Wind Turbine in the Presence of Pitch Control System [Volume 52, Issue 4, 2020, Pages 769-784]
  • Rashed Saghavaz, Fahimeh Analysis of dynamic instability in sandwich thick beams with flexible functional core subjected to a follower force [Volume 53, Issue 2, 2021, Pages 863-880]
  • Rashidi, Negin Numerical Investigation of Heat Transfer of Water/Nano-Encapsulated Phase Change Materials in a Cavity Including a Rotating Cylinder [Volume 54, Issue 9, 2022, Pages 2175-2194]
  • Rasi Marz-Abadi, F. Experimental and numerical investigation of fabric permeability on drag of conventional parachute [Volume 49, Issue 1, 2017, Pages 43-50]
  • Rasoolizadeh Shooroki, A. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
  • Rastegari, Rambod Design and Kinematics Analysis of a Novel Cable Driven Parallel Active Joint [Volume 52, Issue 12, 2021, Pages 3397-3410]
  • Rastegari, Rambod Planar Object Manipulation with Multi Fingers Robot Located on a Moving Hand Under Rolling Grasp Constrains [Volume 53, Issue 2, 2021, Pages 943-958]
  • Rastegarmoghaddam, Mahshad Use of Artificial Intelligence to Identify Adhesive Joints Defects by Using Ultrasonic [Volume 54, Issue 2, 2022, Pages 377-390]
  • Rastgo, Abbas Vibration Analysis of Thin Circular FGM Plate Coupled with Piezoelectric Layers [Volume 41, Issue 1, 2010, Pages 1-8]
  • Rasti, Mehdi Comparing force and cup thickness variations in deep drawing of thick sheets in flat, conical and tractrix dies [Volume 41, Issue 1, 2010, Pages 59-65]
  • RASTI, A. An Experimental Comparison of Dimensional and Geometrical Tolerances in Milled Holes on AISI D2 Steel [Volume 50, Issue 3, 2018, Pages 671-680]
  • Rayegan, Saeed Dynamic Simulation of Desiccant Cooling System with Simultaneously Using Solar and Ground Renewable Energies in Hot-Humid Regions [Volume 53, Issue 3, 2021, Pages 1549-1572]
  • Razavi, S. Analytical investigation on free nonlinear vibration of thin rectangular magneto-electro elastic plate on an onlinear fundation [Volume 49, Issue 2, 2017, Pages 317-324]
  • Razavi, S. On the Free Vibration Analysis of a CNT-Reinforced Plate Bonded to a Magnetoelectroelastic Layer [Volume 50, Issue 1, 2018, Pages 15-24]
  • Razavi, Seyed Esmail Numerical Investigation of Flow Behavior Around Chordwise Morphing NACA 0012 [Volume 51, Issue 6, 2020, Pages 1411-1426]
  • Razavi, Seyed Esmail Investigating the Fluid-Solid Interaction in Incompressible Flow and The Effect of Oscillation Amplitude on Heat Transfer [Volume 53, Issue 9, 2021, Pages 4747-4772]
  • Razavi, SMH Experimental Study of Surfactant Type Effects on the Foam Stability and Mobility With the Approach of Enhancing Oil Recovery [Volume 53, Issue 1 (Special Issue), 2021, Pages 339-356]
  • Razeghi, Seyed Mohammad Jamal Comparison study of compartment fire simulation with steady laminar flamelet and eddy dissipation model [Volume 53, Issue 5, 2021, Pages 2953-2966]
  • Razfar, M. Experimental Investigation and Finite Difference Modeling of Cutting Tool Temperature Distribution During Ultrasonically Assisted Turning [Volume 50, Issue 3, 2018, Pages 657-670]
  • Razfar, Mohammad reza Determination of Tool Temperature in Orthogonal Metal Cutting by Finite Element Method and its Comparison with Experimental Work [Volume 42, Issue 3, 2011, Pages 49-59]
  • Razfar, Mohammad Reza Optimization of Parameters Affecting Magnetic Abrasive Finishing Process Using Response Surface Method [Volume 52, Issue 10, 2021, Pages 2691-2708]
  • Razfar, Mohammad Reza Experimental study of machining residual stresses in plasma-assisted turning process [Volume 53, Issue 4, 2021, Pages 2385-2406]
  • Razfar, Mohammad Reza Experimental Study of the Effect of Initial Surface Roughness on Ball Burnishing Forces and Endurance Limit of AISI 4130 Hardened Steel [Volume 53, Issue 12, 2022, Pages 5627-5644]
  • Razfar, Mohammad Reza Experimental Study and Finite Element Simulation of Cutting Tool Temperature in Laser Assisted Machining [Volume 54, Issue 6, 2022, Pages 1341-1356]
  • Razfar, Mohammad Reza Optimization of Micro-Textured Tools Geometric Parameters in Turning of 17-4PH Stainless Steel [Volume 54, Issue 10, 2023, Pages 2411-2428]
  • Raznahan, H. Study the Effects of Uniform Magnetic Fields and Pressures on the Concentration of Main Species of Methane Combustion [Volume 50, Issue 2, 2018, Pages 337-346]
  • Rebiee, Alireza Improving aerodynamic and aeroacoustic performance of the propeller by synchronic wavy tubercles [Volume 55, Issue 9, 2023, Pages 1157-1172]
  • Rekabi, Fateme Control of a Quadrotor Equipped with Robotic Arm Based on Disturbance Estimation [Volume 54, Issue 4, 2022, Pages 747-768]
  • Rezaee, Mousa Asymptotic Analysis of the Free Vibration of a Cantilever Beam with a Fatigue Crack [Volume 42, Issue 1, 2011, Pages 55-66]
  • Rezaee, Mousa Analysis of the Nonlinear Behavior of the Free Vibration of a Cantilever Beam with a Fatigue Crack Using Lindstedt- Poincare’s Method [Volume 46, Issue 2, 2015, Pages 81-93]
  • Rezaee, Mousa The Effect of Anisotropic Bearings on Dynamics and Stability of the Ball-Spring Auto-balancer [Volume 52, Issue 5, 2020, Pages 1319-1332]
  • Rezaee pajand, Jalil Effect of Different Parameters on Stress Distribution in Anisotropic Plates with Triangular Cutout [Volume 42, Issue 1, 2011, Pages 19-27]
  • Rezaei, Hadi Influence of Pseudo-Boiling Phenomenon and the Mass Flux Ratio on the Dynamics of Transcritical Shear Flame [Volume 53, Issue 9, 2021, Pages 4961-4980]
  • Rezaei, Hamed Comparing Cooling and Lubricating Effects of Different Cutting Fluid Applications in Micromilling Process [Volume 52, Issue 3, 2020, Pages 605-618]
  • Rezaei, M. Numerical Analysis and Optimization of Magnetic Flux Density in the Polishing Process with Magnetorheological Fluid [Volume 50, Issue 3, 2018, Pages 577-588]
  • Rezaei, Mohsen Investigation of Macro- Geometric and Micro- Geometric Modification on the Static Transmission Error and Load Sharing Factor of Helical Gears [Volume 51, Issue 3, 2019, Pages 61-70]
  • Rezaei, Reza An investigation on bend curve in the transition zone on web warping of channels with variable width in the flexible roll forming process [Volume 48, Issue 4, 2017, Pages 423-434]
  • Rezaei, Seyed mehdi Design Enhancement of Mobile Snake Robots Based on Snake Anatomy [Volume 42, Issue 3, 2011, Pages 9-20]
  • Rezaei, Yosef Experimental Comparison of Injection Characteristics of Elliptical and Circular Liquid Jets into an Air Crossflow [Volume 52, Issue 7, 2020, Pages 1773-1792]
  • Rezaeian, Mohsen Computational Modeling of Intraperitoneal Drug Delivery for the Treatment of Peritoneal Carcinomatosis [Volume 54, Issue 3, 2022, Pages 687-702]
  • Rezaei Sangtabi, Ahmad Effect of the Phase Change on the Flow Distribution in the Manifold of Fuel Cell Stack [Volume 52, Issue 9, 2020, Pages 2491-2506]
  • Rezaei Shahreza, A. Manufacturing a Single Ultrasonic Tool Set of Vibrational friction stir welding in Bending and Axial Modes [Volume 50, Issue 3, 2018, Pages 601-618]
  • Rezaie, M. Natural Convection of Turbulent Al2O3-Water Nanofluid with Variable Properties in a Cavity with a Heat Source and Heat Sink on Vertical Walls [Volume 50, Issue 6, 2019, Pages 1237-1250]
  • Rezaie, Mehran A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Rezaie, Mohammad Reza Numerical Investigation on the Fluid Elasticity Effect in the Impact of Oblique Drop onto Liquid Film [Volume 54, Issue 1, 2022, Pages 3-30]
  • Rezapour, Javad Three-Dimensional Numerical Study of Solid Oxide Fuel Cell Performance with Converging Diverging Flow Field [Volume 54, Issue 3, 2022, Pages 589-614]
  • Rezapour Khaneghah, Saeed Control of Vehicle’s Mixed Longitudinal and Lateral Stability with Engine Dynamics Using Super Twisting Control Algorithm [Volume 53, Issue 2, 2021, Pages 959-978]
  • Rezasefat, Mohammad Numerical Analysis of Rolling Contact Fatigue in Common Turnouts of Iran Railway Track [Volume 52, Issue 8, 2020, Pages 2029-2044]
  • Rezasefat, Mohammad Effect of intense impulsive loading on performance of multi-layered plates [Volume 53, Issue 4 (Special Issue), 2021, Pages 2639-2670]
  • Rezazadeh, M. Analytical Solution of Heat Transfer in LaserIrradiated Skin Tissue with Surface Heat Convection Using Dual Phase Lag Model [Volume 50, Issue 2, 2018, Pages 285-294]
  • Rezazadeh, Marzieh Optimal laser control for cancer thermal therapy [Volume 54, Issue 10, 2023, Pages 2333-2350]
  • Rezazadeh, N. Investigation of the Cooling System Condenser Fans Performance at Different Speeds of Subway Train [Volume 51, Issue 2, 2019, Pages 365-380]
  • Rezazadeh, Sajadollah Numerical simulation of droplet formation in a T-shape microchannel using two-phase level-set method [Volume 53, Issue 3 (Special Issue), 2021, Pages 1815-1838]
  • Rezazadeh Movahhed, Sevda Static response of smart beams equipped with extension/shearing piezoelectric patches considering Poisson's effect based on different theories [Volume 48, Issue 4, 2017, Pages 371-378]
  • Rezvani, Amir Hosein Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
  • Rezvani Tavakol, Mahdi The Effect of Graphene Nanoparticles on the Strength of the Sandwich Panel Structure Inspired by the Dragonfly Wing Vein Microstructure under Quasi-Static Loading [Volume 54, Issue 12, 2023, Pages 2821-2842]
  • Rezvan Nejad, Farhad Heat Transfer of Nanofluids in Converging and Diverging Microchannels by Mixture Model [Volume 55, Issue 5, 2023, Pages 595-616]
  • Riahi, Houmayon Modeling and Analysis of in Line and Cross Flow Vibration of Risers in Drill Ships [Volume 45, Issue 2, 2013, Pages 53-62]
  • Riahi, M. Failure Analysis of a Gas Turbine Blade Made of Inconel 738LC Super Alloy [Volume 50, Issue 1, 2018, Pages 103-112]
  • Riahi, M. Experimental Study of Cryogenic Cooling Effect on Tool Wear and Power Consumption During Turning of AISI304 [Volume 50, Issue 3, 2018, Pages 641-657]
  • Riazi, M. Thermodynamic Investigation of Cationic Surfactants Effect on Oil-Water Interfacial Tension [Volume 50, Issue 2, 2018, Pages 437-444]
  • Riyahi Vezvari, Mojtaba Torque minimization of 2-DOF parallel robot using counterweights and trajectory planning [Volume 53, Issue 4 (Special Issue), 2021, Pages 2409-2422]
  • Roghani, Mehran Propagation of Thermomechanical Waves in Annular Disks Made of Functionally Graded Materials under Thermal Shock [Volume 54, Issue 2, 2022, Pages 433-450]
  • Rohani, Abbas Estimation of Stress Concentration Factor of Elliptical Cutout in the Composite Sheets under Tensile Load [Volume 52, Issue 8, 2020, Pages 2081-2092]
  • Rohani Bastami, Abbas Three-dimensional micromechanical modelling of effective elastic properties of graphene nanoplatelet-reinforced polymer nanocomposite using a HFGMC-based homogenization approach [Volume 55, Issue 4, 2023, Pages 495-514]
  • Rosta Abkenar, A. Experimental Investigation of Flow and Heat Transfer in a Smooth Channel Affected by Vortex Generator with a Punched Hole [Volume 50, Issue 2, 2018, Pages 271-284]
  • Rostami, A. Comparison of the Hemodynamic Parameters of Sequential Parallel and Cross Configurations of Coronary Artery in the Rest State [Volume 51, Issue 2, 2019, Pages 497-506]
  • Rostami, Foruzan Computational Fluid Dynamics Analysis of Water-in-Oil Droplet Formation within a Co-Flow Channel [Volume 54, Issue 5, 2022, Pages 1029-1046]
  • Rostami, Javad Numerical Heat Transfer by Nanofluids in a wavy walls Microchannel using Dispersion Method [Volume 51, Issue 4, 2019, Pages 121-130]
  • Rostami, Javad Heat Transfer of Nanofluids in Converging and Diverging Microchannels by Mixture Model [Volume 55, Issue 5, 2023, Pages 595-616]
  • Rostami, Milad A Coupled Finite Element Model to Study on Mechanical and Thermal Features of Resistance Spot Welding Process with Experimental Verification [Volume 51, Issue 5, 2019, Pages 1147-1156]
  • Rostami, Mohsen Energy Analysis and Exergy of the System of Simultaneous Production of Power and Hydrogen with the Excitatory Gasification of Municipal Solid Waste [Volume 53, Issue 11, 2022, Pages 5529-5550]
  • Rostami, Mohsen Numerical investigation of the influence of operating conditions on the performance of PEMFC powered Unmanned Aerial Vehicle (UAV): a statistical approach [Volume 55, Issue 3, 2023, Pages 407-430]
  • Rostami Dehjalali, Sadegh Numerical simulation of Holmboe waves in intrusive gravity current using LES method [Volume 53, Issue 7, 2021, Pages 4261-4278]
  • Rostami Dehjalali, Sadegh Studying Wind Effect on the Hydrodynamic Behavior of Lock-Exchange Density Current [Volume 53, Issue 9, 2021, Pages 4807-4826]
  • Rostami Dibavar, M. Numerical Investigation of Non-Uniform Magnetic Fields Effects on Heat Transfer and Development of Melting- Solidification Processes in an Enclosure [Volume 50, Issue 6, 2019, Pages 1251-1264]
  • Rostamzadeh, Hadi Design and evaluation of a novel bi-evaporator combined power and refrigeration cycle working with various zeotropic mixtures [Volume 53, Issue 5, 2021, Pages 3003-3022]
  • Rouhani, Fatemeh Finite element modeling of shape memory alloy stent insertion in the vessel with consideration of vessel damage [Volume 53, Issue 2 (Special Issue), 2021, Pages 1211-1222]
  • Rouhbakhsh, Mohsen Numerical analysis of shaped charge jet penetration into discrete concrete targets using LS-DYNA and ANSYS-AUTODYN [Volume 53, Issue 6 (Special Issue), 2021, Pages 3953-3970]
  • Rouhi, Hessam Propagation of Thermomechanical Waves in Annular Disks Made of Functionally Graded Materials under Thermal Shock [Volume 54, Issue 2, 2022, Pages 433-450]
  • Rouhi, Hessam Buckling Analysis of Embedded Functionally Graded Graphene Platelet-Reinforced Porous Nanocomposite Plates with Various Shapes Using the P-Ritz Method [Volume 54, Issue 4, 2022, Pages 859-884]
  • Rouhollahi, Amirhossein A numerical investigation on the effect of blade tip shapes on power generation of a horizontal axis wind turbine [Volume 53, Issue 5, 2021, Pages 2791-2806]
  • Rouzegar, J. Experimental Study of Energy Absorption of Square Column under Multi-Indentation Loading [Volume 51, Issue 1, 2019, Pages 33-42]
  • Rouzegar, Seyed Jafar Fractional calculus approach for bending of viscoelastic plate using two-variable refined plate theory [Volume 53, Issue 4, 2021, Pages 2287-2308]
  • Rouzegar, Seyed Jafar State-space approach for bending analysis of functionally graded piezoelectric plate using five-variable refined plate theory [Volume 55, Issue 2, 2023, Pages 213-234]
  • Rrezaei, S. M. Survey, Experiment and Improvement of Micro Actuator Positioning for Precise Grinding by Neural Network [Volume 45, Issue 2, 2013, Pages 87-104]

S

  • Sa'adat, Mohammad Digital Control of Nonlinear Control Systems using a PIM Based Fuzzy Method [Volume 44, Issue 2, 2013, Pages 71-81]
  • Sa'atchi, Ahmad Optimization of the PCGTAW Process Parameters for Corrosion Protection of SDSS Weld Pipes by Using Design of Experiment Technique [Volume 43, Issue 2, 2012, Pages 65-74]
  • Saadat, S. H. M. Experimental Study of the New Design 2.5kW Dead-End H2 /O2 PEM Fuel Cell Stack with New Design to Improve Fuel Utilization [Volume 50, Issue 2, 2018, Pages 369-376]
  • Sabaghzadeghan, Farshad Development of parametric and time dependent reduced order model for diffusion and convection-diffusion problems based on proper orthogonal decomposition method [Volume 53, Issue 7, 2021, Pages 4241-4260]
  • Sabaghzadeghan, Farshad Stabilization of Reduced Order Model for Convection-Diffusion Problems Based on Dynamic Mode Decomposition at High Reynolds Numbers Using Eddy Viscosity Approach [Volume 54, Issue 11, 2023, Pages 2479-2498]
  • Sabbaghi, Mohammad Ali Performance investigation of a novel trigeneration system using solar-biomass energy [Volume 55, Issue 9, 2023, Pages 1089-1112]
  • Saberi, Ali Analysis of Density Wave Oscillations in a Boiling Channel by a New Analytical Model [Volume 53, Issue 3, 2021, Pages 1505-1520]
  • Saberi, Ali Quantifying of viscous fingering instability in porous media [Volume 53, Issue 5, 2021, Pages 2887-2902]
  • Saberi, F. F. Designing an Adaptive Control Algorithm for Amirkabir’s Laboratory Attitude Simulator of a Spacecraft [Volume 50, Issue 1, 2018, Pages 163-174]
  • Saberi, R Investigation of Different Turbulence Models Performance on High-turning Turbine Blade Loading Calculations [Volume 47, Issue 1, 2015, Pages 1-12]
  • Saberi Mehr, Ali Investigation of Performance and Emission Characteristic of a Reactivity Controlled Compression Ignition Engine Fueled By a Mixture of Diesel and Syngas Derived From Biomass Gasification [Volume 53, Issue 1, 2021, Pages 17-30]
  • Sabermanesh, Hamid Reza Effect of adding carbon nanotubes into the matrix material on the buckling behavior of glass/epoxy composite plates: An experimental study [Volume 53, Issue 4 (Special Issue), 2021, Pages 2613-2628]
  • Saber moghadam, ALI Aerodynamic Evaluation and Modification of Tehran International Tower Section Exposed to Annual Winds [Volume 54, Issue 11, 2023, Pages 2519-2542]
  • Sabour, M. Natural Convection Heat Transfer Inside a Square Enclosure with a Flexible Fin [Volume 50, Issue 2, 2018, Pages 233-254]
  • Sabzeh Parvar, M. Airplane Nonlinear Aerodynamic Model Identification in Spin Maneuver by Using Extended Multi Input Approach [Volume 51, Issue 1, 2019, Pages 201-214]
  • Sabzeh Parvar, Mehdi Control of quadrotor by using state-dependent Riccati equation method and analyzing its dynamic performance under wind field [Volume 53, Issue 4 (Special Issue), 2021, Pages 2423-2438]
  • Sabzeh Parvar, Mehdi Modeling of the pilot's depth perception algorithm to avoid collisions with obstacles for commercial aircraft landing [Volume 53, Issue 6, 2021, Pages 3497-3510]
  • Sabzpooshani, Majid Experimental Investigation on the Thermal Resistance of Straight Heat Pipes with Double-Ended Cooling and Middle-Heating at Different Tilt Angles [Volume 53, Issue 1, 2021, Pages 279-302]
  • Sabzpooshani, Majid Investigation on the effect of addition of nano-titanium oxide particles to phase change material in a hybrid system for battery cooling under constant heat flux [Volume 53, Issue 7, 2021, Pages 4379-4396]
  • Sadat, Mohammad ali Design Enhancement of Mobile Snake Robots Based on Snake Anatomy [Volume 42, Issue 3, 2011, Pages 9-20]
  • Sadati, Seyed Hoseyn Experimental Study of Aerodynamic Behavior of NACA0012 Airfoil near the Surface [Volume 54, Issue 1, 2022, Pages 123-144]
  • Sadati, Seyed Hoseyn Design of Fault Tolerant Controller in Flight Control System [Volume 54, Issue 10, 2023, Pages 2297-2314]
  • Sadatpour, Seyed Hamidreza Optimization of S-Shaped Inlet Diffuser for Improvement of Total Pressure Loss and Flow Uniformity [Volume 52, Issue 11, 2021, Pages 3171-3186]
  • Sadatsakak, Seyed Abbas Optimization and Thermodynamic Analysis of the Dual Mixed Refrigerant Process of the Natural Gas Liquefaction [Volume 52, Issue 9, 2020, Pages 2357-2368]
  • Sadatsakak, Seyed Abbas Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Sadedel, Majid Behavior-Based Control of Mecanum Four-Wheeled Omnidirectional Robot [Volume 54, Issue 2, 2022, Pages 309-332]
  • Sadedel, Majid Planar Navigation Algorithm of Magnetic Dipole Microrobot by Three External Electromagnets [Volume 54, Issue 8, 2022, Pages 1789-1802]
  • Sadeghi, Alireza Optimization and Thermodynamic Analysis of the Dual Mixed Refrigerant Process of the Natural Gas Liquefaction [Volume 52, Issue 9, 2020, Pages 2357-2368]
  • Sadeghi, Alireza Simulation and Optimization of Rankine Power Generation Cycle Purposing the Efficiency of Liquefied Natural Gas Cold Exergy [Volume 53, Issue 1, 2021, Pages 117-134]
  • Sadeghi, Alireza Effect of 3D-Printing and Compression Molding on Anisotropy of Acrylonitrile Butadiene Styrene Micro Specimen: A Comparative Study Based on Digital Image Correlation [Volume 53, Issue 12, 2022, Pages 5645-5658]
  • Sadeghi, Arman Influences of Viscoelasticity and Streaming Potential on Surface Reaction Kinetics in Micro reactors [Volume 52, Issue 4, 2020, Pages 893-906]
  • Sadeghi, M. H. An Experimental Comparison of Dimensional and Geometrical Tolerances in Milled Holes on AISI D2 Steel [Volume 50, Issue 3, 2018, Pages 671-680]
  • Sadeghi, Mohammad Hosein Comparing Cooling and Lubricating Effects of Different Cutting Fluid Applications in Micromilling Process [Volume 52, Issue 3, 2020, Pages 605-618]
  • Sadeghi, Mohammad Hosein Laser Cladding of TiC/316LSS and Analysis of Input Parameters using Response Surface Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1269-1286]
  • Sadeghi, Mohammad Hossein Numerical Simulation of the saline water electrolysis process using electromagnetic waves [Volume 55, Issue 11, 2024, Pages 4-4]
  • Sadeghi, Morteza Identification and damage detection of beam-like structure using vibration signals based on simulated model, real healthy state and deep convolutional neural network [Volume 53, Issue 4, 2021, Pages 2193-2216]
  • Sadeghi, Morteza Damage detection of offshore jacket structure using dynamic responses based on simulated model, intact state of real model and deep auto-encoder neural network [Volume 53, Issue 6 (Special Issue), 2021, Pages 3783-3808]
  • Sadeghi, R. Investigation of Nanofluid Flow Field and Conjugate Heat Transfer in a Microchannel Heat Sink with Four Different Arrangements [Volume 51, Issue 2, 2019, Pages 381-398]
  • Sadeghian, H. Imitating Sound Ankle Behavior with a Powered Below-Knee Prosthesis and Validation of its Mechanical Performance [Volume 50, Issue 5, 2019, Pages 1137-1144]
  • Sadeghian, Hadi Experimental and Theoretical Assessment of Mode II Fracture Toughness for Cracked Ductile Specimens with High Strain-Hardening [Volume 53, Issue 10, 2022, Pages 5141-5158]
  • Sadeghian, Majid Evaluation of dissimilar joint properties between UNS S32750 and API X65 [Volume 46, Issue 2, 2015, Pages 45-55]
  • Sadeghiyan, Mahdi Design, Manufacturing, and Test of a Wearable Device to Monitor Athlete's Body Movements [Volume 54, Issue 3, 2022, Pages 671-686]
  • Sadeghzadeh, Arash Assessing short-term storage effects on hydrostatic wind turbine in presence of turbulent wind [Volume 53, Issue 6, 2021, Pages 3431-3444]
  • Sadigh, Mohammad J. Control of a Quadrotor Equipped with Robotic Arm Based on Disturbance Estimation [Volume 54, Issue 4, 2022, Pages 747-768]
  • Sadighi, M. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
  • Sadighi, M. Dynamic Analysis of Asynchronous Low-Velocity Impacts on Laminated Composite Plate [Volume 50, Issue 1, 2018, Pages 47-62]
  • Sadighi, Mojtaba Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Sadighi, Mojtaba Micro-Mechanical Damage Analysis of Al-TiC Particulate Reinforced Composites by Peridynamic Theory [Volume 53, Issue 8, 2021, Pages 4701-4716]
  • Sadighi, Mojtaba Modeling of vibro-acoustic modulation induced by non-linear contact in the Euler-Bernoulli beam using the Fourier spectral element [Volume 53, Issue 6 (Special Issue), 2021, Pages 3809-3824]
  • Sadighi, Mojtaba Uncertainty Quantification in the Assessment of the Characteristics of the Electromechanical Impedance Spectrum of a Rectangular Piezoelectric Patch [Volume 54, Issue 10, 2023, Pages 2351-2376]
  • SADOGH, SEYYED ALI Evaluation of experimental and theoretical bending behavior of shape memory actuator [Volume 48, Issue 4, 2017, Pages 355-362]
  • Sadooghi, Ala Numerical investigation of ethanol and acetone spray injection into gaseous environment [Volume 53, Issue 5 (Special Issue), 2021, Pages 3213-3226]
  • Sadri, Shirzad Determination of convective heat transfer coefficient in human femur bone drilling in the presence of normal saline and evaluation of effective parameters [Volume 55, Issue 5, 2023, Pages 557-576]
  • Sadripour, S. Energy and Exergy Analyzes and Evaluation of Traditional Flatbread Bakeries [Volume 50, Issue 6, 2019, Pages 1389-1402]
  • Sadripour, S. Numerical Study of the Effects of Speed and Place of Ceiling Fans on Thermal Comfort and Reducing Energy in Office Buildings [Volume 50, Issue 2, 2018, Pages 309-326]
  • Sadripour, Soroush Analysis of Different Heat Transfer Mechanisms Portions during Traditional Flatbreads Baking to Improve Quality of Breads and Reducing Fuel Consumption [Volume 52, Issue 11, 2021, Pages 3307-3324]
  • Sadri Qahfarrokhi, Arash Investigation to set the type of pre-chamber fuel system in heavy gas engine HIMSEN 35/40 [Volume 53, Issue 5, 2021, Pages 2935-2952]
  • Sadrvaghefi, SeyyedAli Experimental investigation and performance comparison of two types of microchannel and Fin-tube condensers with R407c refrigerant in compression refrigeration cycle [Volume 55, Issue 5, 2023, Pages 577-594]
  • Saedodin, Seifollah Investigation Dynamic Viscosity of Water-Single Wall Carbon Nanotube Nanofluid and Its Effective Factors By Molecular Dynamics Simulation [Volume 51, Issue 4, 2019, Pages 91-100]
  • Saedodin, Seyfolah Study of the Flow and Heat Transfer of Pulsed Sinusoidal Impinging Jet at Distances Close To the Concave Surface [Volume 53, Issue 9, 2021, Pages 4943-4960]
  • Saeedi, A. Study the Effects of Uniform Magnetic Fields and Pressures on the Concentration of Main Species of Methane Combustion [Volume 50, Issue 2, 2018, Pages 337-346]
  • Saeedi, A. Effects of Adding Gaseous Soot and Methane Incomplete Combustion Products on Detailed Chemical Kinetics Combustion of Methane and Pollutants [Volume 50, Issue 6, 2019, Pages 1277-1288]
  • Saeedi, Ali Numerical modeling of magnetic field effects on flame shape, temperature and CO2, CO and NO emission of laminar diffusion combustion of methane [Volume 51, Issue 4, 2019, Pages 81-90]
  • Saeedi, Ali Numerical Investigation of the Performance of Hydrogen Production Process by Production Gas Recirculation [Volume 53, Issue 1 (Special Issue), 2021, Pages 623-638]
  • Saeedi, Ali Numerical Investigation of Steam Methane Reforming over Ni- and Rh-based Catalysts to Produce Hydrogen, Syngas and Reduce Surface Coverage [Volume 54, Issue 7, 2022, Pages 1587-1606]
  • Saeedi, Hamid Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
  • Saeedi, Mohammad Numerical Investigation of Hybrid Wick Structure Effect on Thermal Performance of a Thin Flat Heat Pipe [Volume 53, Issue 11, 2022, Pages 5485-5504]
  • Saeedi, Mostafa Sensitivity analysis of fracture behavior in carbon-epoxy composite at different displacement rates under mode I tensile loading by regression analysis [Volume 53, Issue 4 (Special Issue), 2021, Pages 2671-2686]
  • Saeedifar, M. Acoustic Emission based Methodology to Evaluate the Fracture Toughness in carbon/epoxy composites [Volume 49, Issue 2, 2017, Pages 379-386]
  • Saeedifar, Milad Investigation of initiation and evolution of delamination in glass/epoxy laminated composites using acoustic emission method [Volume 48, Issue 4, 2017, Pages 411-422]
  • Saeedifar, Milad Numerical and Experimental Investigations on Fatigue Behavior of Carbon/Epoxy Laminates Toughened by Nanofibers [Volume 54, Issue 12, 2023, Pages 2899-2916]
  • Saeidi, H. Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
  • Saeidi Mostaghim, Mohammad Hosein Pattern Recognition of Unbalanced Rigid Rotor Bearing Forces [Volume 54, Issue 6, 2022, Pages 1249-1270]
  • Saeidi nezhad, Ali Experimental Study of the Downstream Flow of a Cylinder with Three Different Cross Sections by Hot Wire Anemometry [Volume 46, Issue 1, 2014, Pages 13-23]
  • Safar, Mahmoud Diagnostical and observational analysis of clear air turbulence over the middle east and Iran [Volume 53, Issue 7, 2021, Pages 4203-4220]
  • Safari, A. Comparison of the Effects of Shot Blasting and Sandblasting Processes on the Strength of the Aluminum Adhesive Bonded Joints [Volume 50, Issue 5, 2019, Pages 1015-1022]
  • Safari, A. Study on the Effects of Sanding on the Strength of the Adhesive Joints [Volume 50, Issue 3, 2018, Pages 619-626]
  • Safari, M. Time-Dependent Analysis and Creep Life Prediction of Rotating Hollow Cylinders using Theta Projection Concept and Larson Miller Parameter [Volume 49, Issue 4, 2018, Pages 673-684]
  • Safari, Mahdi Process modeling of force behavior in the automatic bovine cortical bone milling process using adaptive neuro-fuzzy inference system [Volume 53, Issue 2 (Special Issue), 2021, Pages 1287-1306]
  • Safari, Mahdi Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
  • Safari, Omid Finite Element Modeling of a Novel Magnetic Shape Memory Alloy Based Energy Harvester Using a Corrugated Beam and Investigating the Effective Parameters [Volume 53, Issue 2, 2021, Pages 799-814]
  • Safari Pur, Mohammad Hasan Investigation of Thermal Performance Integrated Collector-Storage Solar Water Heater with Different Reflectors [Volume 45, Issue 1, 2013, Pages 75-82]
  • Safarpour, H. Free Vibration Analysis of a Functionally Graded Cylindrical Nanoshell Surrounded by Elastic Foundation Based on the Modified Couple Stress Theory [Volume 49, Issue 4, 2018, Pages 721-730]
  • Safarpour, Pedram Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability [Volume 52, Issue 4, 2020, Pages 1005-1022]
  • Safavi, Seyed Alireza Investigation of 2D Melting Process within a Porous Medium Considering Local Thermal Nonequilibrium Condition in the Presence of Sinusoidal Boundary Condition by Lattice Boltzmann Method [Volume 54, Issue 5, 2022, Pages 1181-1198]
  • Safavinejad, Ali Evaluating the fast method based on proper orthogonal decomposition for radiative heat transfer in a participating medium [Volume 54, Issue 9, 2022, Pages 2175-2174]
  • Safavinejad, َAli Introduction of an improved Harmony Search Optimization Algorithm for investigating of Airfoil Parameterization Methods and Aerodynamics optimization [Volume 47, Issue 1, 2015, Pages 13-31]
  • Safdarian, R. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
  • Saffaie, Seyed hasan Solution of Radiative Transfer Equation in Two-Dimensional Media with Real Gas through Zone Method and Box Model [Volume 41, Issue 2, 2010, Pages 11-20]
  • Saffar, S. Increasing the Frequency Band of Sound Absorption for Flat Multi-Layered Absorbers Consisting of Porous Material, Perforated Panel and Air-Gap [Volume 50, Issue 1, 2018, Pages 219-230]
  • Saffar Avval, Majid Experimental Investigation of Heat Transfer Enhancement by Acoustic Streaming in a Closed Cylindrical Enclosure [Volume 44, Issue 1, 2012, Pages 11-20]
  • Saffar-Avval, M. Sensitivity Analysis of Fluid Flow to Slip Coefficient Using Lattice Boltzmann Method [Volume 49, Issue 3, 2017, Pages 549-556]
  • Saffar-Avval, Majid Numerical Heat Transfer by Nanofluids in a wavy walls Microchannel using Dispersion Method [Volume 51, Issue 4, 2019, Pages 121-130]
  • Saffari, Hamid An Empirical Study on Dropwise Condensation Occurred on Surfaces Hydrophobized Using a Single-Step Electrodeposition [Volume 52, Issue 6, 2020, Pages 1397-1412]
  • Safipour, Sayed Amir Investigation of Interlaminar Mode-I Fracture Toughness of Corrugated Composite Plates [Volume 54, Issue 2, 2022, Pages 415-432]
  • Safizadeh, M.S. Gear wear’s fault diagnosis in tail gearbox of helicopter: using K nearest neighbor recognition pattern [Volume 49, Issue 2, 2017, Pages 341-350]
  • Saghafi, Hamed Numerical and Experimental Investigations on Fatigue Behavior of Carbon/Epoxy Laminates Toughened by Nanofibers [Volume 54, Issue 12, 2023, Pages 2899-2916]
  • Saghafi, Hesam Numerical and Experimental Investigations on Fatigue Behavior of Carbon/Epoxy Laminates Toughened by Nanofibers [Volume 54, Issue 12, 2023, Pages 2899-2916]
  • Sahami poor Dehghan, M. Experimental Study in Drilling Composite Pipes Manufactured by Filament Winding Process Using Full Factorial Design Method [Volume 50, Issue 3, 2018, Pages 489-504]
  • Saidi, Ali Reza Nonlinear Vibrations of Graphene Reinforced Pipes Conveying Fluid [Volume 53, Issue 8, 2021, Pages 4483-4500]
  • Saidi, M. Numerical Study on the Effect of Air Diffuser Angle on the Flow Field and Contaminant Dispersion in a Ventilated Room [Volume 50, Issue 4, 2018, Pages 873-882]
  • Saidi, M. H. Al2O3-water Nanofluid in a Square Cavity with Curved Boundaries [Volume 49, Issue 3, 2017, Pages 567-580]
  • Saidi, M. H. Numerical Study on the Effect of Air Diffuser Angle on the Flow Field and Contaminant Dispersion in a Ventilated Room [Volume 50, Issue 4, 2018, Pages 873-882]
  • Sajadi, Hasan Analytical Solution of Heat Transfer in a Cone Made of Functionally Graded Material [Volume 53, Issue 1 (Special Issue), 2021, Pages 539-552]
  • Sajjadi, Hasan Investigation of 3-D Nanofluid Natural Convection in Presence of Magnetic Field using Double MRT Lattice Boltzmann method [Volume 51, Issue 4, 2019, Pages 111-120]
  • Sajjadi, Hasan Investigation of the Effect of Ventilation System Inlet Location on Particle Motion in a Room Using Multi Relaxation Time-Lattice Boltzmann Method [Volume 53, Issue 3, 2021, Pages 1457-1468]
  • Sajjadinia, Amir Hesam Modeling and Sliding Mode Control of Rotating Helical Pump [Volume 52, Issue 8, 2020, Pages 2277-2292]
  • Salahshoor, Esmaeil Leader Following and Multiple Obstacle Avoidance of Autonomous Vehicle with Steering-Wheel and Driving-Wheel Torques Using Path Planning and Model Predictive Control [Volume 55, Issue 12, 2024, Pages 4-4]
  • Salamati-Khiavi, Sohrab Experimental Determination of the Modified Drucker-Prager Cap Constitutive Model for 92 Percent Alumina Powder [Volume 52, Issue 10, 2021, Pages 2725-2740]
  • Salami Hosseini, Mahdi Droplet Deformation Between Two Moving Parallel Plates [Volume 51, Issue 6, 2020, Pages 1305-1324]
  • Salari, Masoomeh Finite Element Modeling of Fluid-Solid-Piezoelectric for Investigating the Ways of Improving the Performance of the Micro Energy Harvester in the Fluid Flow [Volume 54, Issue 1, 2022, Pages 31-54]
  • Salari, Mohammad Analysis of the semi-elliptical crack in the FGM spherical pressure vessels [Volume 55, Issue 6, 2023, Pages 705-722]
  • Salarirad, Hoseyn Determining Critical Wind Velocity During Fire Accident in Alborz Tunnel [Volume 44, Issue 1, 2012, Pages 47-55]
  • Salavati, Hadi Multi-Objective Optimization of Laser Peening Process Parameters Using Taguchi Orthogonal Array and Gray Relational Analysis [Volume 52, Issue 10, 2021, Pages 2917-2930]
  • Salehi, A. Investigation of the Ratcheting on Corroded Places with Different Shape and Depths in Elbow Pipe under Internal Pressure and Cyclic Bending Moment [Volume 51, Issue 1, 2019, Pages 19-32]
  • Salehi, Gholamreza Investigation of hydrogen production process by partial oxidation of natural gas in a large non-catalytic reformer and comparison with methane steam reforming process in a small catalytic reformer [Volume 53, Issue 5 (Special Issue), 2021, Pages 3275-3292]
  • Salehi, Milad Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still [Volume 54, Issue 9, 2022, Pages 2103-2120]
  • Salehi Kolahi, Mohammad Reza Investigation of Quality Factor for Linear Vibrations of Rectangular Micro-plates with Thermoelastic Damping [Volume 53, Issue 2, 2021, Pages 851-862]
  • Salehizadeh, Amir Masoud Development of A Fully Lagrangian Smoothed Particle Hydrodynamics -Based Coupled Method for Simulation of Fluid– Structure Interaction [Volume 52, Issue 11, 2021, Pages 3155-3170]
  • Saleh Mirhasani, Soheila Exergoeconomic Analysis of a Solid Oxide Fuel Cell Based Trigeneration System with External Reformer and Dimethyl Ether [Volume 52, Issue 6, 2020, Pages 1463-1478]
  • Salimi, Aref Hydrodynamic Behavior of Different No-Slip Condition on the Curved Boundaries in the Lattice Boltzmann Method [Volume 52, Issue 7, 2020, Pages 1925-1942]
  • Salimi, Mahmoud Simulation of Chatter in Cold Rolling Strip using Finite Element Method [Volume 42, Issue 1, 2011, Pages 89-97]
  • Salimi, Mohammadreza Numerical Simulation of Film Cooling around a Gas Turbine Blade via Partially Averaged Navier-Stokes Approach (PANS) [Volume 48, Issue 3, 2016, Pages 267-280]
  • Salimi, Mohammadreza Numerical Study of Catalyst Bed Performance of a Monopropellant Thruster Under Influence of Porosity Coefficient [Volume 54, Issue 7, 2022, Pages 1607-1622]
  • Salimi, M.R. Phenomenological Study of Droplet Behavior Passing through a Porous Medium at Pore-Scale, Using Lattice Boltzmann Method [Volume 50, Issue 4, 2018, Pages 697-710]
  • Salimi Nezhad, Iman Evaluating the effects of material extrusion 3D printing process parameters on shape-shifting of Poly-lactic acid 4D-printed structures [Volume 53, Issue 6 (Special Issue), 2021, Pages 4095-4110]
  • Salimpour, Mohammad Reza Numerical Analysis of Temperature Distribution in A 3-D MR Image-Based Human Finger Model under Severe Cold Conditions [Volume 51, Issue 4, 2019, Pages 171-180]
  • Salimpour, Mohammad Reza The Experimental Analyses of Grooved Surface and Magnetic Field Effects on γ-Fe2O3/water Nanofluid Pool Boiling [Volume 52, Issue 6, 2020, Pages 1577-1594]
  • Salmani Tehrani, M. Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section [Volume 49, Issue 4, 2018, Pages 773-784]
  • Salmanpour, Niloufar State-space approach for bending analysis of functionally graded piezoelectric plate using five-variable refined plate theory [Volume 55, Issue 2, 2023, Pages 213-234]
  • Salmanzadeh, Mazyar Evaluation of the Impact of Fan Coil Airflow Velocity on the Micron Particles Distribution in the Human Breathing Zone [Volume 52, Issue 6, 2020, Pages 1675-1686]
  • Samadi, Sajjad Optimal laser control for cancer thermal therapy [Volume 54, Issue 10, 2023, Pages 2333-2350]
  • Samarikhalaj, H. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
  • Sam Daliri, Omid Condition monitoring of defective single lap adhesive joint using carbon nanotubes [Volume 53, Issue 2 (Special Issue), 2021, Pages 1321-1330]
  • Sanaei, Hassan Numerical study and investigation of the effect of magnetic field on fluid hydrodynamic behavior [Volume 53, Issue 5, 2021, Pages 2857-2868]
  • Sanaye, Sepehr Comparison of axial and radial soil temperature distribution in U-tube and coaxial borehole heat exchangers [Volume 53, Issue 7, 2021, Pages 4361-4378]
  • Sangtarash, Mohammad Reza The Feasibility Study of a Night Sky Radiative Cooling System for Cooling the Intake Air of a Gas Turbine [Volume 53, Issue 1, 2021, Pages 155-172]
  • Sansebli, Mehdi Fabrication and characterization of a flexible nanogenerator using reverse electrowetting concept [Volume 53, Issue 5, 2021, Pages 3023-3034]
  • Sarabi, Mehrdad Investigation of the response of a multi-zone simulation code equipped with blow-by sub-model in a dual fuel spark-ignition engine [Volume 53, Issue 5, 2021, Pages 3035-3056]
  • Sarafraz, Y. Examination of Helicopter Dynamic Response Using Dynamic Inflow Model [Volume 50, Issue 1, 2018, Pages 189-196]
  • Sarfaraz Khabbaz, Roohollah The Effect of Stacking Sequence Parameters on the Vibration Behavior of Rotating Hybrid Composite Shaft [Volume 54, Issue 10, 2023, Pages 2277-2296]
  • Sarhaddi, F. Performance Optimization of an Irreversible Brayton Cycle, and Proposing New Definitions for Second Law Efficiency and Exergy [Volume 50, Issue 2, 2018, Pages 385-398]
  • Sarhaddi, F. Performance Assessment of a Humidification-Dehumidification Desalination Unit Connected to Photovoltaic Thermal Collectors [Volume 49, Issue 3, 2017, Pages 653-662]
  • Sarhaddi, F. Performance Investigation of a Single Effect (LiBr-H2O) Absorption Cooling System connected to Photovoltaic Thermal Collectors [Volume 50, Issue 6, 2019, Pages 1375-1388]
  • Sarhaddi, Faramarz Performance Analyzing of an Inverted Absorber Basin Solar Still Equipped with Photovoltaic Cells [Volume 52, Issue 2, 2020, Pages 297-310]
  • Sarhaddi, Faramarz Thermal Analysis of a Solar Wall Equipped to Nano Phase Change Material [Volume 51, Issue 4, 2019, Pages 131-140]
  • Sarhaddi, Faramarz Thermoeconomic Analysis of a Double Slope Basin Solar Still Equipped to Phase Change Material and Photovoltaic Thermal Collector [Volume 52, Issue 6, 2020, Pages 1531-1550]
  • Sarhaddi, Faramarz Performance Analysis of a Building Heating System using Underground Source Heat Pump and Photovoltaic Thermal Collector [Volume 52, Issue 9, 2020, Pages 2403-2424]
  • Sarhaddi, Faramarz Thermal Analysis of a Solar Wall Equipped with Photovoltaic Cells and Phase-Change Materials [Volume 53, Issue 1, 2021, Pages 173-190]
  • Sarhaddi, Faramarz Investigation of Quality Factor for Linear Vibrations of Rectangular Micro-plates with Thermoelastic Damping [Volume 53, Issue 2, 2021, Pages 851-862]
  • Sarhaddi, Faramarz Numerical study and investigation of the effect of magnetic field on fluid hydrodynamic behavior [Volume 53, Issue 5, 2021, Pages 2857-2868]
  • Sarhaddi, Faramarz Thermal performance evaluation of a greenhouse solar dryer equipped with photovoltaic cells and phase change material [Volume 53, Issue 5 (Special Issue), 2021, Pages 3367-3384]
  • Sarhaddi, Faramarz Multiobjective Optimization of a Tri-Generation Organic Rankine Cycle for Power, Freshwater and Heat: Suitable Mixture of Three Fluid [Volume 54, Issue 5, 2022, Pages 1125-1148]
  • Sattarifar, I. Numerical and Experimental Investigation of Layer Number Effect on Residual Stresses Cladding Process [Volume 49, Issue 4, 2018, Pages 839-850]
  • Sattarifar, I. Buckling Analysis on Cylindrical Shell with Longitudinal and Circumferential Welds [Volume 50, Issue 3, 2018, Pages 551-560]
  • Sattarifar, Iraj A Numerical and Experimental Study on Fatigue Crack Growth of Ti-6Al-4V Specimens in Presence of Tensile Residual Stresses [Volume 55, Issue 4, 2023, Pages 543-554]
  • Sattari-Far, I. Numerical Study of Overlay Welding Effects on Residual Stresses in Girth Welded Steel Pipes [Volume 50, Issue 3, 2018, Pages 479-488]
  • Sayadian, shahide Reducing NOx emissions in gas turbine combustor by steam injection using CLN technique [Volume 48, Issue 3, 2016, Pages 247-256]
  • Sayah Badkhor, Mostafa Study on Performance of Sandwich Panel Structures with Honeycomb Core Subjected to Impulsive Loading [Volume 52, Issue 10, 2021, Pages 2823-2838]
  • Sayah Badkhor, Mostafa Plastic Deformation of Reinforced Aluminum Plates with Polyurea Coating under Impulsive Loading [Volume 53, Issue 2 (Special Issue), 2021, Pages 1251-1268]
  • Sayah Badkhor, Mostafa Effect of intense impulsive loading on performance of multi-layered plates [Volume 53, Issue 4 (Special Issue), 2021, Pages 2639-2670]
  • Sayah Badkhor, Mostafa Investigation of penetration behavior of monolithic and multi-layered metallic targets subjected to a projectile impact [Volume 53, Issue 4, 2021, Pages 2309-2330]
  • Sayar, Hassan Study of Autofrettage Process Effect in Thick-walled Cylinder with Metal Matrix Composite by the method of Finite Element Cyclic Stress Analysis [Volume 54, Issue 8, 2022, Pages 1867-1894]
  • Sayebani, Mesbah Analysis of Highly Skewed Propeller and Power Peridiction for the Submarine by Boundary Element Method [Volume 42, Issue 2, 2011, Pages 47-56]
  • Sayehbani, M. Investigation of Step Sweep-Forward Angle Effects on the Hydrodynamic Performance of a Planing hull [Volume 50, Issue 4, 2018, Pages 903-912]
  • Sayehvand, Habib Numerical modeling of rock cutting with abrasive water jet in order to determine the optimal range of parameters affecting the depth and volume of cutting [Volume 55, Issue 8, 2023, Pages 971-994]
  • Sazgar, Amjad Optimization of Carbon Fiber Reinforced Composite Grinding Process by Response Surface Method [Volume 54, Issue 2, 2022, Pages 481-490]
  • Sazgar, Amjad Effect of Build Orientation and Size on the Amount of the Defects of Stainless Steel 316L Parts Made by Selective Laser Melting Process [Volume 55, Issue 10, 2024, Pages 1219-1232]
  • Schmauder, Siegfried Investigation of the micromechanical behavior of ferritic-martensitic steel under complex loading [Volume 53, Issue 6, 2021, Pages 3689-3702]
  • Sedaghatkish, َA. Two Dimensional Simulation of Film Boiling Heat Transfer in Complex Geometries Using Front Tracking Method [Volume 50, Issue 6, 2019, Pages 1319-1333]
  • Seddighi, Sadegh Simulation of Effective Parameters on Desalination Water Using Capacitive Deionization Method [Volume 53, Issue 11, 2022, Pages 5595-5612]
  • SEDDIGHI, MOJTABA Evaluation of experimental and theoretical bending behavior of shape memory actuator [Volume 48, Issue 4, 2017, Pages 355-362]
  • Sedghi, Omid Design of Fault Tolerant Controller in Flight Control System [Volume 54, Issue 10, 2023, Pages 2297-2314]
  • Sedighi, Kurosh Numerical Simulation of Dynamic Behavior of Falling Two Adjacent Droplets Using Lattice Boltzmann Method [Volume 48, Issue 3, 2016, Pages 291-304]
  • Sedighi, M. Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
  • Sedighi, mohammad Comparing force and cup thickness variations in deep drawing of thick sheets in flat, conical and tractrix dies [Volume 41, Issue 1, 2010, Pages 59-65]
  • Sedighi, mohammad reza A Three Dimensional Elasticity Solution of Single Layer Cylindrical Piezoelectric Panel under Dynamic Loading [Volume 41, Issue 1, 2010, Pages 9-17]
  • Sefid, Mohammad Numerical Solution of Viscoplastically Lubricated Multi-layer Core-Annular Flow Using the Spectral Element Method [Volume 52, Issue 11, 2021, Pages 3107-3124]
  • Sefid, Mohammad Numerical Study of Mixing in Double and Multiple T-Shaped Micromixers with Aligned and Non-Aligned Inputs [Volume 52, Issue 7, 2020, Pages 1715-1728]
  • Sefid, Mohammad Numerical Simulation of Mixing Two Fluids of Different Viscosities in a Microchannel with Curved Stirrer by Lattice Boltzmann Method [Volume 52, Issue 11, 2021, Pages 3187-3202]
  • Sefid, Mohammad Power Improvement of a Commercial Large Scale Vertical-Axis Wind Turbine Using Plasma Actuators [Volume 53, Issue 3, 2021, Pages 1487-1504]
  • Sefid, Mohammad Performance investigation of a novel trigeneration system using solar-biomass energy [Volume 55, Issue 9, 2023, Pages 1089-1112]
  • Sefidgar, M. Tracer Kinetic Modeling and Derivation of Time Activity Curves in Positron Emission Tomography in order to Enhance Accuracy in Cancerous Regions Diagnosis [Volume 50, Issue 4, 2018, Pages 813-822]
  • Seiedi Niaki, Keyvan Experimental Evaluation of an Energy Efficiency Improvement System in Split Air Conditioner [Volume 52, Issue 2, 2020, Pages 365-380]
  • Seifi, Abbas A Stochastic Programming Model for Power Generation Expansion Planning in Iran [Volume 41, Issue 1, 2010, Pages 87-98]
  • Selahi, Ehsan Transient Analysis and Free Vibration of Functionally Graded Truncated Conical Shells Subjected to Moving Pressure [Volume 53, Issue 2, 2021, Pages 897-912]
  • Sepahi-Younsi, Javad Computational Investigation of the Effects of Heat Source Position on the Performance of a Mixed Compression Supersonic Intake [Volume 52, Issue 4, 2020, Pages 1023-1036]
  • Sepahi-Younsi, Javad Experimental Study of Effects of Bleed Geometric Parameters on the Performance of a Supersonic Axisymmetric Intake [Volume 52, Issue 7, 2020, Pages 1809-1828]
  • Sepah Mansoor, Mehran Steam generation via solar energy and localizing the light on the pinewood surface [Volume 53, Issue 3 (Special Issue), 2021, Pages 2001-2012]
  • Sepehrianazar, Farid Investigation of the effect of free-wind velocity on the performance of small-scale vertical axis wind turbine [Volume 53, Issue 3 (Special Issue), 2021, Pages 1709-1728]
  • Sepehrirahnama, Shahrokh A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems [Volume 52, Issue 7, 2020, Pages 1905-1924]
  • Sepehrnia, M. Investigation of Nanofluid Flow Field and Conjugate Heat Transfer in a Microchannel Heat Sink with Four Different Arrangements [Volume 51, Issue 2, 2019, Pages 381-398]
  • Sepehrnia, M. Natural Convection of Turbulent Al2O3-Water Nanofluid with Variable Properties in a Cavity with a Heat Source and Heat Sink on Vertical Walls [Volume 50, Issue 6, 2019, Pages 1237-1250]
  • Sepehrnia, Mojtaba Three-Dimensional Simulation of Helium Gas Flow in an Aluminum Heat Sink with Rectangular Microchannel in Slip Flow Regime [Volume 52, Issue 2, 2020, Pages 477-492]
  • Sepehrnia, Mojtaba Thermal performance and entropy generation analyses of nanofluid flow in a trapezoidal heat sink with different arrangements [Volume 51, Issue 4, 2019, Pages 101-110]
  • Sepehrnia, Mojtaba Numerical Simulation of Magnetic Field Effect on Thermal and Thermo-Hydraulic Performance and Entropy Generation of a Silicon Microchannel Heat Sink Under Uniform Heat Flux [Volume 53, Issue 1 (Special Issue), 2021, Pages 517-538]
  • Sepehry, Naserodin Free and Forced Vibration Analysis of Piezoelectric Patches Based on Semi-Analytic Method of Scaled Boundary Finite Element Method [Volume 52, Issue 12, 2021, Pages 3463-3484]
  • Sepehry, Naserodin Control of droplet size in a two-phase microchannel using PID controller: A novel experimental study [Volume 53, Issue 7, 2021, Pages 4279-4292]
  • Sepehry, Naserodin Modeling of vibro-acoustic modulation induced by non-linear contact in the Euler-Bernoulli beam using the Fourier spectral element [Volume 53, Issue 6 (Special Issue), 2021, Pages 3809-3824]
  • Sepehry, Naserodin Uncertainty Quantification in the Assessment of the Characteristics of the Electromechanical Impedance Spectrum of a Rectangular Piezoelectric Patch [Volume 54, Issue 10, 2023, Pages 2351-2376]
  • Seraj Mehdizadeh, Naser Analytical and Experimental Investigation of Frequency of Oscillation Modes in Combustion Chambers of Gas Turbines [Volume 42, Issue 2, 2011, Pages 27-35]
  • Setoodeh, A. Bending and Free Vibration Analysis of Functionally Graded Nano-plate Using Trigonometric Higher-Order Plate Theory [Volume 50, Issue 5, 2019, Pages 1039-1050]
  • Setoodeh, Ali Reza Transient Analysis and Free Vibration of Functionally Graded Truncated Conical Shells Subjected to Moving Pressure [Volume 53, Issue 2, 2021, Pages 897-912]
  • Setoodeh, Ali Reza Free vibration analysis of functionally graded carbon nanotubes reinforced composite skew folded plates using the isogeometric approach [Volume 53, Issue 4, 2021, Pages 2239-2260]
  • Seyedi, Mirmasoud Accurate and faster than real-time simulation of indoor airflow by using fast fluid dynamics [Volume 53, Issue 3 (Special Issue), 2021, Pages 1839-1860]
  • Seyedian chobi, Mahsa Numerical and Experimental Study of residual stress distribution due to multipass welding of stainless steel plates Pas·h [Volume 44, Issue 2, 2013, Pages 21-28]
  • Seyedkashi, S.M. Hossein Experimental and Numerical Investigation on the Reinforcement Cover to Concrete Surface Using Eddy Current [Volume 52, Issue 10, 2021, Pages 2791-2808]
  • Seyed Mahmoudi, Seyed Mohammad Thermodynamic Analysis of Power Generation System Based on Solid Oxide Fuel Cell With External Reforming [Volume 53, Issue 1 (Special Issue), 2021, Pages 605-622]
  • Seyed Mahmoudi, Seyed Mohammad Advanced Exergy Investigation of Combined Cycle of Helium Reactor Gas Turbine with Organic Rankine Cycle [Volume 54, Issue 7, 2022, Pages 1553-1574]
  • Seyedmonir, P. Buckling Analysis on Cylindrical Shell with Longitudinal and Circumferential Welds [Volume 50, Issue 3, 2018, Pages 551-560]
  • Seyed Mousavi, Seyed Mojtaba Kinetostatic Performance Comparison of Spherical Parallel Mechanisms Extracted from Type Synthesis with Modeling Clearance in Passive Joints [Volume 52, Issue 5, 2020, Pages 1301-1318]
  • Seyedpour, Seyedmorteza Effect of Fuel Additives on Gasoline Volatility [Volume 46, Issue 1, 2014, Pages 57-65]
  • Seyfi, Alireza Experimental and Numerical Investigation of Second Mode of Failure in Unlike End Notch Flexure Samples [Volume 52, Issue 8, 2020, Pages 2093-2106]
  • Seyyed Fakhrabadi, Mir Masoud Investigation of wave propagation in architected uniform triangle mass center fractal nano-bio-filters based on microtubules [Volume 53, Issue 6 (Special Issue), 2021, Pages 3939-3952]
  • Seyyedi, S. E. Numerical and Experimental Investigation of Effective Parameters on Formability of Al-St Two Layer Sheet Metals [Volume 50, Issue 3, 2018, Pages 517-528]
  • Seyyedi, Seyyed Masoud Investigating the Orientation of the Heater and Cooler on the Performance of a Mini Natural Circulation Loop with Cu-Water Nanofluid [Volume 52, Issue 11, 2021, Pages 3203-3224]
  • Shabani Nejad, E. Buckling and Vibration Analyses of Double-bonded Micro Composite Plates Reinforced by CNTs and BNNTs Based on MSGT [Volume 51, Issue 1, 2019, Pages 79-96]
  • Shabanpour, Milad Numerical and Experimental Investigation of Electromagnetic Inward Tube Forming in Coupled method [Volume 48, Issue 2, 2016, Pages 215-226]
  • Shabgard, mohammad reza A Comparative Study on the Effect of Ultrasonic Vibration on Aluminum Surface Properties in Electrical Discharge Alloying [Volume 52, Issue 3, 2020, Pages 657-668]
  • Shafaghat, R. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
  • Shafei, Ali Mohammad Modeling and trajectory tracking control of non-holonomic mobile robot with revolute-prismatic joints [Volume 53, Issue 2 (Special Issue), 2021, Pages 1041-1064]
  • Shafiee, Mojtaba Using Polyethylene Glycol, as a Phase Change Material and Fins for the Cooling of Photovoltaic Cells of the Crystalline Type [Volume 52, Issue 6, 2020, Pages 1551-1560]
  • Shafiee, Mojtaba The Drag Coefficient Prediction of a Rising Bubble through a Non-Newtonian Fluid [Volume 52, Issue 4, 2020, Pages 863-880]
  • Shafiee, Mojtaba An Experimental Investigation on the Convective Heat Transfer Coefficient and Nusselt Number in Water/Carbon Nanofluid [Volume 53, Issue 1, 2021, Pages 209-220]
  • Shafiei, Ali Reza Development of A Fully Lagrangian Smoothed Particle Hydrodynamics -Based Coupled Method for Simulation of Fluid– Structure Interaction [Volume 52, Issue 11, 2021, Pages 3155-3170]
  • Shafiei, Mohammad Behshad Experimental Investigation of a solar system to produce fresh water from waste heat of photovoltaic module using Heat pipes [Volume 51, Issue 4, 2019, Pages 41-50]
  • Shafiei, Mohammad Behshad Numerical Simulation of Magnetic Field Effect on Thermal and Thermo-Hydraulic Performance and Entropy Generation of a Silicon Microchannel Heat Sink Under Uniform Heat Flux [Volume 53, Issue 1 (Special Issue), 2021, Pages 517-538]
  • Shafiei Alavijeh, Mohammad Obtaining the equations to predict values of springback and side-wall curl radius of U-bending of DP600 dual-phase steel plates [Volume 47, Issue 2, 2016, Pages 35-44]
  • Shafiei Alavijeh, Mohammad Investigation and Optimization Flat Lapping Process Using Non-Dominated Sorting Genetic Algorithm II [Volume 52, Issue 3, 2020, Pages 669-686]
  • Shafiei Ghazani, Ardalan Numerical Solution of Liquid-Vapor Flow in Variable Cross-Section Ducts by Using Flux Vector Splitting Method [Volume 48, Issue 1, 2016, Pages 1-8]
  • Shafiei Mayam, M.H. Turbulent Structures in the Wake of a Wind Turbine Using Large Eddy Simulation [Volume 51, Issue 2, 2019, Pages 261-280]
  • Shafie Mayam, M. H. Experimental Investigation of the Bubbly Drag Reduction in the Presence of Axial Flow in a the Couette-Taylor System [Volume 47, Issue 1, 2015, Pages 33-45]
  • Shafigh, Mahdi Proposing a Finite Duration Cancer Treatment Using Multi-Objective Optimization [Volume 52, Issue 5, 2020, Pages 1365-1376]
  • SHAFYEI, ALI Evaluation of dissimilar joint properties between UNS S32750 and API X65 [Volume 46, Issue 2, 2015, Pages 45-55]
  • Shahabodini, Abolfazl Deformation analysis of single-wall carbon nanotubes: a shell theory based on the interatomic potential [Volume 46, Issue 2, 2015, Pages 1-12]
  • Shahandeh, Ali An Efficient Approach to Discrete Multiple Different Facility Location Problem [Volume 41, Issue 2, 2010, Pages 83-92]
  • Shahani, Amir reza Effect of Rotating Speed of Probe on Micro-Hardness, Tensile Strength, Fatigue Behavior and Failure Mode of Friction Stir Spot Weld of Al 6061-T6 of Lap-shear Specimens [Volume 51, Issue 3, 2019, Pages 31-40]
  • Shahani, Amir reza Study of the Analytical Solutions and Modelling of Nonlinear Buckling in Bellows [Volume 53, Issue 2, 2021, Pages 729-744]
  • Shahbad, Ramin The Prediction of Femoral Fracture Location Using Extended Finite Element Method [Volume 53, Issue 8, 2021, Pages 4595-4608]
  • Shahbani Zahiri, A. Numerical Study of Brinkman Number Effects on Heated Viscoelastic Fluid Flow in Channel with Sudden Expansion [Volume 51, Issue 2, 2019, Pages 483-496]
  • Shahbazi, H. Design of a Nonlinear Controller on Quadrotor Drone Using Combined Method of Gradient Particle Swarm Optimization [Volume 50, Issue 5, 2019, Pages 989-998]
  • Shahbazi, H. Imitation Learning of Complex Behaviors to Humanoid Robots using Evolutionary Optimization of Neural Network of Unit Pattern Generator [Volume 50, Issue 5, 2019, Pages 1123-1136]
  • Shahbazi, Hamed A comparison study of deep neural controllers and classic controllers in self-driving car application [Volume 53, Issue 4 (Special Issue), 2021, Pages 2439-2458]
  • Shahbazi, Hamed Design, Manufacturing, and Test of a Wearable Device to Monitor Athlete's Body Movements [Volume 54, Issue 3, 2022, Pages 671-686]
  • Shahbazi, Hamed Designing and building a dialogue mechanism suitable for RoboPuppet using deep learning [Volume 55, Issue 8, 2023, Pages 919-942]
  • Shahbazi, Hamed Reinforcement learning-based controller design for a ‎proposed octorotor with tilt-arm angles ‎ [Volume 55, Issue 10, 2024, Pages 1175-1194]
  • Shahedi, s. Nonlinear Buckling Analysis of nonlocal Boron Nitride Timoshenko nano beam based on Modified couple stress theory using DQM [Volume 49, Issue 2, 2017, Pages 241-252]
  • Shahgholi, Majid Out-of-Plane Vibration Mitigation of Wind Turbine Blade Using Highly Efficient Nonlinear Energy Sink [Volume 53, Issue 12, 2022, Pages 5851-5866]
  • Shahgholian-Ghahfarokhi, Davoud Prediction of the Critical Buckling Load of Grid-Stiffened Composite Plates Using Vibration Correlation Technique [Volume 52, Issue 1, 2020, Pages 221-232]
  • Shahhoseini, S. New Design of Cross-flow Fluidized Bed Dryers [Volume 50, Issue 6, 2019, Pages 1351-1360]
  • Shahi Ashtiani, M.A. Generalized Predictive Filter for Discrete-Time Linear Systems [Volume 49, Issue 4, 2018, Pages 795-804]
  • Shahi-Ashtiani, M. A. An Axiomatic Design Approach to Reduce Repetition in Tail Conceptual Design Process [Volume 50, Issue 1, 2018, Pages 3-14]
  • Shahin Varnoosfaderani, H. Three Dimensional Numerical Simulation of a Drop and Drop-to-Wall Interaction under Uniform Electric Field [Volume 50, Issue 4, 2018, Pages 755-766]
  • Shahmardan, M. Numerical Study of Brinkman Number Effects on Heated Viscoelastic Fluid Flow in Channel with Sudden Expansion [Volume 51, Issue 2, 2019, Pages 483-496]
  • Shahmardan, MM Experimental Investigation and Visualization of Flow Boiling Heat Transfer in a Vertical Tube Containing Metal Porous Medium [Volume 52, Issue 6, 2020, Pages 1595-1612]
  • Shahmardan, MM Experimental Study of Surfactant Type Effects on the Foam Stability and Mobility With the Approach of Enhancing Oil Recovery [Volume 53, Issue 1 (Special Issue), 2021, Pages 339-356]
  • Shahmardan, M.M. Comparing Between Thermal Performance of Coiled Tube and Straight Tube Inserted in a Cylindrical Reservoir in the Transient Convection Heat Transfer; Experimental Study [Volume 49, Issue 3, 2017, Pages 557-566]
  • Shahmardan, Mohammad Mohsen Experimental Study of Impacting a Spherical Hydrophobic Particle on an Air-Water Interface [Volume 52, Issue 4, 2020, Pages 943-954]
  • Shahmardan, Mohammad Mohsen Modeling of the Magnetorheological Damper with Optimization Approach for Magnetic Fluid Molecular Properties [Volume 52, Issue 7, 2020, Pages 1975-1992]
  • Shahmardan, Mohammad Mohsen Analytical Solution of the Heat Transfer in Heterogeneous Composite Conical Shells with Temperature Dependent Conduction Coefficients [Volume 52, Issue 9, 2020, Pages 2581-2596]
  • Shahmardan, Mohammad Mohsen Measurement of subcooled flow boiling heat transfer coefficient in vertical annulus tube [Volume 53, Issue 7, 2021, Pages 4345-4360]
  • Shahmardan, Mohammad Mohsen Convection Heat transfer Fe3O4/Water in a Square microchannel Under Uniform Heat Flux and Magnetic Field [Volume 53, Issue 9, 2021, Pages 4925-4942]
  • Shahmardan, Mohammad Mohsen Robust Control of Integrated Reverse Osmosis Desalination System with Photovoltaic Power Supply [Volume 54, Issue 3, 2022, Pages 567-588]
  • Shahmardan, Mohammad Mohsen Multi-objective Genetic Algorithm Optimization of Natural Gas Pressure Drop Station Heaters Using the Entropy Generation Minimization Method [Volume 55, Issue 1, 2023, Pages 61-84]
  • Shahmiri, F. Examination of Helicopter Dynamic Response Using Dynamic Inflow Model [Volume 50, Issue 1, 2018, Pages 189-196]
  • Shahmohammadi, A. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
  • Shahmolla Ghamsari, Ahmad Reza Analysis of the Wear of Railway Turnouts in a Combined Method and Hardening Model [Volume 52, Issue 5, 2020, Pages 1213-1228]
  • Shahnazari, Mohammad Reza Analysis of Density Wave Oscillations in a Boiling Channel by a New Analytical Model [Volume 53, Issue 3, 2021, Pages 1505-1520]
  • Shahnazi, M.A. A Power-law Preconditioning Approach for Accelerating the Convergence Rate of Steady and Unsteady Incompressible Turbulent Flows [Volume 51, Issue 2, 2019, Pages 437-454]
  • Shahrabi Farahani, Alireza Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing [Volume 52, Issue 4, 2020, Pages 797-812]
  • Shahravi, Majid Analysis of the Wear of Railway Turnouts in a Combined Method and Hardening Model [Volume 52, Issue 5, 2020, Pages 1213-1228]
  • Shahravi, Majid Numerical Analysis of Rolling Contact Fatigue in Common Turnouts of Iran Railway Track [Volume 52, Issue 8, 2020, Pages 2029-2044]
  • Shahravi, Morteza Gust Load Alleviation of Flexible Aircraft [Volume 54, Issue 2, 2022, Pages 289-308]
  • Shahriary, Pouya On the Fretting Fatigue Behavior of the Cold Expanded Aluminum Alloy 2024-T3 Plates [Volume 52, Issue 5, 2020, Pages 1193-1212]
  • Shahriyari, Mohammad Javad Circumferential Casing Treatment in a Transonic Fan [Volume 53, Issue 7, 2021, Pages 4189-4202]
  • Shahriyari, Mohammad Javad A Theory for Predicting Stall Cell Transient Behavior [Volume 53, Issue 9, 2021, Pages 4773-4788]
  • Shahrjerdi, Ali Experimental Study of Thermal and Mechanical Properties of Wood Boards Processed with Hard Recycled Skin of Walnut and Pistachio [Volume 54, Issue 8, 2022, Pages 1933-1944]
  • Shahryari, Mehran Numerical Investigation of Hybrid Wick Structure Effect on Thermal Performance of a Thin Flat Heat Pipe [Volume 53, Issue 11, 2022, Pages 5485-5504]
  • Shahryari Zanganeh, O. Performance Investigation of a Single Effect (LiBr-H2O) Absorption Cooling System connected to Photovoltaic Thermal Collectors [Volume 50, Issue 6, 2019, Pages 1375-1388]
  • Shahsavani, Amir Reza Experimental and Numerical Investigation of Initial Notch Radius Effect on Charpy Fracture Energy in API X65 Steel [Volume 52, Issue 5, 2020, Pages 1139-1152]
  • Shahsavar, Amin Simulation and Test of PV/T Air Systems with Natural Air Flow Operation [Volume 43, Issue 1, 2012, Pages 31-40]
  • Shahsavari, Hamid Investigation of Viscoelastic-Viscoplastic-Viscodamage Behavior of Polymers under Cyclic Loadings and Parametric Study of Their Mechanical Behavior [Volume 51, Issue 5, 2019, Pages 967-980]
  • Shahverdi, H. Flutter Instability of Aircraft Swept Wings by Using Fully Intrinsic Equations [Volume 49, Issue 4, 2018, Pages 785-794]
  • Shajari, Ali R Investigation of agglomeration and dispersion of reinforcement on the viscoelastic properties of CNT reinforced polymeric composites [Volume 48, Issue 4, 2017, Pages 363-370]
  • Shakeri, A. Experimental Investigation of the Forced Convection Heat Transfer of Nanofluids in Curved Tubes [Volume 50, Issue 2, 2018, Pages 347-358]
  • Shakeri, Faezeh Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Shakeri, M. Numerical investigation of environmental parameters on dynamic stability of a reentry capsule [Volume 49, Issue 2, 2017, Pages 325-340]
  • Shakeri, M. Investigation of Parameters on the Efficiency of the Fuel cell Based on the Principles of Sealing [Volume 50, Issue 2, 2018, Pages 425-436]
  • Shakeri, M. Optimization of piezoelectric fibers in FG panel with PFRC layers using genetic algorithms [Volume 49, Issue 2, 2017, Pages 279-290]
  • Shakeri, M. Dynamic Analysis of Asynchronous Low-Velocity Impacts on Laminated Composite Plate [Volume 50, Issue 1, 2018, Pages 47-62]
  • Shakeri, Mahmoud A Three Dimensional Elasticity Solution of Single Layer Cylindrical Piezoelectric Panel under Dynamic Loading [Volume 41, Issue 1, 2010, Pages 9-17]
  • Shakery, M. Buckling Analysis on Cylindrical Shell with Longitudinal and Circumferential Welds [Volume 50, Issue 3, 2018, Pages 551-560]
  • Shakhesi, S. Free Vibration of, Functionally Graded Materials Cylindrical Shells on Elastic Foundation under Axial force, Lateral Pressure and Different Boundary Conditions [Volume 50, Issue 5, 2019, Pages 1097-1112]
  • Shakib, Mohammad Hosein Effect of Functionally Graded Core on Dynamic Response of Sandwich Panel subjected to Transverse Low-velocity Impact [Volume 43, Issue 2, 2012, Pages 19-26]
  • Shakib, S.E. Optimization of a Hybrid Multi-effect Desalination with Thermal Vapor Compression and Reverse Osmosis Desalination System Integrated to A Gas Turbine Cycle [Volume 50, Issue 6, 2019, Pages 1333-1350]
  • Shakoori, M. Energy Simulation and Parametric Analysis of Water Cooled Photovoltaic/Thermal System [Volume 50, Issue 6, 2019, Pages 1361-1374]
  • Shakouri, M. A Peridynamic Study on Crack Growth in Plates with Two Anti-symmetric Cracks under Various Tensile Velocities [Volume 51, Issue 1, 2019, Pages 43-52]
  • Shamanian, Morteza Evaluation of dissimilar joint properties between UNS S32750 and API X65 [Volume 46, Issue 2, 2015, Pages 45-55]
  • Shamanian, Morteza Evaluation of Microstructure and Mechanical Properties of Dissimilar Joining of Inconel 718 Superalloy to 316 Austenitic Stainless Steel [Volume 54, Issue 12, 2023, Pages 2917-2936]
  • Shams, Mehrzad Experimental investigation on the geometrical characterization of the cone-jet mode of electrospray of ethanol-water mixtures with different concentrations by high-speed imaging [Volume 55, Issue 5, 2023, Pages 617-642]
  • Shamshirsaz, Mahnaz Free and Forced Vibration Analysis of Piezoelectric Patches Based on Semi-Analytic Method of Scaled Boundary Finite Element Method [Volume 52, Issue 12, 2021, Pages 3463-3484]
  • Shamshirsaz, Mahnaz Modeling of vibro-acoustic modulation induced by non-linear contact in the Euler-Bernoulli beam using the Fourier spectral element [Volume 53, Issue 6 (Special Issue), 2021, Pages 3809-3824]
  • Shamshirsaz, Mahnaz Investigation on Mechanical Properties of Polyoxymethylene Reinforced by Carbon Nanotube Using Molecular Dynamics [Volume 53, Issue 8, 2021, Pages 4691-4700]
  • Shamshirsaz, Mahnaz Uncertainty Quantification in the Assessment of the Characteristics of the Electromechanical Impedance Spectrum of a Rectangular Piezoelectric Patch [Volume 54, Issue 10, 2023, Pages 2351-2376]
  • Shamsizadeh, Pedram Numerical Modeling of Li-Ion Battery Temperature Control System at Low Initial Temperature [Volume 54, Issue 9, 2022, Pages 2085-2102]
  • Shamsodini Lori, R. Transient Numerical Analysis of a Tandem Compressor Stage [Volume 51, Issue 2, 2019, Pages 399-412]
  • Shamsollahi, Hossein Control of a Quadrotor Equipped with Robotic Arm Based on Disturbance Estimation [Volume 54, Issue 4, 2022, Pages 747-768]
  • Shanehsaz, Sobhan Comparison of natural and synthetic carotid arteries in the normal and occluded cases considering the effect of blood on elastic wall of artery [Volume 53, Issue 5, 2021, Pages 2821-2838]
  • Sharafi, Ahmad Effect of Steady Spanwise Blowing on the Aerodynamic Coefficients of a Maneuverable Aircraft Wing Model [Volume 52, Issue 11, 2021, Pages 3001-3014]
  • Sharafkhani, Naser Dynamic Behavior of a Micro-Beam Subjected to Voltage and Fluid Flow as a Micro Vortex Generator [Volume 52, Issue 8, 2020, Pages 2231-2242]
  • Shareyat, Mohammad Nonlinear Transient Thermoelastic Analysis of a Thick FGM Cylinder with Temperature-Dependent Material Properties Using the Finite Element Method [Volume 42, Issue 1, 2011, Pages 9-18]
  • Sharghi, Peyman Thermodynamic Analysis Of Variation Of Opening Angles Of Continuous Variable Valve Timing System [Volume 42, Issue 2, 2011, Pages 1-8]
  • Shariati, Mahmoud Experimental and Numerical Study of Buckling of Steel Cylindrical Shells with Quasi Elliptical Cutout Subjected to Axial Compression load [Volume 42, Issue 1, 2011, Pages 1-8]
  • Shariati, Mahmoud An Experimental Study on Ratcheting Behavior of Polyacetal Tube Under Uniaxial Ioading and Internal Pressure [Volume 46, Issue 2, 2015, Pages 13-21]
  • Shariati, Mahmoud Theoretical Analysis of Equal Channel Angular Pressing Process by Upper Bound Method and Its Experimental Investigation in Condition of Circular Cross-Section Channel [Volume 53, Issue 8, 2021, Pages 4729-4744]
  • Shariati, S. Kh. Experimental and Numerical Study of a Submerged Submarine Moving Near the Free Surface [Volume 51, Issue 2, 2019, Pages 347-364]
  • Sharifi, M. An Analytical Investigation into Effects of Fracture Dispersion Coefficients and Thermal Conductivity on Geothermally Fractured Reservoirs [Volume 50, Issue 2, 2018, Pages 359-368]
  • Sharifi, P. Analysis of Static Pull-in Instability and Nonlinear Vibrations of an Functionally Graded Micro-Resonator Beam [Volume 51, Issue 1, 2019, Pages 119-132]
  • Sharifi Dolatabadi, Davoud Reinforcement learning-based controller design for a ‎proposed octorotor with tilt-arm angles ‎ [Volume 55, Issue 10, 2024, Pages 1175-1194]
  • Sharifzadeh, Behshad Experimental Study of Impact Angle of Microburst Effects on a Cubic Structure – Part A: Stationary Microburst Observation [Volume 54, Issue 5, 2022, Pages 961-984]
  • Shaterzadeh, Alireza Optimization of Influence Parameters on Thermal Buckling of Hybrid Composite Plates with Cutout Using Genetic Algorithm [Volume 52, Issue 8, 2020, Pages 2107-2122]
  • Shaterzadeh, Alireza On the deviation from cyclic symmetry in a spinning ring under moving electromagnetic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 3891-3910]
  • Sheidani, Armin Experimental Comparison of Breakup and Flow Characteristics of Rectangular and Elliptical Water Jets [Volume 51, Issue 6, 2020, Pages 1201-1216]
  • Sheikhan, S. Investigating the Shear Strength of Friction Stir Lap Welded 7075 Aluminum Alloy [Volume 49, Issue 4, 2018, Pages 863-874]
  • Sheikh Khoshkar, Saber On the deviation from cyclic symmetry in a spinning ring under moving electromagnetic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 3891-3910]
  • Sheikholeslam, Farid Design of Three-dimensional Robust Guidance Law Using Adaptive Dynamic Programming with Input Saturation Constraint [Volume 52, Issue 12, 2021, Pages 3411-3424]
  • Sheikhzadeh, G. Investigation of the Wear Behavior of Graphite Steel (GSH48) in Ultrasonic Peening Process [Volume 50, Issue 3, 2018, Pages 529-540]
  • Sheikhzadeh, G. A. Natural Convection of Turbulent Al2O3-Water Nanofluid with Variable Properties in a Cavity with a Heat Source and Heat Sink on Vertical Walls [Volume 50, Issue 6, 2019, Pages 1237-1250]
  • Sheikhzadeh, G.A. Numerical Study of the Effects of Speed and Place of Ceiling Fans on Thermal Comfort and Reducing Energy in Office Buildings [Volume 50, Issue 2, 2018, Pages 309-326]
  • Sheikhzadeh, Gh. A. Effects of Sedimentation of Nanoparticles on Flow, Heat and Mass Transfer of Al2O3-water Nanofluid in a Cavity [Volume 49, Issue 3, 2017, Pages 581-594]
  • Sheikhzadeh, Ghanbar Ali Experimental Study of Fluid Flow and Heat Transfer of Al2 O3 -Water Nanofluid in Helically Coiled Micro-Finned Tubes [Volume 52, Issue 2, 2020, Pages 509-524]
  • Sheikhzadeh, Ghanbar Ali Numerical Study of the Effect of the Hall phenomenon on Supersonic flow in Magneto Hydro Dynamic Generator [Volume 52, Issue 4, 2020, Pages 1037-1054]
  • Sheikhzadeh, Ghanbar Ali Hydrothermal performance of trapezoidal fin equipped with vortex generator and hole: Investigation of the effect of vortex generator and hole position [Volume 53, Issue 3 (Special Issue), 2021, Pages 1963-1980]
  • Sheikh Zadeh, Ghanbar Ali Numerical Study of Natural Convection of Al2O3-Water Nanofluid with Variable Properties in a Cavity [Volume 45, Issue 1, 2013, Pages 39-49]
  • Shekari, Y. Numerical Study of Mixed Convection Heat Transfer in a Cavity Filled with NonNewtonian Nanofluids Utilizing Two-phase Mixture Model [Volume 50, Issue 6, 2019, Pages 1199-1212]
  • Shenavar, Abolfazl Preparation of Polystyrene-Starch Composite by Melt Extrusion and Evaluation of its Mechanical, Thermal Biodegradation Properties [Volume 52, Issue 10, 2021, Pages 2741-2758]
  • Shervani Tabar, Mohammad Taghi Dynamic Behavior of a Micro-Beam Subjected to Voltage and Fluid Flow as a Micro Vortex Generator [Volume 52, Issue 8, 2020, Pages 2231-2242]
  • Shervani Tabar, Mohammad Taghi Experimental study on the enhancement of the thermal efficiency of a household gas water heater [Volume 53, Issue 3 (Special Issue), 2021, Pages 2013-2030]
  • Shervani Tabar, Mohammad Taghi Numerical Study on the Enhancement of the Thermal Efficiency of a Household Gas Water Heater and Verification with Experimental Results [Volume 54, Issue 5, 2022, Pages 1199-1220]
  • Shirani, Ebrahim Numerical Analysis of Temperature Distribution in A 3-D MR Image-Based Human Finger Model under Severe Cold Conditions [Volume 51, Issue 4, 2019, Pages 171-180]
  • Shiravand, Ali A new method for estimating the compressive strain of cellular structures using microstructure of foams based on Laguerre tessellations [Volume 53, Issue 6, 2021, Pages 3629-3644]
  • Shiravi, Amir hossein Using Polyethylene Glycol, as a Phase Change Material and Fins for the Cooling of Photovoltaic Cells of the Crystalline Type [Volume 52, Issue 6, 2020, Pages 1551-1560]
  • Shiravi, Amir Hossein An Experimental Investigation on the Convective Heat Transfer Coefficient and Nusselt Number in Water/Carbon Nanofluid [Volume 53, Issue 1, 2021, Pages 209-220]
  • Shishebori, Davod An Efficient Approach to Discrete Multiple Different Facility Location Problem [Volume 41, Issue 2, 2010, Pages 83-92]
  • Shishesaz, Mohammad The Effect of Fiber Shape and Spacing on Stress Distribution in a Composite Monolayer with an Internal Crack [Volume 42, Issue 3, 2011, Pages 21-28]
  • Shishe Saz, Mohammad Stress Analysis of Closed Multi Cell Sections under Torsion [Volume 42, Issue 1, 2011, Pages 29-37]
  • Shojaeefard, M. H. A Coupled Thermal Model for Refrigeration Cycle and Cabin of the First Produced Vehicle Based on the National Vehicle Platform [Volume 50, Issue 6, 2019, Pages 1159-1174]
  • Shojaeefard@iust.ac.ir, Mohammad Hasan Investigation to set the type of pre-chamber fuel system in heavy gas engine HIMSEN 35/40 [Volume 53, Issue 5, 2021, Pages 2935-2952]
  • Shojaei, Ahmadreza Experimental Investigation of Water Level Control System of Liquid-Gas Separator in the Fuel Cell [Volume 53, Issue 1 (Special Issue), 2021, Pages 589-604]
  • Shojaeifard, Mohammad Investigation of Viscoelastic-Viscoplastic-Viscodamage Behavior of Polymers under Cyclic Loadings and Parametric Study of Their Mechanical Behavior [Volume 51, Issue 5, 2019, Pages 967-980]
  • Shojaeifard, Mohammad Mechanical Behavior of Temperature-Sensitive Hydrogel Considering Functionally Graded Characteristics [Volume 52, Issue 12, 2021, Pages 3583-3594]
  • Shojaian, Afshin Numerical investigation of the influence of operating conditions on the performance of PEMFC powered Unmanned Aerial Vehicle (UAV): a statistical approach [Volume 55, Issue 3, 2023, Pages 407-430]
  • Shokrani, P. Imitating Sound Ankle Behavior with a Powered Below-Knee Prosthesis and Validation of its Mechanical Performance [Volume 50, Issue 5, 2019, Pages 1137-1144]
  • Shokri, Aziz Improving the Milling Machine Stiffness by Optimizing the Internal Stiffeners Layout and the Wall Thickness Distribution of Column [Volume 52, Issue 3, 2020, Pages 687-702]
  • Shokri, Babak Electrical and Thermodynamic Characteristics of Non-transfer Arc and Electric Direct Current Plasma Torch with Air Working Gas [Volume 54, Issue 5, 2022, Pages 1149-1166]
  • Shokri, Rojin Rectangular liquid jets injected transversely into subsonic crossflow [Volume 53, Issue 5 (Special Issue), 2021, Pages 3117-3134]
  • Shokrieh, Mahmood Application of Strain Gradient Elasticity in Analysis of Elastic Properties of Single Walled Carbon Nanotubes [Volume 47, Issue 2, 2016, Pages 53-62]
  • Shokrieh, Mahmood M Investigation of agglomeration and dispersion of reinforcement on the viscoelastic properties of CNT reinforced polymeric composites [Volume 48, Issue 4, 2017, Pages 363-370]
  • Shokrolahi-Zadeh, Babak A Semi-Analytical Method Based on the Mixed Formulation for the Elastic Analysis of a Crack in an Anisotropic Homogeneous Medium [Volume 51, Issue 5, 2019, Pages 1019-1130]
  • Shokrollahi, Hassan Thermal Stress Analysis of the Carbon Nanotube Reinforced Composite Cylindrical Shells [Volume 53, Issue 10, 2022, Pages 5269-5292]
  • Shokrollahi, Hassan Numerical and Experimental Investigation on Compressive Properties of Egg Box Cores in Biodegradable Sandwich Panels [Volume 54, Issue 4, 2022, Pages 843-858]
  • Shooshtari, A. Analytical investigation on free nonlinear vibration of thin rectangular magneto-electro elastic plate on an onlinear fundation [Volume 49, Issue 2, 2017, Pages 317-324]
  • Shooshtari, A. Linear and Nonlinear free vibration of a Functionally Graded Magneto-electro-elastic Rectangular Plate Based on the Third Order Shear Deformation Theory [Volume 49, Issue 4, 2018, Pages 743-758]
  • Shooshtari, A. Stability Analyses and Dynamic Response of Fluid Conveyed Thin-Walled Piezoelectric Cylinder Under Harmonic Excitation [Volume 50, Issue 1, 2018, Pages 151-162]
  • Shooshtari, A. On the Free Vibration Analysis of a CNT-Reinforced Plate Bonded to a Magnetoelectroelastic Layer [Volume 50, Issue 1, 2018, Pages 15-24]
  • Shoshtari, Alireza Modeling and Optimization of Vibration Absorber Beam Combined with Magneto-Electro-Elastic Energy Harvester [Volume 54, Issue 6, 2022, Pages 1223-1248]
  • Siadaty, M. Numerical Simulation of Gas – Solid Cyclone Separators Operating at High Temperatures [Volume 49, Issue 3, 2017, Pages 495-506]
  • Sijanivandi, Sooran Multi Objective Optimization of Feedwater Heating Repowering on a Steam Power Plant Using the Genetic Algorithm [Volume 45, Issue 1, 2013, Pages 93-108]
  • Silani, Mohammad A New Machine Learning Method for Ball Bearing Condition Monitoring Based on Vibration Analysis [Volume 54, Issue 2, 2022, Pages 465-480]
  • Simjoo, Mohammad Modeling of Drilling Cuttings Transport by Foam in Horizontal Well Condition Using Computational Fluid Dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 357-374]
  • Sina, Naser Investigation of vehicle energy demand considering the modified tire power loss [Volume 53, Issue 6, 2021, Pages 3615-3628]
  • Sina, Seyed Ali On the deviation from cyclic symmetry in a spinning ring under moving electromagnetic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 3891-3910]
  • Sina, Seyed Ali Nonlinear Torsional Vibrations of Axially Loaded Pretwisted Beam with Primary Resonance Excitations [Volume 54, Issue 6, 2022, Pages 1271-1302]
  • Siyadati, Mohammad Hosein An investigation of solid phase distribution in metal foam produced by casting [Volume 44, Issue 2, 2013, Pages 113-119]
  • Siyah Mansori, Mohsen Design, Implementation and Experiments on a Fish-Like Robot [Volume 43, Issue 2, 2012, Pages 47-55]
  • S. Mahmoudi, S. Mohammad Advanced exergy and thermoeconomic analysis of the supercritical carbon dioxide recompression cycle: A comparative study [Volume 53, Issue 5, 2021, Pages 2967-2982]
  • Sobhnamayan, Fatemeh Performance Analyzing of an Inverted Absorber Basin Solar Still Equipped with Photovoltaic Cells [Volume 52, Issue 2, 2020, Pages 297-310]
  • Sobhnamayan, Fatemeh Thermoeconomic Analysis of a Double Slope Basin Solar Still Equipped to Phase Change Material and Photovoltaic Thermal Collector [Volume 52, Issue 6, 2020, Pages 1531-1550]
  • Sobhnamayan, Fatemeh Performance Analysis of a Building Heating System using Underground Source Heat Pump and Photovoltaic Thermal Collector [Volume 52, Issue 9, 2020, Pages 2403-2424]
  • Sobhnamayan, Fatemeh Thermal Analysis of a Solar Wall Equipped with Photovoltaic Cells and Phase-Change Materials [Volume 53, Issue 1, 2021, Pages 173-190]
  • Sobhnamayan, Fatemeh Thermal performance evaluation of a greenhouse solar dryer equipped with photovoltaic cells and phase change material [Volume 53, Issue 5 (Special Issue), 2021, Pages 3367-3384]
  • Sohankar, Ahmad Experimental Study of the Downstream Flow of a Cylinder with Three Different Cross Sections by Hot Wire Anemometry [Volume 46, Issue 1, 2014, Pages 13-23]
  • Sohrabifard, Mahfooz An Experimental Approach for Determination of Locators Reaction Forces in Milling Fixtures [Volume 53, Issue 12, 2022, Pages 5615-5626]
  • Sojoodi, Mahdi Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Soleimani, Elahe Energy, Exergy and Thermoeconomic Analysis of the Novel Combined Cycle of Solid Oxide Fuel Cell and Biogas Steam Reforming for Cogeneration Power and Hydrogen [Volume 54, Issue 1, 2022, Pages 211-234]
  • Soleimani, Iman Buckling investigation of cylindrical shell using size-dependent new super element [Volume 51, Issue 3, 2019, Pages 41-50]
  • Soleimani, J. An Analytical Model and Numerical Simulations to Predict Process Parameters in the Tube Bending Under Internal Fluid Pressure [Volume 50, Issue 3, 2018, Pages 447-466]
  • Soleimani Roody, B. Nonlinear Longitudinal Free Vibration of a Rod Undergoing Finite Strain [Volume 50, Issue 5, 2019, Pages 1085-1096]
  • Soleymani, M. Design and Implementation of Fast Terminal Sliding Mode Control for Vehicle Lane Keeping by Using Virtual Prototyping Simulations [Volume 49, Issue 2, 2017, Pages 371-378]
  • Soltani, Abbas Combination of active braking and semi-active suspension systems to improve the roll and yaw vehicle stability [Volume 53, Issue 6, 2021, Pages 3549-3570]
  • Soltani, Abbas Clutch Position Control for an Automated Manual Transmission Using Electromechanical Actuators [Volume 54, Issue 4, 2022, Pages 769-790]
  • Soltani, ali Effect of friction stir welding parameters on mechanical properties of aluminum alloy to austenitic stainless steel lap joint [Volume 46, Issue 2, 2015, Pages 35-43]
  • Soltani, Ali Point to Point Control of a Liquid Carrying Quadrotor [Volume 54, Issue 4, 2022, Pages 727-746]
  • Soltani, Ali Hybrid Position and Force Control for a Spherical Inverted Pendulum Connected to a Quadrotor in a Constrained Motion [Volume 54, Issue 10, 2023, Pages 2255-2276]
  • Soltani, Azadeh Lateral Stability Analysis of Thin-Walled Fiber-Metal Laminate Beam with Varying Cross-Section by Considering Nonlinear Strains [Volume 53, Issue 10, 2022, Pages 5239-5268]
  • Soltani, Elham Pollutants Transfer Simulation Model Using Combination of Augmented Reality and Computational Fluid Dynamics Techniques on Cell Phone Platform [Volume 55, Issue 1, 2023, Pages 143-156]
  • Soltani, M. Tracer Kinetic Modeling and Derivation of Time Activity Curves in Positron Emission Tomography in order to Enhance Accuracy in Cancerous Regions Diagnosis [Volume 50, Issue 4, 2018, Pages 813-822]
  • Soltani, Majid Image-based numerical model for drug delivery to solid tumors [Volume 53, Issue 5 (Special Issue), 2021, Pages 3187-3200]
  • Soltani, Majid Computational Modeling of Intraperitoneal Drug Delivery for the Treatment of Peritoneal Carcinomatosis [Volume 54, Issue 3, 2022, Pages 687-702]
  • Soltani, Majid Simulation of the Role of the Anti-Angiogenic Therapy in Fluid Flow Behavior and Macromolecule Transport into a Heterogeneous Solid Tumor [Volume 54, Issue 7, 2022, Pages 1481-1512]
  • Soltani, Majid Numerical Study of Therapeutic Effectiveness of Bolus Injection and Continuous Infusion on Drug Delivery to Vascularized Solid Tumor [Volume 54, Issue 11, 2023, Pages 2543-2560]
  • Soltani, Masoumeh Free vibration and flexural-torsional stability analyses of axially functionally graded tapered thin-walled beam resting on elastic foundation [Volume 53, Issue 6, 2021, Pages 3587-3614]
  • Soltani, Masoumeh Lateral Stability Analysis of Thin-Walled Fiber-Metal Laminate Beam with Varying Cross-Section by Considering Nonlinear Strains [Volume 53, Issue 10, 2022, Pages 5239-5268]
  • Soltani, Masoumeh Buckling analysis of tapered laminated composite channel-section beam-columns subjected to combined axial load and end moment [Volume 55, Issue 4, 2023, Pages 515-542]
  • Soltani, M.R. Impact of Reduced Frequency on Pressure Distribution on the Lower Surface of a Supercritical Airfoil in Pitch-Pause-Return-Motion [Volume 52, Issue 4, 2020, Pages 971-984]
  • Soltani, Nasser Numerical and Experimental Analysis of Damage Evolution and Martensitic Transformation in AISI 304 Austenitic Stainless Steel at Cryogenic Temperature [Volume 52, Issue 1, 2020, Pages 265-278]
  • Soltanian, Hossein Experimental Investigation of Combustion Species Radiation to Evaluate Equivalence Ratio in a Surface Flame Burner [Volume 53, Issue 1, 2021, Pages 41-52]
  • Soorgee, Mohammad Hossein Three-dimensional micromechanical modelling of effective elastic properties of graphene nanoplatelet-reinforced polymer nanocomposite using a HFGMC-based homogenization approach [Volume 55, Issue 4, 2023, Pages 495-514]
  • Soroushan, Mohsen 3D-Simulation and Numerical Analysis of the Local Entropy Generation and Exergy Destruction in a Stator Vane of a Typical Gas Turbine [Volume 52, Issue 11, 2021, Pages 3125-3142]

T

  • Tabatabaeipour, Morteza Ultrasonic Guided Wave-Based Inspection of Straight Seam Welded Pipes [Volume 52, Issue 10, 2021, Pages 2647-2660]
  • Tadi Bani, Yaghoob Buckling investigation of cylindrical shell using size-dependent new super element [Volume 51, Issue 3, 2019, Pages 41-50]
  • Tadi Bani, Yaghoob Control of a Piezoelectric Nano-Actuator based on Flexoelectric Size-Dependent Theory [Volume 52, Issue 1, 2020, Pages 109-126]
  • Tadi Bani, Yaghoob Investigation of Power-Law Fluid Flow through a Two-Dimensional Microchannel Based on a Couple Stress Theory-Calculation of Characteristic Length [Volume 52, Issue 7, 2020, Pages 1707-1714]
  • Tadjfar, Mehran Experimental Comparison of Breakup and Flow Characteristics of Rectangular and Elliptical Water Jets [Volume 51, Issue 6, 2020, Pages 1201-1216]
  • Tadjfar, Mehran Experimental Comparison of Injection Characteristics of Elliptical and Circular Liquid Jets into an Air Crossflow [Volume 52, Issue 7, 2020, Pages 1773-1792]
  • Tadjfar, Mehran Study on the Base Flow of Two-Dimensional Liquid Jets Injected Into Quiescent Air [Volume 52, Issue 11, 2021, Pages 3045-3056]
  • Tadjfar, Mehran Rectangular liquid jets injected transversely into subsonic crossflow [Volume 53, Issue 5 (Special Issue), 2021, Pages 3117-3134]
  • Tadjfar, Mehran Implementation of Continuous Blowing and Synthetic Jet Actuators to Control the Flow Separation over a Fully Stalled Airfoil [Volume 53, Issue 9, 2021, Pages 4847-4864]
  • Tadjfar, Mehran Experimental Investigation of a High Aspect Ratio Rectangular Liquid Jet in Parallel Airflow [Volume 53, Issue 11, 2022, Pages 5429-5444]
  • Taeibi Rahni, M. Phenomenological Study of Droplet Behavior Passing through a Porous Medium at Pore-Scale, Using Lattice Boltzmann Method [Volume 50, Issue 4, 2018, Pages 697-710]
  • Taeibi-Rahni, Mohammad Numerical Simulation of Film Cooling around a Gas Turbine Blade via Partially Averaged Navier-Stokes Approach (PANS) [Volume 48, Issue 3, 2016, Pages 267-280]
  • Tafazoli, Afshin Numerical and Experimental Study Of Energy Absorption of Multi-Layer Aluminum-Composite Conical Frustum Structures under Axial Loading [Volume 54, Issue 8, 2022, Pages 1851-1866]
  • Taghavi, R. Experimental Investigation of Flow Around a 3D Square Cylinder Using Five-hole Probe and Neural Networks Method [Volume 49, Issue 1, 2017, Pages 3-10]
  • Taghavi, Seyed Mohammad Numerical Investigation on the Fluid Elasticity Effect in the Impact of Oblique Drop onto Liquid Film [Volume 54, Issue 1, 2022, Pages 3-30]
  • Taghavipour, Amir Analyzing driving behavior based on vehicle information logging using MPU6050 [Volume 53, Issue 6 (Special Issue), 2021, Pages 3855-3874]
  • Taghavipour, Amir Introducing a novel strategy to manage lithium-ion cells in fast-charge discharge operations with Model predictive controller [Volume 55, Issue 6, 2023, Pages 677-704]
  • Taghavi Zenouz, R. Computational Analysis of Unsteady Tip Leakage Flow in an Isolated Axial Compressor Rotor Blade Row [Volume 49, Issue 3, 2017, Pages 485-494]
  • Taghavi Zenouz, Reza Experimental and Numerical Investigation of Film Cooling Effectiveness on Squealer Tip of a Turbine Blade [Volume 53, Issue 3, 2021, Pages 1521-1536]
  • Taghilou, Taghilou Hydrodynamic Behavior of Different No-Slip Condition on the Curved Boundaries in the Lattice Boltzmann Method [Volume 52, Issue 7, 2020, Pages 1925-1942]
  • Taghilou, Taghilou Stability and Thermodynamic Consistency in the Coexistence Curve Of Liquid-Vapor in A Modified Pseudo-Potential Model [Volume 52, Issue 11, 2021, Pages 3091-3106]
  • Taghilou, Taghilou Investigation of 2D Melting Process within a Porous Medium Considering Local Thermal Nonequilibrium Condition in the Presence of Sinusoidal Boundary Condition by Lattice Boltzmann Method [Volume 54, Issue 5, 2022, Pages 1181-1198]
  • Taghilu, M. J. Measurement of Strain by Digital Shearography with a New Algorithm of Phase Calculation [Volume 50, Issue 1, 2018, Pages 25-32]
  • Taghipoor Rezvan, Alireza A Stochastic Programming Model for Power Generation Expansion Planning in Iran [Volume 41, Issue 1, 2010, Pages 87-98]
  • Taghizadeh, Hadi Investigation of thermal cycle effect prior to cyclic loading on fatigue life of interference fitted specimens and fatigue life prediction [Volume 51, Issue 3, 2019, Pages 1-10]
  • Taghizadeh, Mohsen Investigating the Influence of Higher-Order Boundary Conditions on Free Vibrations of Bi-Directional Functionally Graded Thick Conical Micro-Shells [Volume 53, Issue 10, 2022, Pages 5085-5104]
  • Taghizadeh, Mostafa Optimal Control Based on Minimum-Energy Trajectory Planning of a Quadrotor [Volume 52, Issue 5, 2020, Pages 1349-1364]
  • Taghizadeh, Mostafa Optimal Adaptive Super-Twisting Sliding Mode Control of an Lower Limb Exoskeleton [Volume 52, Issue 12, 2021, Pages 3533-3548]
  • Taghizadeh, Mostafa Kinematic and dynamic performance evaluation of a four degrees of freedom parallel robot [Volume 53, Issue 4, 2021, Pages 2055-2072]
  • Taghizadeh, Mostafa Assessing short-term storage effects on hydrostatic wind turbine in presence of turbulent wind [Volume 53, Issue 6, 2021, Pages 3431-3444]
  • Taghizadeh, Mostafa Active Fault Tolerant Control of Wind Turbine Systems using Disturbance Observer-based Sliding Mode and Time Delay Estimation [Volume 53, Issue 8, 2021, Pages 4517-4534]
  • Taghizadeh, Mostafa Active fault tolerant control based on adaptive back-stepping nonsingular fast integral terminal sliding mode approach [Volume 53, Issue 6 (Special Issue), 2021, Pages 3763-3782]
  • Taghizadeh, Mostafa Robust and Adaptive Control of an Exoskeleton Robot For Tracking Modified Desired Trajectory Based on Zero Moment Point Stability Theory [Volume 53, Issue 12, 2022, Pages 5831-5850]
  • Taghizadeh, Yasin Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless Steel Materials [Volume 52, Issue 4, 2020, Pages 1055-1076]
  • Taghvaeipour, Afshin Application of a Superelement in Static and Vibration Analysis of Piezoelectric Hollow Cylinders [Volume 52, Issue 5, 2020, Pages 1245-1256]
  • Tahani, Masoud Analysis of Functionally Graded Cylindrical Vessels under Mechanical and Thermal Loads [Volume 41, Issue 1, 2010, Pages 49-58]
  • Tahani, Masoud Transient Analysis and Free Vibration of Functionally Graded Truncated Conical Shells Subjected to Moving Pressure [Volume 53, Issue 2, 2021, Pages 897-912]
  • Taheri, Alireza Impacts of Social Robots in Education and Rehabilitation of Children with Autism in Iran [Volume 52, Issue 8, 2020, Pages 2329-2354]
  • Taheri, Moein Experimental Extraction of Young's Modulus of MCF-7 Breast Cancer Cell Using Spherical Contact Models [Volume 53, Issue 12, 2022, Pages 5769-5784]
  • Taheri, Moein Investigation of the Effect of Different Friction Models On Experimental Extraction of 3D Nanomanipulation Force and Critical Time of Colon Cancer Tissue [Volume 54, Issue 4, 2022, Pages 791-804]
  • Taheri, Moein Experimental Study of the Effect of Distilled Water-Conducting Threads on the Performance of Stepped Solar Still [Volume 54, Issue 9, 2022, Pages 2103-2120]
  • Taheri, Moein Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Taheri, Morteza Tire Hardness Modeling Based on Longitudinal Ultrasonic Velocity Using the Gaussian Process Regression [Volume 51, Issue 5, 2019, Pages 1005-1016]
  • Taheri, Morteza Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
  • Taheri, Morteza Evaluation of the Impact of Fan Coil Airflow Velocity on the Micron Particles Distribution in the Human Breathing Zone [Volume 52, Issue 6, 2020, Pages 1675-1686]
  • Taheri, Seyedmahdi Investigation of the mechanical properties of multilayer graphene helicoids with different geometric characteristics using molecular dynamics simulation [Volume 53, Issue 2 (Special Issue), 2021, Pages 1237-1250]
  • Taheri Ahangar, Ali Experimental Study and Finite Element Simulation for Determining the Forming Window of 6063-O Aluminum Tube in Warm Hydroforming Process [Volume 52, Issue 3, 2020, Pages 571-586]
  • Taheri Nasab, Mohsen Numerical Analysis of Hydrodynamic Performance and Flow around Contra-Rotating Propellers [Volume 44, Issue 1, 2012, Pages 67-77]
  • Taherkhani, Zahra Sensitivity Analysis of Rotor Dynamic Behavior to Manufacturing Tolerances Based on Global Sensitivity Analysis and Statistical Methods [Volume 53, Issue 8, 2021, Pages 4501-4516]
  • Taherzadeh-Fard, Alireza Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Tahmasbi, AmirReza Investigation of the Effect of Parameters Related to the Absorbent Fabric on the Performance of The Stepped Solar Still Using the Taguchi Method [Volume 55, Issue 1, 2023, Pages 21-44]
  • Tahmasbi, Vahid Process modeling of force behavior in the automatic bovine cortical bone milling process using adaptive neuro-fuzzy inference system [Volume 53, Issue 2 (Special Issue), 2021, Pages 1287-1306]
  • Tahmasbi, Vahid Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
  • Tahmasbi, Vahid Numerical Investigation of Elastoplastic and Damage Behavior of Cortical Bone by Applying a New Damage Model [Volume 54, Issue 6, 2022, Pages 1423-1442]
  • Tahmasebpour, Maryam Modeling the calcium looping process with an emphasis on the bed hydrodynamics and sorbent characteristics [Volume 53, Issue 5, 2021, Pages 2807-2820]
  • Tahmasebpour, Maryam Removal of Lead Heavy Metal from Wastewater by Crystallization Process and Investigation of the Effective Parameters [Volume 53, Issue 11, 2022, Pages 5349-5366]
  • Tahmasebpour, Maryam Kinetic modeling of CO2 capture in calcium looping process in the presence of sulfur dioxide based on random pore and fractal-like models [Volume 55, Issue 5, 2023, Pages 659-674]
  • Tajaddod, Hamid Numerical study of the spread of toxic and hot fire gases in a multi-storey residential complex with and without sprinkler fire extinguishing system [Volume 55, Issue 11, 2024, Pages 1-1]
  • Tajbakhsh, Navid Chakherlou On the Fretting Fatigue Behavior of the Cold Expanded Aluminum Alloy 2024-T3 Plates [Volume 52, Issue 5, 2020, Pages 1193-1212]
  • Tajdani, Amin Study of The Effect of Wall Temperature and Oxidant Structure on Temperature Distribution and NO Emission in Non-Premixed Combustion Furnace [Volume 54, Issue 1, 2022, Pages 249-266]
  • Tajdari, Mehdi Using Artificial Neural Networks for Estimationof Springback in Cold Roll Forming [Volume 42, Issue 3, 2011, Pages 29-37]
  • Tajik, Behnaz Experimental Investigation of Heat Transfer Enhancement by Acoustic Streaming in a Closed Cylindrical Enclosure [Volume 44, Issue 1, 2012, Pages 11-20]
  • Tajik, Hamid Reza Numerical Investigation of Hybrid Wick Structure Effect on Thermal Performance of a Thin Flat Heat Pipe [Volume 53, Issue 11, 2022, Pages 5485-5504]
  • Tajyar, A. Influence of Interface Morphology on the Bond Strength During the Reshaping Process of Al-Cu Bimetal Pipes [Volume 50, Issue 3, 2018, Pages 467-478]
  • Talaee, Mohammad Reza Investigation of effective parameters on critical ventilation velocity in underground tunnels [Volume 48, Issue 1, 2016, Pages 41-54]
  • Talebi, Shahram The Experimental Analyses of Grooved Surface and Magnetic Field Effects on γ-Fe2O3/water Nanofluid Pool Boiling [Volume 52, Issue 6, 2020, Pages 1577-1594]
  • Talebi, Shahram Experimental and Numerical Simulation of Fluid Flow and Inclusion Removal in the Steel Continuous Casting Tundish [Volume 52, Issue 7, 2020, Pages 1943-1954]
  • Talebi, Shahram Pool Boiling Simulation on Vertical Plate with Triangular & Circular grooves [Volume 54, Issue 11, 2023, Pages 2645-2662]
  • Talebi, S. S. Investigation of Compressor Blade Roughness Increment Effect on Micro Turbine Performance [Volume 49, Issue 3, 2017, Pages 471-484]
  • Talebian, Taha Analysis of Functionally Graded Cylindrical Vessels under Mechanical and Thermal Loads [Volume 41, Issue 1, 2010, Pages 49-58]
  • Talebi-Ghadikolaee, Hossein Experimental and numerical investigation of the plastic deformation of metallic bipolar plates with serpentine flow filed [Volume 53, Issue 6, 2021, Pages 3717-3732]
  • Talebi Tooti, Mostafa Free vibration analysis of nanotube-reinforced composite conical shell in high temperature environment [Volume 51, Issue 3, 2019, Pages 101-110]
  • Talebizadeh, M. A. Design, Manufacturing and Performance Evaluation of a Fixed Focus Scheffler Concentrator in Kerman [Volume 50, Issue 6, 2019, Pages 1303-1318]
  • Talebsafa, Valeh Predicting Sheets Forming Limit Diagrams by Numerical Simulation of Nakazima and Modified Marciniak Tests [Volume 52, Issue 3, 2020, Pages 527-542]
  • Tale Masouleh, Mahdi Solving the Forward Kinematic Problem of Under-Constrained Cable Driven Robots for Online Control Purposes [Volume 52, Issue 1, 2020, Pages 43-56]
  • Tale Masouleh, Mahdi Kinetostatic Performance Comparison of Spherical Parallel Mechanisms Extracted from Type Synthesis with Modeling Clearance in Passive Joints [Volume 52, Issue 5, 2020, Pages 1301-1318]
  • Talesh Bahramia, Hamid Reza An Empirical Study on Dropwise Condensation Occurred on Surfaces Hydrophobized Using a Single-Step Electrodeposition [Volume 52, Issue 6, 2020, Pages 1397-1412]
  • Talezadehlari, Ali Investigating the effect of thermal cycles on the recovery of tensile strength in self-healing composites under impact loading [Volume 55, Issue 2, 2023, Pages 159-178]
  • Tamadon, A. Vibrations Analysis of a Rotor Supported by Tilting-Pad Journal Bearings with Considering of Geometric Nonlinearity [Volume 52, Issue 1, 2020, Pages 141-154]
  • Tamim, Hossein Numerical Simulation of Low-Density Lipoprotein Concentration Boundary Layer in a Straight Artery and the Effects of Wall Shear Stress [Volume 52, Issue 11, 2021, Pages 3143-3154]
  • Taraghi Osguei, Amin Two-three degree of freedom model for Anti Stick-Slip Tool of drill-string [Volume 55, Issue 6, 2023, Pages 737-758]
  • Taran, Babak A Practical Method for Controlling the Parallel Robot Path Based on the Sliding Mode Method with Fuzzy Adjustable Coefficients [Volume 55, Issue 2, 2023, Pages 257-282]
  • Taraz Jamshidi, Youssef Metallic Closed-Cell Foam Filled Tube Uniaxial Crushing Behavior Analysis Using Voronoi Approach [Volume 52, Issue 8, 2020, Pages 2135-2148]
  • Tarmigh, M. Numerical Simulation of Transient Compressible Flow in Natural Gas long Transmission Pipelines Using a Suitable Parallel Algorithm [Volume 50, Issue 4, 2018, Pages 785-798]
  • Tavakkol, Fardad Numerical analysis of flow and natural convection heat transfer in a circular enclosure heated from bottom utilizing porous layer [Volume 53, Issue 3 (Special Issue), 2021, Pages 1937-1962]
  • Tavakkoli-Moghaddam, Reza Modeling and Solving of a Bi-Criteria Scheduling Problem for a Cellular Manufacturing System with Sequence-Dependent Cell Setup Times [Volume 42, Issue 3, 2011, Pages 61-72]
  • Tavakol, M. Effect of Support on Wind Flow Field Around Array of Two Inline Buildings [Volume 51, Issue 2, 2019, Pages 249-260]
  • Tavakol, Mohammad Mehdi Numerical Investigation of Flow Field around a Mannequin Model with Airway System in an Air Conditioned Room [Volume 52, Issue 4, 2020, Pages 955-970]
  • Tavakoli, Omid Experimental Study on Stability of Magnetorheological Fluid by Using of Fe3O4/ Cellulose Nanoparticles [Volume 52, Issue 10, 2021, Pages 2779-2790]
  • Tavakoli dastjerd, Fateme Steam generation via solar energy and localizing the light on the pinewood surface [Volume 53, Issue 3 (Special Issue), 2021, Pages 2001-2012]
  • Tavakoli K., M. Design and Construction of an Electronic Tiltmeter Calibrator and Estimation of Calibration Uncertainty [Volume 50, Issue 5, 2019, Pages 1113-1122]
  • Tavana, Mahdi Experimental Study of Hydrodynamic Behavior and Breakup of Liquid Jet with/ without the Electric Field [Volume 51, Issue 6, 2020, Pages 1487-1498]
  • Tavari, AmirHossein Three-dimensional surface capture from the back anatomy to quantify three-dimensional vertebral column curvatures without using anatomical markers [Volume 53, Issue 4 (Special Issue), 2021, Pages 2629-2638]
  • Tavari, Hojatollah Simulation and optimization of surface roughness and cutting force in dynamic ploughing process of single crystal copper using molecular dynamics method [Volume 55, Issue 12, 2024, Pages 3-3]
  • Tavari, Tannaz Investigation of Electro-Osmotic Micro-Pumps Using Electrical Field Gradient and Asymmetric Micro-Electrodes: Numerical Modeling and Experimental Validation [Volume 54, Issue 1, 2022, Pages 101-122]
  • Tayebi, A. Numerical Study of Mixed Convection Heat Transfer in a Cavity Filled with NonNewtonian Nanofluids Utilizing Two-phase Mixture Model [Volume 50, Issue 6, 2019, Pages 1199-1212]
  • Tayebzadeh, Fatemeh Melting Process of Phase Change Materials in a Triplex-Tube: Arrangement, Newtonian and Non-Newtonian [Volume 54, Issue 5, 2022, Pages 1167-1180]
  • Taylor, Robert Investigation of using hybrid nanofluid-phase change material spectral splitter in photovoltaic/thermal system [Volume 53, Issue 7, 2021, Pages 4429-4454]
  • Tayyareh, Ahmadreza Experimental Analysis of a Gas-Tank Water Heater with Porous Burner [Volume 52, Issue 6, 2020, Pages 1613-1626]
  • Tebyan Jahromi, Masoud Simulation of Steady Incompressible Flow around a NACA0015 Airfoil Using Actuator Surface Method and Mass Corrected Interpolation Technique [Volume 54, Issue 5, 2022, Pages 1047-1080]
  • Teymoori, Saeed Experimental Investigation of the Effects of Inlet Cooling Air Temperature on the Occupants’ Local Thermal Sensation in the Under-Floor Air Distribution System [Volume 53, Issue 3, 2021, Pages 1537-1548]
  • Teymouri, Saba Numerical Study of Lock Exchange Turbidity Current Depositional Behavior in Stratified Environment [Volume 51, Issue 6, 2020, Pages 1235-1252]
  • Teymouri, Saba Numerical Simulation of Three-Dimensional and Bi-Disperse Particle-Laden Turbidity Current in an Experimental Channel in the Presence of an Obstacle [Volume 52, Issue 7, 2020, Pages 1955-1974]
  • Teymourtash, Ali Reza An Investigation of Condensing Steam Flow in a Turbine Cascade with Injection of Water Droplets at Inlet [Volume 43, Issue 1, 2012, Pages 71-84]
  • Teymourtash, Ali Reza Experimental Study of the Effect of Fluid Jet Swirl on Circular Hydraulic Jump [Volume 53, Issue 7, 2021, Pages 4153-4170]
  • Tikani, Reza Stress and Vibrational Analysis of Non-Pneumatic Tire and Study the Effect of the Spoke Curvature and Velocity on the Wheel Vibration Using Finite Element Method [Volume 52, Issue 8, 2020, Pages 2213-2230]
  • Tikani, V. Design of a Nonlinear Controller on Quadrotor Drone Using Combined Method of Gradient Particle Swarm Optimization [Volume 50, Issue 5, 2019, Pages 989-998]
  • TIKENE, REZA Nonlinear Modeling and Sensitivity Analysis of a Double-Notch Hydraulic Engine Mount [Volume 48, Issue 4, 2017, Pages 347-354]
  • Tizfahm, Mohammadreza Kinetic modeling of CO2 capture in calcium looping process in the presence of sulfur dioxide based on random pore and fractal-like models [Volume 55, Issue 5, 2023, Pages 659-674]
  • Toghiani, Javad Investigation of Effective Parameters on Dye Removal from Petrochemical Industry Effluents by Fenton and Electro-Fenton Methods [Volume 54, Issue 5, 2022, Pages 947-960]
  • Torabi, Ali Reza Experimental and theoretical investigation of the critical load of U-notched laminated composite specimens under in-plane shear loading [Volume 53, Issue 6, 2021, Pages 3673-3688]
  • Torabi, Ali Reza Experimental and Theoretical Assessment of Mode II Fracture Toughness for Cracked Ductile Specimens with High Strain-Hardening [Volume 53, Issue 10, 2022, Pages 5141-5158]
  • Torabi, Amir Transient numerical modeling and experimental investigation of the effect of surface texture on elastohydrodynamic lubrication [Volume 53, Issue 5 (Special Issue), 2021, Pages 3201-3212]
  • Torabi, A.R. Brittle Fracture in Key-hole Notched Polymer Specimens under Combined Compressive-shear Loading [Volume 50, Issue 5, 2019, Pages 927-942]
  • Torabi, Farshad Introducing a novel strategy to manage lithium-ion cells in fast-charge discharge operations with Model predictive controller [Volume 55, Issue 6, 2023, Pages 677-704]
  • Torabi, K. Thermo-Mechanical Stress Analysis in a Rotating Radially Graded FG-Disc with Non-Uniform Thickness [Volume 50, Issue 1, 2018, Pages 33-46]
  • Torabi, K. Whirling and Stability Analyses of FG-rotors with Variable Diameter Subjected to Axial Load and Torsional Torque [Volume 49, Issue 4, 2018, Pages 759-772]
  • Torabi, Keivan Reinforcement learning-based controller design for a ‎proposed octorotor with tilt-arm angles ‎ [Volume 55, Issue 10, 2024, Pages 1175-1194]
  • Torabi Azad, Masoud Investigation of hydrogen production process by partial oxidation of natural gas in a large non-catalytic reformer and comparison with methane steam reforming process in a small catalytic reformer [Volume 53, Issue 5 (Special Issue), 2021, Pages 3275-3292]
  • Torfeh, Soodeh Performance Evaluation of a Fluidized Bed Reactor by Studying the Hydrodynamics and Thermal Properties of Different Solid Particles [Volume 53, Issue 3, 2021, Pages 1573-1590]
  • Torshizi, Edris Eulerian-Eulerian description of water flow in a backward-facing step with nanofluid blowing [Volume 48, Issue 1, 2016, Pages 93-104]
  • Tourajizadeh, H. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
  • Tourajizadeh, Hami Design, Modeling and Control of a Hybrid Climbing Robot in Manipulation Mode Using Feedback Linearization Control Method [Volume 52, Issue 1, 2020, Pages 57-84]
  • Tourajizadeh, Hami Design, Modeling, and Optimal Position Control of a New Wrist Rehabilitation Robot Using the Stewart Platform [Volume 54, Issue 12, 2023, Pages 2705-2724]
  • Towhidkhah, Farzad Computation algorithms of feasible sets and robust feasible sets for constrained linear time-invariant systems parametrized with orthonormal functions [Volume 51, Issue 3, 2019, Pages 171-180]

V

  • Vaghefi, Reza Investigation of the Effect of Porosity on Thermo-Elastoplastic Bending of Functionally Graded Plates Using 3D Meshless Radial Basis Reproducing Kernel Particle Method [Volume 54, Issue 10, 2023, Pages 2377-2398]
  • Vaghefpour, Hossein Control of a Piezoelectric Nano-Actuator based on Flexoelectric Size-Dependent Theory [Volume 52, Issue 1, 2020, Pages 109-126]
  • Vahdati, Mahdi Statistical analysis and optimization of tensile strength of Al7075 butt joint produced by friction stir welding and submerged friction stir welding via response surface methodology and desirability approach [Volume 53, Issue 4 (Special Issue), 2021, Pages 2719-2734]
  • Vahdati, Mahdi Statistical Analysis and Optimization of Variables Affecting the End Diameter of AISI 304 Steel Tube Produced by Flaring Process [Volume 54, Issue 12, 2023, Pages 2861-2876]
  • Vahdati, Mehrdad Nanometric Finishing of Flat Surfaces Using Magnetic Field [Volume 42, Issue 3, 2011, Pages 39-48]
  • Vahdati, Mehrdad Investigation of Ultra-Precision Machining on Single Crystal Silicon Using Molecular Dynamics Simulation and Experiments [Volume 52, Issue 3, 2020, Pages 731-742]
  • Vahidi, Bahman A FSI Simulation of Thromboembolism in Carotid Artery Bifurcation: Roles of Bifurcation Dividing Angle on Arterial Hemodynamics [Volume 45, Issue 1, 2013, Pages 29-38]
  • Vahidi, Bahman The Effect of Bone Tissue Engineering Scaffold Architecture on Mechanical Modulation of Cell Layer Behavior [Volume 51, Issue 3, 2019, Pages 11-20]
  • Vahidi, Bahman Computational Investigation of the Effect of Adhesion between Cancer Cells and Vessel Walls on the Movement of the Cells in Blood Vessels [Volume 51, Issue 6, 2020, Pages 1271-1288]
  • Vahidi, Bahman Numerical Analysis of a Stented Coronary Artery: Investigating Function of Two Stents with Magnesium and Stainless Steel Materials [Volume 52, Issue 4, 2020, Pages 1055-1076]
  • Vahidi, Bahman An Image-Based Computational Simulation of Pulmonary Embolism Using Radiological Images [Volume 52, Issue 7, 2020, Pages 1847-1864]
  • Vahidi, Bahman Response analysis of primary cilia of the cell to the oscillatory fluid flow by using fluid-structure interaction method [Volume 53, Issue 5 (Special Issue), 2021, Pages 3293-3306]
  • Vahidi, Bahman Computational Fluid Dynamics Analysis of Effects of Housing Expansion Angle, Stroke Volume and Path Length of the Fiber Bundles on Function of the Artificial Lung [Volume 53, Issue 11, 2022, Pages 5389-5408]
  • Vahidi, Bahman Fluid-Structure Interactions Analysis of Tension in An Axon Using Finite Elements Modeling to Investigate Strain Related Neurological Damages [Volume 53, Issue 8, 2021, Pages 4609-4632]
  • Vahidi Bajestani, AmirHusain Point to Point Control of a Liquid Carrying Quadrotor [Volume 54, Issue 4, 2022, Pages 727-746]
  • Vakili Tahami, F. Investigation of the Ratcheting on Corroded Places with Different Shape and Depths in Elbow Pipe under Internal Pressure and Cyclic Bending Moment [Volume 51, Issue 1, 2019, Pages 19-32]
  • Valipour, Mohammad Sadegh A Study of the Relationships between Pressure and Deformation of Surface on Wingsuit Performance [Volume 54, Issue 11, 2023, Pages 2681-2702]
  • Valizadeh, J. Simulation and Optimal Design of Solar Pool for Subsurface Irrigation [Volume 51, Issue 2, 2019, Pages 507-524]
  • Valizadeh, Mohammad Numerical Analysis of the Effect of Natural Convection Heat Transfer on the Gas Turbine Axial Compressor Casing [Volume 52, Issue 4, 2020, Pages 797-812]
  • Varedi-Koulaei, Seyyed Mojtaba A novel objective function for path generation synthesis of the four-bar mechanism with prescribed timing [Volume 55, Issue 12, 2024, Pages 1-1]
  • Varedi Kulaee, Seyed Mojtaba Optimization of the Turbines Locating in the Wind Farm [Volume 52, Issue 9, 2020, Pages 2387-2402]
  • Varedi Kulaee, Seyed Mojtaba Kinematic Optimization of the Stirling engine for Maximum Output Work and Constraint of Occupied Space [Volume 53, Issue 7, 2021, Pages 4455-4480]
  • Varzandian, GholamAli Analytical Solution of Non-Linear Free Vibration of Thin Rectangular Plates with Various Boundary Conditions Based On Non-Local Theory [Volume 48, Issue 4, 2017, Pages 331-346]
  • Varzandian, GholamAli Nonlinear Vibration and Stability Analysis of Thermally Postbuckled Double-Layered Graphene Sheet [Volume 52, Issue 8, 2020, Pages 2177-2194]
  • Vaseghnia, Hamed Study of cavitation inception using multiphase lattice Boltzmann method with incorporating equations of state [Volume 53, Issue 5 (Special Issue), 2021, Pages 3151-3170]
  • Vashahri, Javad Parametric Study of Temperature Field of Impinging Burner of Synthetic Gas by Interferometry Mach-Zehnder Method [Volume 51, Issue 4, 2019, Pages 51-60]
  • Vaziri, Ehsan Modeling of Drilling Cuttings Transport by Foam in Horizontal Well Condition Using Computational Fluid Dynamics [Volume 53, Issue 1 (Special Issue), 2021, Pages 357-374]
  • Veisi, A. Turbulent Structures in the Wake of a Wind Turbine Using Large Eddy Simulation [Volume 51, Issue 2, 2019, Pages 261-280]
  • Velayatimehr, S Design Improvment of GTCP85-180 Micro Gas Turbine Combustor [Volume 49, Issue 3, 2017, Pages 635-642]
  • Vozouhi, hashem Optimal Layout of a Typical Telecommunication Center with the Help of Computational Fluid Dynamics and Artificial Neural Networks [Volume 52, Issue 11, 2021, Pages 2969-2984]

Y

  • Yadavar nikravesh, Seyed majid Looseness Detection and Assessment of Flange Type Joints Using Vibro-Acoustic Modulation Method [Volume 52, Issue 10, 2021, Pages 2661-2678]
  • Yadavar nikravesh, Seyed majid Experimental and Numerical Looseness Detection and Assessment in Flanged Joints Using Vibro-Acoustic Modulation Method [Volume 53, Issue 2 (Special Issue), 2021, Pages 1331-1344]
  • Yaghoobi, Amirhossein Investigating the Effect of Static Pre-Strain on Tension-Compression Mode Properties of Isotropic Magnetorheological Elastomer [Volume 55, Issue 10, 2024, Pages 1233-1260]
  • Yaghoobi, Majid Mixed Finite Element Formulation for 2D Problems Analysis Based on Analytical Solutions of Deferential Equation [Volume 54, Issue 6, 2022, Pages 1443-1458]
  • Yaghoubi, M. Analytical Solution for Temperature, Stress and Displacement Fields for a Hollow Cylinder Subjected to Asymmetric and Time Dependent Heat Flux [Volume 49, Issue 2, 2017, Pages 253-260]
  • Yaldaei, Ali Asghar Investigation of Quality Factor for Linear Vibrations of Rectangular Micro-plates with Thermoelastic Damping [Volume 53, Issue 2, 2021, Pages 851-862]
  • Yan, Jiwang Investigation of Ultra-Precision Machining on Single Crystal Silicon Using Molecular Dynamics Simulation and Experiments [Volume 52, Issue 3, 2020, Pages 731-742]
  • Yarahmadi, Masoud Measurement of subcooled flow boiling heat transfer coefficient in vertical annulus tube [Volume 53, Issue 7, 2021, Pages 4345-4360]
  • Yari, E. Partially Submerged Propeller Analysis in Open Water Condition by Developing Boundary Element Method Based on Potential [Volume 49, Issue 1, 2017, Pages 51-66]
  • Yari, M. Energy and Exergy Analysis of a Two-Stage Thermoelectric Used for Heating and Cooling [Volume 50, Issue 2, 2018, Pages 377-384]
  • Yari, Mortaza Investigation of Performance and Emission Characteristic of a Reactivity Controlled Compression Ignition Engine Fueled By a Mixture of Diesel and Syngas Derived From Biomass Gasification [Volume 53, Issue 1, 2021, Pages 17-30]
  • Yari, Mortaza Experimental study on the enhancement of the thermal efficiency of a household gas water heater [Volume 53, Issue 3 (Special Issue), 2021, Pages 2013-2030]
  • Yari, Morteza Numerical Study on the Enhancement of the Thermal Efficiency of a Household Gas Water Heater and Verification with Experimental Results [Volume 54, Issue 5, 2022, Pages 1199-1220]
  • Yarmohammadi, A. A Coupled Thermal Model for Refrigeration Cycle and Cabin of the First Produced Vehicle Based on the National Vehicle Platform [Volume 50, Issue 6, 2019, Pages 1159-1174]
  • Yarmohammadi, M.javad Assessing short-term storage effects on hydrostatic wind turbine in presence of turbulent wind [Volume 53, Issue 6, 2021, Pages 3431-3444]
  • Yarmohammad Tooski, Mahdi The Effect of Graphene Nanoparticles on the Strength of the Sandwich Panel Structure Inspired by the Dragonfly Wing Vein Microstructure under Quasi-Static Loading [Volume 54, Issue 12, 2023, Pages 2821-2842]
  • Yazdani, Hamidreza Power Improvement of a Commercial Large Scale Vertical-Axis Wind Turbine Using Plasma Actuators [Volume 53, Issue 3, 2021, Pages 1487-1504]
  • Yazdani, Kh. Analysis of Corona Wind Effect on Mass Transfer and Energy Consumption in Drying of Moist Object [Volume 51, Issue 2, 2019, Pages 281-296]
  • Yazdani, Mahdi Approximate Torsional Analysis of Arbitrary Trapezoidal Bars by Kantorovich Method [Volume 53, Issue 10, 2022, Pages 5203-5220]
  • Yazdanifard, Farideh Investigation of using hybrid nanofluid-phase change material spectral splitter in photovoltaic/thermal system [Volume 53, Issue 7, 2021, Pages 4429-4454]
  • Yazdannejad, Javad An Experimental Study on Ratcheting Behavior of Polyacetal Tube Under Uniaxial Ioading and Internal Pressure [Volume 46, Issue 2, 2015, Pages 13-21]
  • Yazdanparast, S. Numerical Study of Turbulence in Diesel Spray Combustion Using Large Eddy Simulation [Volume 50, Issue 4, 2018, Pages 823-836]
  • Yekani Motlagh, Saber Numerical Simulation of Flow, Natural Convection and Distribution of Nano Particles inside Trapezoidal Cavity using Buongiorno’s Model [Volume 52, Issue 9, 2020, Pages 2537-2550]
  • Yousefi, A. Experimental Evaluation of a Point Absorber Wave Energy Converter in a Laboratory Wave Tank [Volume 49, Issue 1, 2017, Pages 93-100]
  • Yousefi, A. Hypersonic Wind Tunnel Diffusers Design Based on Numerical Analysis of Flow Field [Volume 49, Issue 3, 2017, Pages 457-470]
  • Yousefi, Hamid Numerical Study of Lock Exchange Turbidity Current Depositional Behavior in Stratified Environment [Volume 51, Issue 6, 2020, Pages 1235-1252]
  • Yousefi, Soroush Numerical Modeling of the Effect of Inlet Temperature and Pressure on Steam Condensation and Entropy Generation in High-Pressure Separator [Volume 54, Issue 11, 2023, Pages 2601-2620]
  • Yousefirad, S. Experimental Study of Freeing Stuck Pipe by Changing in Characterization and Additives of Mud Cake [Volume 50, Issue 4, 2018, Pages 863-872]
  • Yousefiye, Mohammad Optimization of the PCGTAW Process Parameters for Corrosion Protection of SDSS Weld Pipes by Using Design of Experiment Technique [Volume 43, Issue 2, 2012, Pages 65-74]
  • Yousefzadeh, Shahrouz An Experimental Investigation on Tensile and Impact Properties of Bagasse/Polypropylene Natural Composite [Volume 52, Issue 8, 2020, Pages 2149-2160]

Z

  • Zabetian Targhi, Mohammad Investigation of The Surface Flame Burner Functional Diagram Using Chemiluminescence and Image Analysis [Volume 54, Issue 1, 2022, Pages 235-248]
  • Zabetian Targhi, Mohammad Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
  • Zabetian Toroghi, Mohammad Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Zabetian Toroghi, Mohammad Experimental Investigation of Combustion Species Radiation to Evaluate Equivalence Ratio in a Surface Flame Burner [Volume 53, Issue 1, 2021, Pages 41-52]
  • Zabihian, Ehsan CubeSat antenna vibration control using piezoelectric bender considering system requirements [Volume 53, Issue 4, 2021, Pages 2217-2238]
  • Zafarmand, Bثاقخظ Heat Transfer Enhancement from a Flat Plate by Vortex Shedding Behind a Triangular Obstacle [Volume 41, Issue 2, 2010, Pages 37-46]
  • Zahed, Babak Design and Multi-Objective Optimization of A Magnetohydrodynamic Drug Delivery Infusion Micropump [Volume 53, Issue 10, 2022, Pages 5221-5238]
  • Zahed, Iman Numerical investigation of fluid-structure interaction of a detached flexible plate behind a circular cylinder [Volume 55, Issue 7, 2023, Pages 819-836]
  • Zahedi Nejad, Ali Fabrication and Test of an Axial Wind Turbine with the Most Power During Absorbing Flow Kinetic Energy [Volume 50, Issue 4, 2018, Pages 913-923]
  • Zahedinejhad, parham Large-Amplitude Frequency Analysis of Bi-directional Functionally Graded with Non-Uniform Porous Beams using a Higher Order Shear Deformation Theory [Volume 54, Issue 8, 2022, Pages 1761-1788]
  • Zahedi Siani, Omid Numerical Study on the Complete Separation of Blood Cells using the Integrated Dielectrophoretic-Photophoretic Method in a New Microchannel [Volume 53, Issue 1 (Special Issue), 2021, Pages 655-670]
  • Zahiri, Ramin Thermoeconomic Analysis of a Variable Refrigerant Flow System [Volume 51, Issue 4, 2019, Pages 1-10]
  • Zahmatkesh, Iman Eulerian-Eulerian description of water flow in a backward-facing step with nanofluid blowing [Volume 48, Issue 1, 2016, Pages 93-104]
  • Zahmatkesh, Iman Numerical simulation of nanofluid flow in an annulus with porous baffles based on combination of Darcy-Brinkman-Forchheimer model and two-phase mixture model [Volume 53, Issue 3 (Special Issue), 2021, Pages 1897-1914]
  • Zajkani, Asghar Analysis of Forming Limit of Sheet Metals Considering Vertex Localized Necking and Ductile Damage Criterion [Volume 53, Issue 2 (Special Issue), 2021, Pages 1307-1320]
  • Zakerdoost, H. Multi-objective Optimization of Simultaneous Ship System Design [Volume 49, Issue 3, 2017, Pages 445-456]
  • Zakeri, Mostafa Design of Solid Rocket Booster based on Collaborative Design Theory [Volume 44, Issue 1, 2012, Pages 57-65]
  • Zakerzadeh, Mohammad Reza Finite Element Modeling of a Novel Magnetic Shape Memory Alloy Based Energy Harvester Using a Corrugated Beam and Investigating the Effective Parameters [Volume 53, Issue 2, 2021, Pages 799-814]
  • Zakerzadeh, Mohammad Reza Finite element modeling of shape memory alloy stent insertion in the vessel with consideration of vessel damage [Volume 53, Issue 2 (Special Issue), 2021, Pages 1211-1222]
  • Zakinia, Amir Mohammad Investigating the Effect of Isothermal Channel Height on the Vibrational and Thermal Behavior of Elastically-Mounted Cylinder Affected by Unilateral and Bilateral Jet Flow [Volume 54, Issue 3, 2022, Pages 703-724]
  • Zakizadeh, Mahdi Monitoring and Troubleshooting Alstom Locomotive Blowers using Vibration Analysis and Support Vector Machine [Volume 54, Issue 8, 2022, Pages 1833-1850]
  • Zamani, Ali Stability and bifurcation of a rotating blade with varying speed [Volume 53, Issue 4 (Special Issue), 2021, Pages 2459-2472]
  • Zamani, Jamal An investigation of solid phase distribution in metal foam produced by casting [Volume 44, Issue 2, 2013, Pages 113-119]
  • Zamani, Jamal Examination of RP and RT Technologies in Production of Turbine Blades IC Wax Patterns [Volume 41, Issue 1, 2010, Pages 99-107]
  • Zamani, Mohammad Reza Numerical and Empirical Investigation on Bending Behavior of Composite Bipolar Plates for PEM Fuel Cells [Volume 55, Issue 8, 2023, Pages 995-1008]
  • Zamanian, M. Optimal Control of Electrostatically Actuated Micro-Plate Attached to the End of Microcantilever [Volume 49, Issue 4, 2018, Pages 805-818]
  • Zamanian, Mahdi Vibrations Analysis of a Rotor Supported by Tilting-Pad Journal Bearings with Considering of Geometric Nonlinearity [Volume 52, Issue 1, 2020, Pages 141-154]
  • Zamanian, Rahim Network Modeling to Investigate the Effect of Coupling the Transport Phenomena on Water Distribution in Gas Diffusion Layer [Volume 53, Issue 11, 2022, Pages 5505-5528]
  • Zamani Nejad, Mohammad Electro-mechanical Analysis of Rotating Cylinder Made of Functionally Graded Piezoelectric Materials: Sensor and Actuator [Volume 51, Issue 1, 2019, Pages 215-224]
  • Zamen, M. Energy Simulation and Parametric Analysis of Water Cooled Photovoltaic/Thermal System [Volume 50, Issue 6, 2019, Pages 1361-1374]
  • Zaminpayma, Esmaiel Investigation on Mechanical Properties of Polyoxymethylene Reinforced by Carbon Nanotube Using Molecular Dynamics [Volume 53, Issue 8, 2021, Pages 4691-4700]
  • Zaminpayma, Esmaiel Investigating of the stability and structural, mechanical and electronic properties of two new superhard conductive carbon structures [Volume 55, Issue 10, 2024, Pages 1207-1218]
  • Zamzamian, Seyed AmirHossein Experimental Study of the Stability of Deionized Water Based Copper Oxide Nanofluid and Achievement to the Optimal Stability Conditions [Volume 48, Issue 1, 2016, Pages 17-30]
  • Zandaf, Alireza Numerical Simulation of the Dispersion of Human Sneeze Droplets In The Surrounding [Volume 55, Issue 1, 2023, Pages 85-104]
  • Zandaf, Alireza Numerical simulation of two consecutive human sneezing and examining the dispersion of the resulting droplets in the surroundings [Volume 55, Issue 7, 2023, Pages 875-894]
  • Zandi, Majid Investigation of Corner Radius Effect in a Piezoelectric Ultrasonic Microcontainer to Improve Nanoemulsion Stability [Volume 52, Issue 4, 2020, Pages 1005-1022]
  • Zandi, Majid Experimental study on effective parameters on vertical axis wind turbine performance [Volume 53, Issue 5, 2021, Pages 2771-2790]
  • Zandi Baghche Maryam, A. Using Green Function Method to Dynamic Analysis of Nanotubes Conveying Fluid Under Moving Load [Volume 50, Issue 1, 2018, Pages 137-150]
  • Zanganeh, HR Experimental Study of Foam Generation in a Microfluidic Device [Volume 52, Issue 7, 2020, Pages 1729-1740]
  • Zangeneh, AmirMohammad A Numerical and Experimental Study on Fatigue Crack Growth of Ti-6Al-4V Specimens in Presence of Tensile Residual Stresses [Volume 55, Issue 4, 2023, Pages 543-554]
  • Zangooei, Fatemeh Numerical Investigation of Steam Methane Reforming over Ni- and Rh-based Catalysts to Produce Hydrogen, Syngas and Reduce Surface Coverage [Volume 54, Issue 7, 2022, Pages 1587-1606]
  • Zarafshan, Payam Extended Multiple Impedance Control of a Space Robot with Flexible Members [Volume 45, Issue 2, 2013, Pages 63-75]
  • Zarafshan, Payam Dynamic modeling and control of cleaning robot for agro-photovoltaic [Volume 53, Issue 6, 2021, Pages 3465-3478]
  • Zare dehabadi, Amirabbas Investigation of Macro- Geometric and Micro- Geometric Modification on the Static Transmission Error and Load Sharing Factor of Helical Gears [Volume 51, Issue 3, 2019, Pages 61-70]
  • Zaree, Taleb An Artificial Neural Network Approach for Modeling and Prediction of Energy Consumption in a Seawater Greenhouse [Volume 52, Issue 2, 2020, Pages 437-452]
  • Zareei, A. Determination of Steady State Thermal Stress Intensity Factors for Semi-Elliptical Circumferential Cracks in Cylinders [Volume 49, Issue 4, 2018, Pages 665-672]
  • Zareei, Sayed Mostafa A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems [Volume 52, Issue 7, 2020, Pages 1905-1924]
  • Zare Ghadi, Arian Simulation of the Heating, Ventilation, and Air Conditioning System with Geothermal Energy and Solar Collector [Volume 52, Issue 2, 2020, Pages 347-364]
  • Zareh, Masud Energy and Exergy Analysis of Organic Rankine Cycle Fed by Electric Arc Furnace Waste Heat [Volume 53, Issue 9, 2021, Pages 4999-5016]
  • Zarei, Sajad Stability and Thermodynamic Consistency in the Coexistence Curve Of Liquid-Vapor in A Modified Pseudo-Potential Model [Volume 52, Issue 11, 2021, Pages 3091-3106]
  • Zareienejad, Mohammad Survey, Experiment and Improvement of Micro Actuator Positioning for Precise Grinding by Neural Network [Volume 45, Issue 2, 2013, Pages 87-104]
  • Zare Jafar Abadi, Mahdi Optimization of Segmented Thermoelectric Generator and Calculation of Performance [Volume 45, Issue 1, 2013, Pages 83-91]
  • Zare Mehrjardi, M. Effects of Preload, Speed and Eccentricity Ratio of Rotor on the Thermohydrodynamic Performance of Two Lobe Journal Bearings [Volume 49, Issue 4, 2018, Pages 697-708]
  • Zarepour, Gholamreza Transient Response of Annular Sandwich Plate with Functional Graded Core Combined with Piezoelectric Layers [Volume 52, Issue 12, 2021, Pages 3485-3502]
  • Zarepour, Gholamreza Semi-Analytical Study of Fluid-Induced Nonlinear Vibrations in Viscoelastic Beams with Standard Linear Solid Model Using Multiple Time Scales Method [Volume 53, Issue 10, 2022, Pages 5105-5122]
  • Zare Talab, zeinab Numerical Simulation of Heat Transfer Turbulent Flow for Non-Newtonian Nanofluid in a Double Pipe Helical Heat Exchanger [Volume 53, Issue 1, 2021, Pages 221-240]
  • Zarezadeh mehrizi, mohammad amin Experimental Investigation on the Inter-Laminar Strength in a Hybrid Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity Impact and QuasiStatic Bendin [Volume 52, Issue 10, 2021, Pages 2931-2950]
  • Zeaei, Soroush Simulation of Sperm-Like Microswimmers Using Finite Element Method [Volume 54, Issue 8, 2022, Pages 1719-1736]
  • Zehsaz, M. Investigation of the Ratcheting on Corroded Places with Different Shape and Depths in Elbow Pipe under Internal Pressure and Cyclic Bending Moment [Volume 51, Issue 1, 2019, Pages 19-32]
  • Zehtabiyan-Rezaie, Navid Numerical Investigation of a Pulse-Jet Filter Cleaning System Performance [Volume 51, Issue 6, 2020, Pages 1455-1468]
  • Zeinali Heris, S. The Comparison between Al2O3/water and CuO/water nanofluids experimental heat transfer performance inside triangular duct [Volume 47, Issue 1, 2015, Pages 91-99]
  • Zeinoddini, Mostafa Fatigue Life Estimation of In-Service Welded Patch Using Multiaxial Fatigue Criteria [Volume 54, Issue 12, 2023, Pages 2877-2898]
  • Zeinolabedini, M. R. Free and Forced Whirling Analyses of Rotors with Multiple Unbalanced Discs Under Axial Force [Volume 50, Issue 1, 2018, Pages 175-188]
  • Zera'atgar, Hamid Analysis of Damaged Ship Behavior in Sea Waves [Volume 44, Issue 1, 2012, Pages 79-90]
  • Ziabasharhagh, MASOUD An Investigation of Pollutants Emission of Methane-Air Combustion in Porous Burners (PBs), from the view point of numerical modeling [Volume 41, Issue 2, 2010, Pages 1-10]
  • Ziaee, S. Free Vibration of Heterostructures of Graphene and Boron Nitride in Thermal Environment via Aifantis Theory with Velocity Gradients and Ritz Method [Volume 50, Issue 5, 2019, Pages 1061-1078]
  • Ziaee, Sima The Effect of Small Scale on Torsional Buckling of the Embedded Double- to Five- Walled Nanotubes Under Axial Loading and Thermal Field [Volume 46, Issue 2, 2015, Pages 67-79]
  • Ziaee, Sima Nonlinear Vibration and Stability Analysis of Thermally Postbuckled Double-Layered Graphene Sheet [Volume 52, Issue 8, 2020, Pages 2177-2194]
  • Ziaee Rad, Saeed The Worst Response of Mistuned Bladed Disk System Using Genetic Algorithm [Volume 44, Issue 2, 2013, Pages 41-51]
  • Ziaee Shahraki, A. Modeling of a Gas Pressure Increasing Station's Performance at the Design and off-Design Points [Volume 49, Issue 1, 2017, Pages 113-126]
  • Ziaei, Sima Analytical Solution of Non-Linear Free Vibration of Thin Rectangular Plates with Various Boundary Conditions Based On Non-Local Theory [Volume 48, Issue 4, 2017, Pages 331-346]
  • Ziaei-Rad, Saeed A Review of Studies on the Motion of Particles Under the Influence of Acoustic Waves in Microfluidic Systems [Volume 52, Issue 7, 2020, Pages 1905-1924]
  • Zia Shamami, Mojtaba Experimental and Numerical Investigation into the Effect of Core Density on the Energy Absorption of Sandwich Panels with Aluminum Face Sheets and Polyurethane Foam Core [Volume 52, Issue 10, 2021, Pages 2839-2858]
  • Zibaei, Iman Application of Strain Gradient Elasticity in Analysis of Elastic Properties of Single Walled Carbon Nanotubes [Volume 47, Issue 2, 2016, Pages 53-62]
  • Zirak, Saadat Numerical Investigation of the Effect of Coolant Injection Angle on the Pulsed Film Cooling Effectiveness of Square Wave Flow on Flat Plate [Volume 52, Issue 6, 2020, Pages 1641-1658]
  • Ziyaee Rad, Saeid Simulation of Chatter in Cold Rolling Strip using Finite Element Method [Volume 42, Issue 1, 2011, Pages 89-97]
  • Ziyafat Doust Abed, Mohammad Buckling Analysis of Embedded Functionally Graded Graphene Platelet-Reinforced Porous Nanocomposite Plates with Various Shapes Using the P-Ritz Method [Volume 54, Issue 4, 2022, Pages 859-884]
  • Ziyafat Doust Abed, Mohammad Free Vibrations of Embedded Functionally Graded Graphene Platelets Reinforced Porous Nanocomposite Plates with Various Shapes Using P-Ritz Method [Volume 54, Issue 2, 2022, Pages 391-414]
  • Ziya-Shamami, Mojtaba Experimental investigation and mathematical modeling of the response of circular metallic plates under successive intense dynamic loading [Volume 53, Issue 6 (Special Issue), 2021, Pages 4023-4050]
  • Zoghi, T. New Design of Cross-flow Fluidized Bed Dryers [Volume 50, Issue 6, 2019, Pages 1351-1360]
  • Zohrevandi, Delaram Design, Fabrication and Experimental Study of Spiral Microchannel Particle Separator on Centrifugal Microfluidic Platforms [Volume 53, Issue 3, 2021, Pages 1359-1372]
  • Zolfaghari, Alireza Evaluating the effect of non-uniform summer wearing on local thermal sensation of passengers in a bus under two common ventilation systems [Volume 51, Issue 4, 2019, Pages 11-20]
  • Zolfaghari, Alireza Evaluation of the Impact of Fan Coil Airflow Velocity on the Micron Particles Distribution in the Human Breathing Zone [Volume 52, Issue 6, 2020, Pages 1675-1686]
  • Zolfaghari, Alireza A New Index for Evaluating Thermal Sensation Based on the Principles of Non- Fourier Heat Transfer [Volume 52, Issue 9, 2020, Pages 2597-2608]
  • Zolfaghari, Alireza Effect of Air Curtain on Occupants Thermal Comfort and Indoor Air Quality in an Athletic Swimming Pool with Spectators’ Stand [Volume 53, Issue 1, 2021, Pages 191-208]
  • Zolfaghari, Alireza Experimental Investigation of the Effects of Inlet Cooling Air Temperature on the Occupants’ Local Thermal Sensation in the Under-Floor Air Distribution System [Volume 53, Issue 3, 2021, Pages 1537-1548]
  • Zolfaghari, Alireza Effect of Gender and Body Fitness on the Thermal Sensation of Sleeping Occupants Under Task-Ambient Air Conditioning System [Volume 53, Issue 1 (Special Issue), 2021, Pages 453-466]
  • Zolfaghari, Alireza Developing an alternating direction explicit-implicit domain-decomposition approach to solve heat transfer equation on graphics processing unit [Volume 53, Issue 3 (Special Issue), 2021, Pages 1915-1936]
  • Zolfaghari, Alireza Experimental evaluation of the effect of supply air direction on air current and temperature in a room with underfloor air distribution system [Volume 53, Issue 5, 2021, Pages 3057-3076]
  • Zolfaghari, Alireza Experimental investigation of personalized ventilation effects on temperature, velocity, and draught discomfort distribution in an office [Volume 53, Issue 7, 2021, Pages 4397-4410]
  • Zolfaghari, Mojtaba Investigation of Mechanical Behavior of Boron Nitride Nanotubes -Reinforced Magnesium Nanocomposite Using Molecular Dynamics Simulations [Volume 54, Issue 2, 2022, Pages 451-464]
  • Zolfaghari, Mojtaba Numerical Investigation of Elastoplastic and Damage Behavior of Cortical Bone by Applying a New Damage Model [Volume 54, Issue 6, 2022, Pages 1423-1442]
  • Zolfaghari, S. A. Evaluating the Effects of Individual Characteristics on Thermal Sensation in an Indoor Pool with Different Arrangements for Inlet Air Diffusers [Volume 50, Issue 6, 2019, Pages 1175-1184]
  • Zolfagharian, Mohammad Mehdi Manufacturing and Testing of an Optimized Magneto-Rheological Fluid and Modelling of a Twin Tube Magneto-Rheological Damper Using a Modified Non-Newtonian Model Using Analytical Quasi-Static, Analytical Unsteady, Numerical and Experimental Methods [Volume 53, Issue 3, 2021, Pages 1373-1400]
  • Zysset, Philippe Mechanical Properties and Structural Behavior of Bone at Nano Scale with Cohesive Element [Volume 53, Issue 2, 2021, Pages 745-776]